TIA-1165 000-A-2012 cdma2000 Femtocell Network Overview《Cdma2000 Femtocell网络 概述》.pdf

1、 TIA-1165.000-A April 2012cdma2000 Femtocell Network: Overview NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assi

2、sting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of TIA from manufacturing or selling products not conforming to such Standards a

3、nd Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By

4、 such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems associated with its use or all applicable regulatory requirements. It is the

5、responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Project No. 3-0355.000-RV1, formulated under the cognizance of the TIA TR-45 Mobile (b) there is no assurance that the D

6、ocument will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property

7、 rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is r

8、equested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to th

9、e parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. If

10、 the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference consists of

11、 mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encourag

12、ement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essent

13、ial Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTI

14、ES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPR

15、ESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOC

16、UMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLU

17、DING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL

18、 ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. 3GPP2 X.S0059-000-A v1.0 Revision History Revision Description of Changes Date Rev. 0 v1.0 Initial Publication January 2010 Rev. A v1.0 Updated Publication December 2011 3GPP2 X.S00

19、59-000-A v1.0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 000-i Contents cdma2000 Femtocell Network: Overview CONTENTS List of Figures .iii List of Tables.iv Foreword v 1 Intro

20、duction1 1.1 Scope1 1.2 Document Conventions1 2 References2 2.1 Normative References2 3 Definitions and Abbreviations .3 3.1 Definitions .3 3.2 Abbreviations.3 4 List of Parts 6 5 Architectural Model and Reference Points.7 5.1 Femtocell cdma2000 1x Circuit Service Architecture .7 5.1.1 IMS-based Fem

21、tocell cdma2000 1x Circuit Service Architecture with MSC.7 5.1.2 IMS-based Femtocell cdma2000 1x Circuit Service Architecture with MSCe .8 5.1.3 IOS-based Femtocell cdma2000 1x Circuit Service Architecture with MSC8 5.1.4 IOS-based Femtocell cdma2000 1x Circuit Service Architecture with MSCe9 5.1.5

22、Network Entities10 5.1.6 Reference Points11 5.1.7 Protocol Descriptions 12 5.1.7.1 FIAP (Femtocell IOS Application Protocol) 12 5.1.7.2 FIAPCP (FIAP Convergence Protocol) 12 5.1.7.3 FCP (Femtocell Control Protocol) 12 5.1.7.4 FCPCP (FCP Convergence Protocol) 13 5.1.7.5 FIAP/FIAPCP Transport Protocol

23、s 13 5.1.7.6 FCP/FCPCP Transport Protocols 13 5.1.8 cdma2000 1x Circuit Protocol Stack .14 5.1.8.1 IMS-based Femtocell Architecture 14 5.1.8.2 IOS-based Femtocell Architecture 15 5.2 HRPD/cdma2000 1x Packet Data Femtocell Architecture 17 5.2.1 Network Entities17 5.2.2 Reference Points18 5.2.3 Protoc

24、ol Stack19 3GPP2 X.S0059-000-A v1.0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 Contents 000-ii 5.2.3.1 Control Plane 19 5.2.3.2 User Plane 20 5.3 eHRPD Femtocell Architecture

25、.20 5.3.1 Network Entities 21 5.3.2 Reference Points 22 5.3.3 Protocol Stack22 3GPP2 X.S0059-000-A v1.0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 000-iii List of Figures LIST

26、 OF FIGURES Figure 1 IMS-based cdma2000 1x Circuit Service Femtocell Network Architecture with MSC.7 Figure 2 IMS-based cdma2000 1x Circuit Service Femtocell Network Architecture with MSCe .8 Figure 3 IOS-based cdma2000 1x Circuit Service Femtocell Network Architecture with MSC9 Figure 4 IOS-based c

27、dma2000 1x Circuit Service Femtocell Network Architecture with MSCe .10 Figure 5 Control Plane between MS and FCS for Voice/SMS.14 Figure 6 User Plane between MS and MGW for Voice .14 Figure 7 Control Plane Protocol Stacks when the FGW Uses A1p to the MSCe .15 Figure 8 User Plane Protocol Stacks whe

28、n the FGW Uses A1p to the MSCe15 Figure 9 Control Plane Protocol Stacks when the FGW Uses A1 to the MSC.16 Figure 10 User Plane Protocol Stacks when the FGW Uses A1 to the MSC .16 Figure 11 Protocol Stacks for FCP (FCP and FCP/FCPCP Transport) 16 Figure 12 HRPD/cdma2000 1x Packet Femtocell Network A

29、rchitecture 17 Figure 13 Control Plane between FAP and SeGW.19 Figure 14 Control Plane Between FAP, FGW, and PDSN.19 Figure 15 Control Plane Between MS and PDSN 20 Figure 16 User Plane 20 Figure 17 eHRPD Femtocell Network Architecture.21 X.S0059-000-A v1.0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 1

30、8 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 List of Tables 000-iv LIST OF TABLES Table 1 List of Parts 6 3GPP2 X.S0059-000-A v1.0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33

31、 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 000-v Foreword FOREWORD (This foreword is not part of this specification.) This document was prepared by the Third Generation Partnership Project 2 (3GPP2) TSG-X Working Group. This document is a new specification. This d

32、ocument is part of a multi-part document. The multiple parts together specify the cdma20001Femtocell Network. This document is subject to change following formal approval procedures. Should this document be modified in the future, it will be re-released with a change-of-release date and an identifyi

33、ng change in version number as follows: X.S0059-000-X-n where: X: a numerical or uppercase alphabetic character A, B, C, that indicates the revision level; n: a numeric string 1, 2, 3, that indicates the point release level. 1cdma2000 is the trademark for the technical nomenclature for certain speci

34、fications and standards of the Organizational Partners (OPs) of 3GPP2. Geographically (and as of the date of publication), cdma2000 is a registered trademark of the Telecommunications Industry Association (TIA-USA) in the United States. X.S0059-000-A v1.0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

35、 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 Foreword 000-vi This page is intentionally left blank. 3GPP2 X.S0059-000-A v1.0 4 5 6 7 10 11 12 13 14 15 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 4

36、1 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 1 Introduction 000-1 1 2 3 1 Introduction 8 9 16 17 This document provides an overview of the series of documents that specify the HRPD, eHRPD, and cdma2000 1x Femtocell network. 1.1 Scope This series of documents defines an architecture model

37、and set of specifications for an HRPD, eHRPD, and cdma2000 1x Femtocell network that can support existing services provided by HRPD, eHRPD, and cdma2000 1x. 1.2 Document Conventions “Shall” and “shall not” identify requirements to be followed strictly to conform to this document and from which no de

38、viation is permitted. “Should” and “should not” indicate that one of several possibilities is recommended as particularly suitable, without mentioning or excluding others, that a certain course of action is preferred but not necessarily required, or that (in the negative form) a certain possibility

39、or course of action is discouraged but not prohibited. “May” and “need not” indicate a course of action permissible within the limits of the document. “Can” and “cannot” are used for statements of possibility and capability, whether material, physical or causal. X.S0059-000-A v1.0 1 2 3 4 5 6 7 8 9

40、10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 000-2 2 References2 References 2.1 Normative References This section provides references to other specifications and standards that are necessary to i

41、mplement this document. References are either specific (identified by date of publication, revision identifier, and version number) or non-specific. For a specific reference, subsequent revisions may not apply. For a non-specific reference, the latest revision applies. X.S0002 3GPP2: X.S0002-0 v2.0,

42、 “MAP Location Services Enhancements”; June 2006. X.S0024 3GPP2: X.S0024-0 v1.0, “IP-Based Location Services”; November 2005. C.S0022 3GPP2: C.S0022-B v1.0, “Position Determination Service for cdma2000 Spread Spectrum Systems”; April 2009. J-STD-036 Joint ATIS/TIA: J-STD-036-C, “Enhanced Wireless 9-

43、1-1 Phase II”; January 2009. TS23.002 3GPP: TS 23.002 v9.1.0, “Network Architecture (Release 9)”; September 2009. X.S0011 3GPP2: X.S0011-E v1.0, “cdma2000 Wireless IP Network Standard”; November 2009. A.S0024 3GPP2: A.S0024-A v1.0, “Interoperability Specification (IOS) for Femtocell Access Points”;

44、April, 2011. A.S0012 3GPP2: A.S0012-C v3.0, “Interoperability Specification (IOS) for cdma2000 Access Network Interfaces Part 2 Transport”; September 2010. A.S0014 3GPP2: A.S0014-C v3.0, “Interoperability Specification (IOS) for cdma2000 Access Network Interfaces Part 4 (A1, A1p, A2, and A5 Interfac

45、es)”; September 2010. A.S0022 3GPP2: A.S0022-A v1.0, “Interoperability Specification (IOS) for Evolved High Rate Packet Data (eHRPD) Radio Access Network Interfaces and Interworking with Enhanced Universal Terrestrial Radio Access Network (E-UTRAN)”; February 2011. X.S0057 3GPP2: X.S0057, “E-UTRAN e

46、HRPD Connectivity and Interworking: Core Network Aspects”. X.S0059-100 3GPP2: X.S0059-100-A, “cdma2000 Femtocell Network: Packet Data Network Aspects”. X.S0059-200 3GPP2: X.S0059-200-A, “cdma2000 Femtocell Network: 1x and IMS Network Aspects”. X.S0059-400 3GPP2: X.S0059-400-0, “cdma2000 Femtocell Ne

47、twork: Overview”. 3GPP2 X.S0059-000-A v1.0 4 5 6 7 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 47 48 49 50 51 52 53 54 55 56 57 58 59 3 Definitions and Abbreviations 000-3 1 2 3 3 Definitions and Abbreviations 8 9 45 46 This section provid

48、es definitions, symbols and abbreviations that are used throughout the document. 3.1 Definitions For the purposes of this document, the following definitions apply. Femtocell Access Point (FAP) A Femtocell Access Point (FAP) provides cdma2000 coverage in a small area, usually a private residence or

49、a small office, and connects the MS to an operators network via a broadband IP connection (e.g., DSL, cable). The FAP may operate in cdma2000 1x mode, HRPD mode, eHRPD mode, or any combination thereof. The FAP, when operating in eHRPD mode, is referred to as an eFAP. Femtocell Access Control This function allows any MS that is part of the Access Control List (ACL) for a FAP to access services through that FAP. The types of Femtocell access control include open association, restricted association, and signaling association. Open Associatio