TIA-1202-2011 1x Calling Party Number Presentation (CPNP) during e1xCSFB Stage 1 Requirements《e1xCSFB期间1x呼叫方号码显示(CPNP) 第1阶段的要求》.pdf

1、 TIA-1202 April 20111x Calling Party Number Presentation (CPNP) during e1xCSFBStage 1 Requirements NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability a

2、nd improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of TIA from manufacturing or selling product

3、s not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accordance with the American National Standard

4、s Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems associated with its use or all applicable

5、 regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Project No. 3-0410, formulated under the cognizance of the TIA TR-45 Mobile (b) ther

6、e is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the

7、use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement

8、from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions,

9、which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the

10、Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whethe

11、r such reference consists of mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference;

12、ii) TIAs policy of encouragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification

13、 to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents o

14、f the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTU

15、AL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SE

16、RVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR

17、CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION

18、 OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. 3GPP2 S.R0144-0 v1.0 REVISION HISTORY Revision Description of Changes Date Rev 0 v1.0 Initial Publication March 31, 2011 3GPP2 S.R0144-0 v1.0 i Table of

19、Contents 1 2 1 INTRODUCTION AND SCOPE .1 3 2 INFORMATIVE REFERENCES 1 4 3 DEFINITIONS AND ABBREVIATIONS .1 5 3.1 Definitions 1 6 3.2 Abbreviations 1 7 4 GENERAL FEATURE DESCRIPTION .2 8 5 DETAILED REQUIREMENTS 2 9 10 3GPP2 S.R0144-0 v1.0 ii 1 2 This page is intentionally left blank. 3 4 5 6 3GPP2 S.

20、R0144-0 v1.0 iii Foreword 1 2 This foreword is not part of this specification. 3 4 This document specifies the system requirements for Calling Party Number 5 Presentation (CPNP) for Enhanced 1x Circuit Switched Fallback e1xCSFB 6 from LTE. 7 8 3GPP2 S.R0144-0 v1.0 1 1 INTRODUCTION AND SCOPE 1 This d

21、ocument specifies the system requirements for Calling Party 2 Number Presentation (CPNP) for Enhanced 1x Circuit Switched Fallback 3 e1xCSFB from LTE. This feature allows the network to deliver calling 4 party information to the UE for mobile terminated e1xCSFB call so that 5 the user can choose to

22、accept or reject the call. 6 7 2 INFORMATIVE REFERENCES 8 References are either specific (identified by date of publication, revision 9 identifier, and version number) or non-specific. For a specific reference, 10 subsequent revisions may not apply. For a non-specific reference, the 11 latest revisi

23、on applies. 12 The document references which are applicable to this specification 13 include the following: 14 1 3GPP TS 23.272, 3rd Generation Partnership Project; Technical 15 Specification Group Services and Systems Aspects; Circuit Switched 16 (CS) fallback in Evolved Packet System (EPS). 17 3 D

24、EFINITIONS AND ABBREVIATIONS 18 The terms and abbreviations which are used within this specification are 19 defined as follows: 20 3.1 Definitions 21 Calling Party Number Presentation: is a feature which enables the 22 calling party information being presented to the user in a mobile 23 terminated p

25、rocedure with e1xCSFB. 24 3.2 Abbreviations 25 The terms and abbreviations which are used within this specification are 26 defined as follows: 27 28 3GPP2 S.R0144-0 v1.0 2 1 Term Definition 1x cdma20001 1x 1x CS 1x Circuit Switched 3GPP2 Third Generation Partnership Project 2 BSC Base Station Contro

26、ller CPNP Calling Party Number Presentation e1xCSFB Enhanced 1x Circuit Switched Fallback IWS Interworking Solution LTE Long Term Evolution UE User Equipment 4 GENERAL FEATURE DESCRIPTION 2 Calling Party Number Presentation is a fundamental feature in the native 3 1x system, which allows the UE to a

27、lert the user with calling party 4 number. The user determines whether or not to answer the call based on 5 this information. CPNP for e1xCSFB intends to mimic the CPNP feature 6 of 1x system for an e1xCSFB capable UE. 7 5 DETAILED REQUIREMENTS 8 CPNP-01: The network shall deliver the calling party

28、information to the 9 UE if the calling party information is available for the case of mobile 10 terminated e1xCSFB. 11 CPNP-02: If calling party information is received from the core network, 12 the UE shall present it to the user before the call is answered by the 13 user. The user shall be able to

29、 answer or reject the call based on the 14 calling party information. 15 CPNP-03: Impact to legacy cdma2000 circuit switched core network 16 and RAN should be minimized. 17 CPNP-04: This feature shall be applicable for both standalone IWS and 18 integrated IWS/BSC architecture that support e1xCSFB.

30、19 20 1 cdma2000 is the trademark for the technical nomenclature for certain specifications and standards of the Organizational Partners (OPs) of 3GPP2. Geographically (and as of the date of publication), cdma2000 is a registered trademark of the Telecommunications Industry Association (TIA-USA) in the United States. 3GPP2 S.R0144-0 v1.0 3 1 This page is intentionally left blank. 2 3