TIA-136-230-2000 TDMA- Third Generation Wireless-Minimum Performance Specifications for US-1 Voice Coder (ANSI APPROVED WITHDRAWN JUNE 12 2015).pdf

1、 ANSI/TIA-136-230-2000 APPROVED: MARCH 31, 2000 REAFFIRMED: OCTOBER 20, 2004 REAFFIRMED: AUGUST 14, 2013 WITHDRAWN: JUNE 12, 2015 TIA-136-230 March 2000TDMA Third Generation Wireless- Minimum Performance Specifications for US-1 Voice Coder NOTICE TIA Engineering Standards and Publications are design

2、ed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existen

3、ce of such Standards and Publications shall not in any respect preclude any member or non-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA mem

4、bers, either domestically or internationally. Standards and Publications are adopted by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties

5、adopting the Standard or Publication. This Standard does not purport to address all safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the appli

6、cability of regulatory limitations before its use. Any use of trademarks in this document are for information purposes and do not constitute an endorsement by TIA or this committee of the products or services of the company. (From Project No. ANSI/TIA-PN-136.230-RF2-WD, formulated under the cognizan

7、ce of the TIA TR-45 Mobile (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of content

8、s of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and cal

9、led to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of

10、any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have

11、been complied with as respects the Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, r

12、ecommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Procedures for American National Standards) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assur

13、ance relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see TIA Procedures for American National Standards Annex C.1.2.3) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the r

14、ecords or publications of the other SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate pr

15、oducts, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE,

16、 ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGUL

17、ATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN,

18、 INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE,

19、 EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. TIA/EIA-136-230iContentsFOREWORD . II1. INTRODUCTION . 11.1 S COPE 21.2 T ERMS

20、 41.3 M ODEL FOR S UBJECTIVE T EST OF THE S PEECH C ODEC 62. CODEC MINIMUM STA NDARDS 92.1 S TRICT O BJECTIVE P ERFORMANCE R EQUIREMENTS 92.2 S UBJECTIVE P ERFORMANCE R EQUIREMENTS . 102.2.1 Definition . 102.2.2 Description of Procedure . 102.2.3 Minimum Standard . 192.2.4 Expected Results for Refer

21、ence Conditions . 213. STANDARD TEST CON DITIONS . 233.1 S TANDARD E QUIPMENT . 233.1.1 Basic Equipment 233.1.2 Subjective Test Equipment 253.2 S TANDARD E NVIRONMENTAL T EST C ONDITIONS 263.3 S TANDARD S OFTWARE T EST T OOLS . 263.3.1 Analysis of Subjective Performance Test Results 273.3.2 Randomiz

22、ation routine for subjective test . 283.4 S TANDARD S PEECH F ILES 333.4.1 Source Material . 333.4.2 File naming conventions . 343.4.3 Assignment of source files to test conditions . 343.4.4 Calibration file . 363.4.5 Software tools for generating speech files . 374. CNG MINIMUM STAND ARDS . 384.1 D

23、 ELAY R EQUIREMENTS . 384.2 P ERFORMANCE R EQUIREMENTS . 384.2.1 Test Cases 384.2.2 Test Procedure . 425. CONTENTS OF SOFTW ARE DISTRIBUTION . 476. TIA/EIA-136-430 U S1 ENCODER OUTPUT FORMAT . 537. CHANGE HISTORY 568. REFERENCES 57TIA/EIA-136-230iiForewordThis document references publications develo

24、ped by ETSI (EuropeanTelecommunications Standards Institute). These referencedpublications are freely available at http:/www.etsi.org .TIA/EIA-136-23011. Introduction1This standard details definitions, methods of measurement, and2minimum performance characteristics of the 12.2 kbps US1 Enhanced3Full

25、-Rate speech codec (TIA/EIA-136-430). This standard only4applies to Base Stations that employ non-bit-exact implementations of5TIA/EIA-136-430 compatible codec. It does not apply to Mobile6Stations (MS), since only bit-exact implementations of the enhanced7full-rate codec are permitted at MS.8For Pu

26、rposes of this standard, shall and shall not identify9requirements to be followed strictly to conform to the standard, and10from which no deviation is permitted. Should and should not indicate11that one of several possibilities is recommended as particularly12suitable, without mentioning or excludin

27、g others; that a certain course13of action is preferred, but not necessarily required; or (in the negative14form) that a certain possibility or course of action is discouraged, but15not prohibited. May and may not indicate a course of action16permissible within the limits of this standard. Can and c

28、annot are17used for statements of possibility and capability, whether material,18physical, or causal.19This standard is comprised of two parts. The first part, as detailed in202 and 3, covers enhanced full-rate speech encoding and decoding21operations in Continuous Transmission (CTX) or Discontinuou

29、s22Transmission High (DTX-high) modes of operation. The second part23as detailed in 4 covers Comfort Noise Generation (CNG) operation of24the enhanced full-rate speech decoder during Discontinuous25Transmission Low (DTX-low) mode of operation.26The first part of this standard (2 and 3), which covers

30、 normal 12.227kbps enhanced full-rate speech encoding and decoding operations, is28largely derived from TIA/EIA-635 Ref. 19, which specifies the29procedures to be employed to test implementations of TIA/EIA-62730Ref. 20 compatible full rate speech codecs, and to verify that they31meet recommended mi

31、nimum performance standards.32This standard consists of this document and a software distribution33containing speech source material, calibration source material and34software data analysis tools. The software distribution also contains35specifically for CNG reference comfort noise data files, truth

32、 mark36files, encoder serial output data files, and a set of C source files for a37software tool to produce and to evaluate the performance metrics. A38detailed description of contents and formats of the software39distribution is given in 5 of this document. The software distribution40shall accompan

33、y this standard, for example, on the same CD-ROM,41from the same internet site.42Compatibility, as used in connection with this standard and TIA/EIA-43136-430, is understood to mean any TDMA MS is able to place and44TIA/EIA-136-2302receive calls in any TDMA cellular system. Conversely, all TDMA1cell

34、ular systems are able to place and receive calls with any TDMA2MS. To assure compatibility, it is essential that speech processing3parameters be specified.4The enhanced full rate speech codec is intended to be used in both5MSs and at compatible Base Stations in the Cellular Service. This6standard is

35、 meant to define the recommended minimum performance7requirements of TIA/EIA-136-430 compatible non-bit-exact8implementations of the enhanced full-rate codecs at the Base Station9end. It does not apply to bit-exact implementations of the enhanced10full-rate codec. Since bit-exact implementation is m

36、andatory at the MS11end, this standard does not apply to MSs. By Base Station end, we12also include implementations in which codecs are placed at a Mobile13Switching Center or elsewhere at the fixed end of the cellular system.14Although the basic purpose of cellular telecommunications has been15voic

37、e communication, evolving usage (for example, data) may allow16the omission of some of the features specified herein provided that17system compatibility is not compromised.181.1 Scope19This document specifies the test procedures to ensure that non-bit-20exact implementations of TIA/EIA-136-430 compa

38、tible full-rate21speech codecs operating in CTX or DTX-high meet recommended22minimum performance requirements. This document also defines the23minimum performance specification for non-bit-exact TIA/EIA-136-24430 CNG implementation operating under channel error free25conditions. The speech codec is

39、 used to digitally encode the speech26signal for transmission at a data rate of 12200 bps or 244 bits every 2027ms.28The TIA/EIA-136-430 standard includes a bit-exact specification of29the speech codec using a fixed point ANSI C code Ref. 14,15.30Twenty-eight sets of test sequences are provided alon

40、g with this31standard Ref. 17. These test sequences are designed to provide for32maximum coverage of the fixed point ANSI C code. There are33separate test sequences for testing the encoder and for testing the34decoder portions of the TIA/EIA-136-430 standard speech codec. A35bit-exact implementation

41、 of this standard on a fixed point device36would have to “pass” all of the twenty-eight test sequences for the37encoder and the twenty-eight test sequences for the decoder in order38to comply with the TIA/EIA-136-430 standard.39At the Base Station end, non-bit-exact implementations of the40TIA/EIA-1

42、36-430 standard are permitted. For such implementations,41it may not be possible to generate test vectors that can guarantee42compatibility with the standard by using them as input to the speech43encoder or decoder and by examining their output for exact replication44of the corresponding reference v

43、ector. This document describes a45TIA/EIA-136-2303series of tests which are used to test conformance to the specification.1These tests do not necessarily ensure that the codec operates2satisfactorily under all possible input signals and it is still a3requirement of the manufacturer to ensure that hi

44、s implementation4operates in a consistent manner. The purpose of these tests is to test for5minimum performance levels. The manufacturer should attempt to6provide the highest performance possible.7The testing of any non-bit-exact implementation of the codec8operating in CTX or DTX-high is based upon

45、 two classes of9procedures:10Objective tests , which are based upon bench measurements of11the speech codec function.12Subjective tests , which are based upon listening tests to judge 13overall speech quality.14Minimum performance specification for CNG is based upon objective15tests. These tests are

46、 defined by the test database, a method for16generating individual test data files, the test requirements on candidate17CNGs, a method to collect performance metrics, and the means to test18those metrics so as to validate conformance to the specification.19The main purpose of the testing is to ensur

47、e adequate performance20between any Base Stations encoder and any mobile stations decoder21and vice-versa. Since the MS is restricted to have bit-exact22implementations of the TIA/EIA-136-430 standard only, it suffices to23demonstrate that minimum performance standards have been met24when inter-oper

48、ating with any bit-exact implementation. For this25purpose, the fixed point ANSI C code provided as a part of the26TIA/EIA-136-430 standard can be treated as the reference or master27codec Ref. 14,15.28The restriction that MSs can only have bit-exact implementations of29the TIA/EIA-136-430 standard

49、is the primary reason that allows this30standard to ensure minimum performance standards between any31pairing of Base Stations and MSs; otherwise, this could only be32guaranteed by testing all combinations of encoder/decoder pairings in33both Base Stations and MSs. With the number of equipment34manufacturers expected to supply equipment this could become a35prohibitive task.36By convention in this document, the Courier font is used to indicate37C language and other software constructs, such as file and variable38names. The diac