TIA-1214-A-1[E]-2014 Recommended Minimum Performance Standards for Simultaneous cdma2000 1x and cdma2000 HRPD Access Terminal (Incorporates Addendum 1).pdf

1、 TIA-1214-A-1E September 2014Recommended Minimum Performance Standards for Simultaneous cdma2000 1x and cdma2000 HRPD Access Terminal NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers

2、, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of TIA fr

3、om manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accordance

4、with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems associ

5、ated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. Any use of trademarks in this document are for informat

6、ion purposes and do not constitute an endorsement by TIA or this committee of the products or services of the company. (From Project No. TIA-PN-1214-A-1E, formulated under the cognizance of the TIA TR-45 Mobile (b) there is no assurance that the Document will be approved by any Committee of TIA or a

7、ny other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents,

8、 or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA take

9、s no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge wheth

10、er proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. If the Document contains one or more Normative Referenc

11、es to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as define

12、d in the TIA Procedures for American National Standards) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see TIA Pr

13、ocedures for American National Standards Annex C.1.2.3) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essential Patent(s)

14、 or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS O

15、R IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAI

16、MS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PROD

17、UCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES

18、FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF T

19、HE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. 3GPP2 C.S0096-A v2.0 Revision History Revision Description of Changes Date Rev 0 v1.0 Initial publication January 2011 Rev A v1.0 Added Japan Radio Law related changes, including BC6 emission, B

20、C3 disband, and BC0 subclasses 2,3 April 2012 Rev A v2.0 Bug fixes. March 2014 Rev A v2.0 Republication to fix missing reference July 2014 3GPP2 C.S0096-A v2.0 i CONTENTS 1 Foreword ix 2 Notes xi 3 1 Introduction 1-1 4 1.1 Scope 1-1 5 1.1.1 Requirements Terminology 1-1 6 1.2 Terms and Definitions .

21、1-1 7 1.3 CDMA and HRPD Equations 1-2 8 1.4 Tolerances . 1-2 9 1.4.1 CDMA and HRPD System Parameter Tolerances 1-2 10 1.4.2 Measurement Tolerances . 1-2 11 1.5 References . 1-2 12 2 Standard Radiated Emissions Measurement Procedure . 2-1 13 2.1 Standard Radiation Test Site . 2-1 14 2.2 Search Antenn

22、a . 2-1 15 2.3 Field-Strength Measurement . 2-2 16 2.4 Frequency Range of Measurements . 2-2 17 2.5 Test Ranges . 2-2 18 2.5.1 30-Meter Test Range 2-2 19 2.5.2 3-Meter Test Range 2-2 20 2.6 Radiated Signal Measurement Procedures . 2-3 21 3 Physical Layer Receiver Minimum Standards 3-1 22 3.1 Demodul

23、ation Requirements for SB-CDMA-HRPD . 3-1 23 3.1.1 Demodulation of Forward Traffic Channel in AWGN . 3-1 24 3.1.1.1 Definition . 3-1 25 3.1.1.2 Method of Measurement 3-1 26 3.1.1.3 Minimum Standard for HRPD 3-2 27 3.1.1.4 Minimum Standard for CDMA 3-3 28 3.2 Demodulation Requirements for DB-CDMA-HRP

24、D 3-3 29 3.2.1 Demodulation of Forward Traffic Channel in AWGN . 3-3 30 3.2.1.1 Definition . 3-3 31 3GPP2 C.S0096-A v2.0 ii 3.2.1.2 Method of Measurement 3-3 1 3.2.1.3 Minimum Standard for HRPD 3-5 2 3.2.1.4 Minimum Standard for CDMA . 3-5 3 3.3 Receiver Performance for SB-CDMA-HRPD 3-5 4 3.3.1 Rece

25、iver Sensitivity and Dynamic Range . 3-5 5 3.3.1.1 Definition 3-5 6 3.3.1.2 Method of Measurement 3-5 7 3.3.1.3 Minimum Standard . 3-7 8 3.3.2 Single Tone Desensitization . 3-7 9 3.3.2.1 Definition 3-7 10 3.3.2.2 Method of Measurement 3-8 11 3.3.2.3 Minimum Standard . 3-10 12 3.4 Receiver Performanc

26、e for DB-CDMA-HRPD . 3-11 13 3.4.1 Receiver Sensitivity and Dynamic Range . 3-11 14 3.4.1.1 Definition 3-11 15 3.4.1.2 Method of measurement 3-11 16 3.4.1.3 Minimum Standard . 3-15 17 3.4.2 Single Tone Desensitization . 3-15 18 3.4.2.1 Definition 3-15 19 3.4.2.2 Method of Measurement 3-16 20 3.4.2.3

27、 Minimum Standard . 3-18 21 4 Physical Layer Transmitter Minimum Standards . 4-1 22 4.1 Modulation Requirements for SB-CDMA-HRPD . 4-1 23 4.1.1 Waveform Quality and Frequency Accuracy . 4-1 24 4.1.1.1 Definition 4-1 25 4.1.1.2 Method of Measurement 4-1 26 4.1.1.3 Minimum Standard . 4-3 27 4.2 Modula

28、tion Requirements for DB-CDMA-HRPD 4-3 28 4.2.1 Waveform Quality and Frequency Accuracy . 4-3 29 4.2.1.1 Definition 4-3 30 4.2.1.2 Method of Measurement 4-3 31 4.2.1.3 Minimum Standard . 4-5 32 3GPP2 C.S0096-A v2.0 iii 4.3 RF Output Power Requirements for SB-CDMA-HRPD 4-6 1 4.3.1 Maximum RF Output P

29、ower 4-6 2 4.3.1.1 Definition . 4-6 3 4.3.1.2 Method of Measurement 4-6 4 4.3.1.3 Minimum Standard 4-8 5 4.4 RF Output Power Requirements for DB-CDMA-HRPD 4-10 6 4.4.1 Maximum RF Output Power 4-10 7 4.4.1.1 Definition . 4-10 8 4.4.1.2 Method of Measurement 4-10 9 4.4.1.3 Minimum Standard 4-12 10 4.5

30、 Limitations on Emissions for SB-CDMA-HRPD 4-14 11 4.5.1 Conducted Spurious Emissions . 4-14 12 4.5.1.1 Definition . 4-14 13 4.5.1.2 Method of Measurement 4-14 14 4.5.1.3 Minimum Standard 4-16 15 4.5.2 Occupied Bandwidth . 4-19 16 4.5.2.1 Definition . 4-19 17 4.5.2.2 Method of Measurement 4-19 18 4.

31、5.2.3 Minimum Standard 4-21 19 4.6 Limitations on Emissions for DB-CDMA-HRPD 4-22 20 4.6.1 Conducted Spurious Emissions . 4-22 21 4.6.1.1 Definition . 4-22 22 4.6.1.2 Method of Measurement 4-22 23 4.6.1.3 Minimum Standard 4-25 24 4.6.2 Occupied Bandwidth . 4-32 25 4.6.2.1 Definition . 4-32 26 4.6.2.

32、2 Method of Measurement 4-32 27 4.6.2.3 Minimum Standard 4-35 28 5 Environmental Requirements 5-1 29 5.1 Temperature and Power Supply Voltage. 5-1 30 5.1.1 Definition . 5-1 31 5.1.2 Method of Measurement 5-1 32 3GPP2 C.S0096-A v2.0 iv 5.1.3 Minimum Standard . 5-2 1 5.2 High Humidity 5-2 2 5.2.1 Defi

33、nition 5-2 3 5.2.2 Method of Measurement 5-3 4 5.2.3 Minimum Standard . 5-3 5 5.3 Vibration Stability . 5-3 6 5.3.1 Definition 5-3 7 5.3.2 Method of Measurement 5-3 8 5.3.3 Minimum Standard . 5-3 9 5.4 Shock Stability 5-3 10 5.4.1 Definition 5-3 11 5.4.2 Method of Measurement 5-3 12 5.4.3 Minimum St

34、andard . 5-4 13 6 Standard Test Conditions . 6-1 14 Annex A Selected Performance Requirements Tables (Normative) . A-1 15 A.1 Demodulation Requirements for HRPD . A-1 16 A.1.1 Demodulation of Forward Traffic Channel in AWGN A-1 17 A.1.1.1 Method of Measurement A-1 18 A.1.1.2 Minimum Standard for HRP

35、D in SB-CDMA-HRPD A-2 19 A.1.1.3 Minimum Standard for HRPD in DB-CDMA-HRPD A-3 20 A.2 CDMA Forward Traffic Channel Demodulation Performance Tables A-5 21 A.2.1 Forward Traffic Channel Performance Requirements in AWGN A-5 22 A.2.1.1 Method of Measurement Test Parameters A-5 23 A.2.1.2 Minimum Standar

36、ds Requirements . A-8 24 25 26 3GPP2 C.S0096-A v2.0 v TABLES 1 Table 3.3.1.2-1. Test Parameters for Receiver Sensitivity (Test 2) and Dynamic Range (Test 2 1) 3-7 3 Table 3.3.2.2-1. Test Parameters for Single Tone Desensitization for CDMA-HRPD operation4 . 3-10 5 Table 3.3.2.2-2. Minimum Effective R

37、adiated Power for Single Tone Desensitization Test for 6 Band Class 3 3-10 7 Table 3.4.1.2-1. Test Parameters for Receiver Sensitivity (Test 3) and Dynamic Range (Tests 8 1, 2) 3-14 9 Table 3.4.1.2-2. Test Parameters for Receiver Sensitivity (Test 5) and Dynamic Range (Test 10 4) 3-15 11 Table 3.4.2

38、.3-1. Test Parameters for CDMA carrier Single Tone Desensitization in B1 . 3-19 12 Table 3.4.2.3-2. Minimum Effective Radiated Power for CDMA carrier Single Tone 13 Desensitization Test for B1 = Band Class 3 and for HRPD carrier Single Tone 14 Desensitization Test for B2 = Band Class 3. 3-19 15 Tabl

39、e 3.4.2.3-3. Test Parameters for HRPD carrier Single Tone Desensitization in B2 3-20 16 Table 3.4.2.3-4. Test Parameters for HRPD carrier Single Tone Desensitization for Multi-17 carrier HRPD Operation (Subtype 3 Physical Layer) 3-21 18 Table 4.3.1.3-1. Test Parameters for Maximum RF Output Power wi

40、th a Single Traffic Code 19 Channel, Spreading Rate 1 . 4-8 20 Table 4.3.1.3-2. Effective Radiated Power at Maximum Output Power . 4-9 21 Table 4.4.1.2-1. Test Parameters for CDMA channel 4-12 22 Table 4.4.1.3-1. Effective Radiated Power at Maximum Output Power . 4-13 23 Table 4.5.1.2-1. Test Parame

41、ters for Testing Spurious Emissions with a Single Traffic Code 24 Channel at Maximum RF Output Power 4-16 25 Table 4.5.1.3-1. Band Classes 0, 2, 3, 5, 7, 9, 10, 11, and 12 Transmitter Spurious 26 Emission Limits for Test 1 . 4-17 27 Table 4.5.1.3-2. Band Classes 1, 4, 6, and 8 Transmitter Spurious E

42、mission Limits for Test 28 1 . 4-17 29 Table 4.5.1.3-3. Adjacent Multi-carrier Transmitter Spurious Emission Limits for Number 30 of adjacent reverse CDMA channels, N = 3 4-18 31 Table 4.5.1.3-4. Adjacent Multi-carrier Transmitter Spurious Emission Limits for Number 32 of adjacent reverse CDMA chann

43、els, N 3 4-19 33 Table 4.5.2.3-1. Test Parameters for Testing Occupied Bandwidth at Maximum RF Output 34 Power 4-22 35 Table 4.6.1.2-1. Test Parameters for CDMA channel 4-24 36 3GPP2 C.S0096-A v2.0 vi Table 4.6.1.3-1. Band Classes 0, 2, 5, 7, 9, 10, 11, and 12 Transmitter Spurious Emission 1 Limits

44、. 4-25 2 Table 4.6.1.3-2. Band Classes 1, 4, 6, 8 and 13 Transmitter Spurious Emission Limits 4-26 3 Table 4.6.1.3-3. Band Class 3 Transmitter Spurious Emission Limits . 4-27 4 Table 4.6.1.3-4. Additional Band Class 6 Transmitter Spurious Emission Limits 4-28 5 Table 4.6.1.3-5. Additional Band Class

45、 11 and 12 Transmitter Spurious Emission Limits 4-6 28 7 Table 4.6.1.3-6. Additional Band Class 7 Transmitter Spurious Emission Limits 4-29 8 Table 4.6.1.3-7. Band Classes 0, 2, 3, 5, 7, 9, 10, 11, and 12 Transmitter Spurious 9 Emission Limits 4-29 10 Table 4.6.1.3-8. Band Classes 1, 4, 6, and 8 Tra

46、nsmitter Spurious Emission Limits . 4-30 11 Table 4.6.1.3-9. Adjacent Multi-carrier Transmitter Spurious Emission Limits for Number 12 of adjacent reverse CDMA channels, N = 3 4-31 13 Table 4.6.1.3-10. Adjacent Multi-carrier Transmitter Spurious Emission Limits for Number 14 of adjacent reverse CDMA

47、 channels, N 3 . 4-32 15 Table 4.6.2.3-1. Test Parameters for Testing Occupied Bandwidth at Maximum RF Output 16 Power . 4-35 17 Table 5.1.1-1. Temperature Ranges. 5-1 18 Table A.1.1.1-1. Test Parameters for FTC Demodulation in AWGN (Part 1 of 3) . A-1 19 Table A.1.1.1-2. Test Parameters for FTC Dem

48、odulation in AWGN (Part 2 of 3) . A-1 20 Table A.1.1.1-3 Test Parameters for FTC Demodulation in AWGN (Part 3 of 3) A-2 21 Table A.1.1.2-1. Minimum Standards for Forward Traffic Channel Performance in AWGN 22 (Part 1 of 4) . A-2 23 Table A.1.1.2-2. Minimum Standards for Forward Traffic Channel Perfo

49、rmance in AWGN 24 (Part 2 of 4) . A-3 25 Table A.1.1.2-3. Minimum Standards for Forward Traffic Channel Performance in AWGN 26 (Part 3 of 4) . A-3 27 Table A.1.1.2-4. Minimum Standards for Forward Traffic Channel Performance in AWGN 28 (Part 4 of 4) . A-3 29 Table A.1.1.3-1. Minimum Standards for Forward Traffic Channel Performance in AWGN 30 (Part 1 of 6) . A-3 31 Table A.1.1.3-2. Minimum Standards for Forward Traffic Channel Performance in AWGN 32 (Part 2 of 6) . A-4 33 Table A.1.1.3-3. Minimum Standards for Forward Traffic Channel Performance in AWGN 34 (Part 3 of 6) . A-4 35 3G