TIA-136-033-A-2002 TDMA Third Generation Wireless-R-UIM File Structure (ANSI APPROVAL WITHDRAWN JUNE 12 2015).pdf

1、 ANSI/TIA-136-033-A-2002 APPROVED: APRIL 15, 2002 APPROVED: SEPTEMBER 18, 2013 WITHDRAWN: JUNE 12, 2015 TIA-136-033-A (Revision of TIA-136-033) April 2002TDMA Third Generation Wireless- R-UIM File Structure NOTICE TIA Engineering Standards and Publications are designed to serve the public interest t

2、hrough eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publicat

3、ions shall not in any respect preclude any member or non-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or inte

4、rnationally. Standards and Publications are adopted by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publicat

5、ion. This Standard does not purport to address all safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitation

6、s before its use. Any use of trademarks in this document are for information purposes and do not constitute an endorsement by TIA or this committee of the products or services of the company. (From Project No. ANSI/TIA-PN-136.033-A-WD, formulated under the cognizance of the TIA TR-45 Mobile (b) ther

7、e is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the

8、use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement

9、from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions,

10、which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the

11、Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whethe

12、r such reference consists of mandatory, alternate or optional elements (as defined in the TIA Procedures for American National Standards) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative

13、 Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see TIA Procedures for American National Standards Annex C.1.2.3) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other

14、 SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any

15、claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINF

16、RINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFE

17、CTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY A

18、ND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY

19、 OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. TIA/EIA-136-033-A-2013 iForeword This document references publications developed by ETSI (European Telecommunicat

20、ions Standards Institute). These referenced publications are freely available at http:/www.etsi.org TIA/EIA-136-033-A-2013 ii THIS PAGE INTENTIONALLY LEFT BLANK TIA/EIA-136-033-A-2013 iii Contents 1 Foreword. i 2 1. SCOPE. 1 3 2. CODING OF EFS FOR NAM AND OPERATIONAL PARAMETERS 1 4 2.1 EF MIN(MOBILE

21、 IDENTIFICATION NUMBER)*. 1 5 2.2 EF ACCOLC(ACCESS OVERLOAD CLASS)* 2 6 2.3 EF SID(SYSTEM ID OF HOME SYSTEM)* . 3 7 2.4 EF HOME-SOC-MCC(HOME SYSTEM OPERATOR CODE AND MOBILE COUNTRY CODE). 4 8 2.5 EF IPC(INITIAL PAGING CHANNEL)*. 5 9 2.6 EF GPI(GROUP ID)* 6 10 2.7 EF S-ESN(SIM ELECTRONIC SERIAL NUMBE

22、R)*. 7 11 2.8 EF ANSI-UI(ANSI-136 USAGE INDICATORS) 8 12 2.9 EF AMPS-UI(AMPS USAGE INDICATORS)*. 10 13 2.10 EF A-TAG(ALPHA TAGS). 12 14 2.11 EF COUNT S-P(CALL COUNT)* 14 15 2.12 EF CSL(COOPERATIVE SOC LIST) . 15 16 2.13 EF IRDB-VER (IRDB VERSION TABLE) . 17 17 2.14 EF PART-SID(PARTNER SID LIST) . 18

23、 18 2.15 EF PSID(POSITIVE/FAVORED SID LIST)* 19 19 2.16 EF NSID(NEGATIVE/FORBIDDEN SID LIST)*. 20 20 2.17 EF PART-SOC(PARTNER SOC LIST). 21 21 2.18 EF FAV-SOC(FAVORED SOC LIST) 22 22 2.19 EF FORB-SOC(FORBIDDEN SOC LIST) 23 23 2.20 EF IRDB-PARAM(IRDB PARAMETER). 24 24 2.21 EF BAND-PRIO(BAND AND SUB-B

24、AND PRIORITY ORDER) 26 25 2.22 EF NAM-PSID-RSID(NAM PSIDS/RSIDS) 29 26 2.23 EF TSTREG-PSID-RSID(TEST REGISTRATION PSIDS/RSIDS) 33 27 2.24 EF REGACC-PSID-RSID(REG ACCEPT PSIDS/RSIDS) 34 28 2.25 EF SSFC(SS FEATURE CODE TABLE). 35 29 2.26 EF TS-TIMER(TRIGGERED SCAN TIMERS) 36 30 2.27 EF REG-THRESH(REGI

25、STRATION THRESHOLD)* 37 31 2.28 EF GA-PHASE(GSM-ANSI-136 SIM PHASE ID) 38 32 2.29 EF TSAI(TELESERVICE SERVER ADDRESS INFO) 39 33 2.30 EF BHT(BAND HISTORY TABLE) . 41 34 2.31 EF DHT(DCCH HISTORY TABLE) . 43 35 2.32 EF AURP(ADDITIONAL USER REGISTRATION PARAMETERS) 45 36 2.33 EF UGIDI(USER GROUP ID INF

26、O) 46 37 2.34 EF DNI(DIRECTORY NUMBER INFO) 47 38 2.35 EF MIPINFO(MOBILE IP ADDRESS). 49 39 2.36 EF AGCSP(APPLICATION GATEWAY CIRCUIT SWITCHED PARAMETERS) 50 40 2.37 EF APD(APPLICATION PROVISIONING DATA). 52 41 2.38 EF AGIPAD(APPLICATION GATEWAY IP ADDRESS DATA) 53 42 2.39 EF MEAMAP(MESSAGE ENCRYPTI

27、ON ALGORITHM MAP). 54 43 2.40 EF RPV(R-UIM PROTOCOL VERSION) . 55 44 2.41 EF RST(R-UIM SERVICE TABLE). 56 45 2.42 EF SDCK(SOC DE-PERSONALIZATION CONTROL KEY) 58 46 2.43 EF EPSP(EGPRS-136 PSPS) 59 47 2.44 EF TESTREG-EPSP(TEST REGISTRATION EGPRS-136 PSPS). 61 48 2.45 EF REGACC-EPSP(REG ACCEPT EGPRS-13

28、6 PSPS) 62 49 2.46 EF VTSAI(VIRTUAL TELESERVICE SERVER ADDRESS INFO). 63 50 2.47 A-KEY 64 51 2.48 SHARED SECRET DATA (SSD) 64 52 TIA/EIA-136-033-A-2013 iv 3. CHANGE HISTORY FOR TIA/EIA-136-033 . 65 1 TIA/EIA-136-033-A-2013 1 1. Scope 1 This document defines the coding of the EFs specified in the R-U

29、IM file structure in TIA/EIA-2 136-030. 3 4 2. Coding of EFs for NAM and Operational 5 Parameters 6 7 The default for the INVALIDATE and REHABILITATE access conditions for all EFs shall be 8 ADM. All quantities shown in the EF descriptions abide by the following rules unless otherwise 9 specified: 1

30、0 All unused bits of allocated parameters should be set by default to 0 11 All unused bytes in a series of values (e.g., Partner, Favored, or Forbidden SID List) should 12 be set by default to FF 13 All bytes which are RFU shall be set to 00 14 All bits which are RFU shall be set to 0 15 By default

31、the Least Significant Bit is located in the rightmost bit of the last byte of the 16 corresponding field unless otherwise specified 17 All EFs marked with an * are standardized by ETSI and are provided here for information 18 only 19 2.1 EF MIN(MOBILE IDENTIFICATION NUMBER)* 20 This file contains th

32、e Mobile Identification Number (MIN). The MIN is a 34-bit number used to 21 address the mobile station across the TIA/EIA-136 and other TIA/EIA-41 based air interfaces. 22 See TIA/EIA-136-005 for further details on MIN. 23 24 Identifier: 4F88 File Type: Transparent Mandatory File size: 5 bytes Updat

33、e Activity: Low Access Conditions: READ CHV1 UPDATE CHV2 OTA YES Bytes Description M/O Length 1 - 2 MIN2 M 2 bytes 3 - 5 MIN1 M 3 bytes 25 The MIN field is coded as follows: 26 6 most significant bits are unused 27 next 10 bits are MIN2 28 24 least significant bits are MIN1 29 Default MIN is 00 00 0

34、0 00 00 or 03 FF FF FF FF. In either case the mobile station shall 30 interpret this as MIN invalid and shall not transmit this value over the air interface. 31 TIA/EIA-136-033-A-2013 2 2.2 EF ACCOLC(ACCESS OVERLOAD CLASS)* 1 This file contains the Access Overload Class (ACCOLC). The ACCOLC is a 4-b

35、it indicator used 2 to identify which overload class field controls the access attempts by the mobile station. See 3 TIA/EIA-136-140 for further details on ACCOLC. 4 5 Identifier: 4F89 File Type: Transparent Mandatory File size: 1 bytes Update Activity: Low Access Conditions: READ CHV1 UPDATE CHV2 O

36、TA YES Bytes Description M/O Length 1 ACCOLC (possible values from 00 to 0F) M 1 byte 6 Byte 1: 7 b8 b7 b6 B5 b4 b3 b2 b1 ACCOLC 0 8 TIA/EIA-136-033-A-2013 3 2.3 EF SID(SYSTEM ID OF HOME SYSTEM)* 1 This file contains the system identity of the home system. The SID is a 15-bit number that 2 uniquely

37、identifies an TIA/EIA-136 or other TIA/EIA-41 based systems. See TIA/EIA-136-005 3 for further details on Home SID. 4 5 Identifier: 4F80 File Type: Transparent Mandatory File size: 2 bytes Update Activity: Low Access Conditions: READ CHV1 UPDATE CHV2 OTA YES Bytes Description M/O Length 1-2 System I

38、D of Home System (SID) M 2 bytes 6 Coding of the System ID of Home System field (2-byte coding) 7 8 Byte 1: 9 b8 b7 b6 B5 b4 b3 b2 b1 : : : : : : MS bit of System ID of Home System 0 10 Byte 2: 11 b8 b7 b6 B5 b4 b3 b2 b1 LS bit of System ID of Home System : : : : : : : 12 TIA/EIA-136-033-A-2013 4 2.

39、4 EF HOME-SOC-MCC(HOME SYSTEM OPERATOR CODE AND 1 MOBILE COUNTRY CODE) 2 This file contains information to identify the home system operator code and the mobile country 3 code. The SOC is a 12-bit number that uniquely identifies an TIA/EIA-136 service provider. See 4 TIA/EIA-136-020 for SOC assignme

40、nts and TIA/EIA-136-005 for further details on SOC and 5 MCC. 6 7 Identifier: 6FB0 File Type: Transparent Optional File size: 4 bytes Update Activity: Low Access Conditions: READ CHV1 UPDATE ADM OTA YES Bytes Description M/O Length 1 - 2 System Operator Code (SOC) M 2 bytes 3-4 Mobile Country Code (

41、MCC) M 2 bytes 8 Values for the SOC range from 00 01 to 0F FF 9 The 4 most significant bits of the SOC = 0 10 The MCC associated with the SOC is only applicable when the value of the SOC is within the 11 National SOC range see TIA/EIA-136-123. 12 MCC is specified as in ITU-T Recommendation E.212 13

42、The 3 decimal digits of the MCC are expressed as the corresponding decimal number (000 14 = d id jd k = 999) coded in binary bits using a normal decimal to binary conversion (0 to 15 999) 16 The 6 most significant bits of the MCC = 0 17 If this file is not present, the mobile station shall interpret

43、 the Home SOC and MCC (in 18 ANSI-136 mode) to be 00 00 19 TIA/EIA-136-033-A-2013 5 2.5 EF IPC(INITIAL PAGING CHANNEL)* 1 The Initial (First) Paging Channel contains two 11-bit first paging channels (FIRSTCHP p-pri and 2 FIRSTCHP p-sec) used to identify the channel number of the first paging channel

44、 when the 3 mobile station is “Home”. See TIA/EIA-136-140 for further details on First (Initial) Paging 4 Channel. 5 6 Identifier: 4F82 File Type: Transparent Mandatory File size: 2-4 bytes Update Activity: Low Access Conditions: READ CHV1 UPDATE CHV2 OTA YES Bytes Description M/O Length 1 - 2 FIRST

45、CHPpri (Initial Paging Channel) M 2 bytes 3 4 FIRSTCHPp-sec O 2 bytes 7 In the absence of the FIRSTCHPp-sec, the mobile station shall default to 708 (decimal) if the 8 primary channel = 333 (decimal) or 737 (decimal) if the primary channel = 334 (decimal) 9 A file size of 4 bytes may not be backward

46、s compatible with some GSM/AMPS dual-mode 10 mobile equipment 11 TIA/EIA-136-033-A-2013 6 2.6 EF GPI(GROUP ID)* 1 This file defines a subset of the most significant bits of the system identification (SID) that is 2 used to identify a group of cellular systems for local control purposes. If the local

47、 control option 3 is enabled within the mobile station (see Section 2.9) and the bits of the home system 4 identification that comprise the group identification match the corresponding bits of the SID read 5 by the mobile station over the air, then the Local Control status must be enabled. Otherwise

48、 the 6 Local Control status must be disabled. Refer to TIA/EIA-136-005 and EIA/TIA-553 for 7 additional details. 8 9 Identifier: 4F81 File Type: Transparent Mandatory File size: 1 byte Update Activity: Low Access Conditions: READ CHV1 UPDATE CHV2 OTA YES Bytes Description M/O Length 1 Group ID M 1

49、byte 10 Group ID default for North America = 0A 11 TIA/EIA-136-033-A-2013 7 2.7 EF S-ESN(SIM ELECTRONIC SERIAL NUMBER)* 1 This file stores a 32-bit electronic serial number (ESN) that is unique to the R-UIM. The S-ESN 2 may be used in conjunction with the A-key and CAVE algorithm for authentication. See the 3 ANSI-136 Usage Indicator file for details on the ESN usage indicator which specifies to the 4 mobile equipment how the S-ESN should be used. See TIA/EIA-136-005 for details on the ESN 5