TIA-136-310-A-1-2000 TDMA- Third Generation Wireless- Radio Link Protocol- 1 Addendum 1 (Addendum to TIA-136-310-A ANSI APPROVAL WITHDRAWN JUNE 12 2015).pdf

1、 ANSI/TIA-136-310-A-1-2000 APPROVED: MARCH 31, 2000 REAFFIRMED: OCTOBER 20, 2004 REAFFIRMED: AUGUST 14, 2013 WITHDRAWN: JUNE 12, 2015 TIA-136-310-A-1 (Addendum to TIA-136-310-A) March 2000TDMA Third Generation Wireless- Radio Link Protocol- 1, Addendum 1 NOTICE TIA Engineering Standards and Publicat

2、ions are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular ne

3、ed. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use

4、 by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whate

5、ver to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to dete

6、rmine the applicability of regulatory limitations before its use. Any use of trademarks in this document are for information purposes and do not constitute an endorsement by TIA or this committee of the products or services of the company. (From Project No. ANSI/TIA-PN-136.310-A-1-RF2-WD, formulated

7、 under the cognizance of the TIA TR-45 Mobile (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or

8、practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications

9、are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party

10、 to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided

11、in the Manual have been complied with as respects the Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standar

12、d, specification, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Procedures for American National Standards) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR

13、or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see TIA Procedures for American National Standards Annex C.1.2.3) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to cla

14、ims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or other

15、wise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICU

16、LAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STA

17、TUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENT

18、S CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIAB

19、ILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. SHEET CONTDON1999,NextGeneration Consulting.Licensed toTIA.

20、Allother rightsreserved.D SIZEDWG NOSCALEREVDWNCHKDAPVDLIST OFREFERENCE DOCUMENTSITEMDWG NOTITLEREVDESCRIPTIONDATEREVA B C D123456ADSNextGenerationCalgaryAlberta T2M4N3Site19Box84SS 1DR/COAPVDRadio LinkProtocol1TransmissionController0A0136-310-10121st release:IS-130.2nd release:IS-130-A.3rdrelease:T

21、IA/EIA-136-310.01Mar 9504Jul 9703Sep 99CM1AttachedandDisconnectedConnect_ReqInvertP_TxPDUT_Tx=SABMCM2LinkInitiatedUAPDU_RxFalseTrueInitializelinkvariablesCM4ConnectedProcessshort feedbackProcesslong feedbackUpdate receiverstateUpdate receiverstateSend_B_Once= TrueConnect_ReqSABMPDU_RxF_Tx= P_RxPDUT_

22、Tx= UAInitializelinkvariablesCM3LinkAcceptedSPDU_RxLSPDU_RxIPDU_RxPIPDU_RxProcessshort feedbackProcesslong feedbackUpdate receiverstateUpdate receiverstateDMPDU_RxTrueFalseError_IndErrorPDUT_Tx= nullXID_Tx= nullSABMPDU_RxUAPDU_RxPUIPDU_RxUIPDU_RxData_IndBSDU, QPDUT_Tx= IDLEL3SEPSEPSEPDBKL3SEPSEPSEPL

23、3SEPSEPSEPSEPSEPSEPSEPSEPSEPSPDU_RxLSPDU_RxIPDU_RxPIPDU_RxUAPDU_RxSEPDisc_ReqL3PDUT_Tx= DISCXID_Tx= nullInvertP_TxCM2,CM3,CM4CM5DisconnectRequestSEPDISCPDU_RxF_Tx=P_RxPDUT_Tx= UAXID_Tx= nullCntn_mode= FalseCM6DisconnectIndicationSEPUAPDU_RxSEPIDLEPDU_RxF_Rx= P_TxFalseTrueCntn_ModeFalseTruePDUT_Tx= I

24、DLEF_Tx= F_RxPDUT_Tx=nullSEPUAPDU_RxFalseTrueSEPDMPDU_RxFalseTruePDUT_Tx= IDLEF_Tx= F_RxPDUT_Tx=nullSEPDISCPDU_RxF_Tx=P_RxPDUT_Tx= UACntn_Mode= TrueDisc_IndL3Figure 101: ConnectionManagerDisc_ReqL3Disc_ConL3SEPDISCPDU_RxPDUT_Tx= UADisc_ConL3T1T1 T1T1P_Rx= Pfrom receivedPDUF_Rx= Ffrom receivedPDUP_Rx

25、= Pfrom receivedPDUF_Rx=P_TxF_Rx= P_TxF_Rx= Ffrom receivedPDUF_Rx= Ffrom receivedPDUP_Rx= Pfrom receivedPDUF_Rx= Ffrom receivedPDUF_Tx= F_RxF_Tx= P_RxP_Rx= Pfrom receivedPDUF_Rx= P_TxF_Rx= Ffrom receivedPDUF_Rx= P_TxF_Rx= Ffrom receivedPDUContinue T1Continue T1Continue T1Continue T1Clear_IndStartCM0

26、DetachedandDisconnectedAttach_ReqL3SEPDISCPDU_RxSEPSABMPDU_RxT1Error_IndLMCM7LockoutP_Rx= Pfrom receivedPDUReset_ReqFCS_LenLMP_Tx= 0PDUT_Tx= nullXID_Tx= nullL3Attach_ConReset_IndL3Initiate XIDF_Tx= P_RxDisc_IndL3Stop alltimersStop alltimersPDUT_Tx= nullXID_Tx= nullClear_IndCMPPDUT_Tx= DMBSDU_Rx= BSD

27、Ufromreceived PDUT1indicatesthat the state hasan associated timer,T1:Upon entering the statevia a path thatdoesnot include a timer-continue task, start the timerfromitsdefault value.Upon entering the statevia a path thatdoesinclude a timer-continue task, continue the timerfrom itsstopped value.Onlea

28、ving the state, stop the timer.XID_Rx= XIDDUfromreceived PDUXID_Rx= XIDDUfromreceived PDUClear_IndPDUT_Tx= nullXID_Tx= nullDecryptUnacked BSDUInitializeattachvariablesNS_Rx=NUfromreceived PDUDetach_ReqL3 L3Detach_ConInitializeattachvariablesInitializeattachvariablesKey_Tx= 1Key_Rx= 0Key_Tx= 0Key_Rx=

29、 1ReplyXIDSABMPDU_RxSEPError=DetachedError =ContentionError_IndErrorL3Clear_IndClear_IndQ =Qfromreceived PDUQ = 0EXPCMPEXPCMPEXPCMPEXPCMPEXPConfirmXIDBSDU=BSDU_RxCM2, CM3, CM5,CM6QSHEET CONTDON1999,NextGeneration Consulting.Licensed toTIA.Allother rightsreserved.D SIZEDWG NOSCALEREVDWNCHKDAPVDLIST O

30、FREFERENCE DOCUMENTSITEMDWG NOTITLEREVDR/COAPVDDESCRIPTIONDATEREVA B C D123456ADSNextGenerationCalgaryAlberta T2M4N3Site19Box84SS 10A0Radio LinkProtocol1TransmissionController23136-310-101st release:IS-130.2nd release:IS-130-A.3rdrelease:TIA/EIA-136-310.01Mar 9504Jul 9703Sep 99Poll_Stat_Ind NElsenul

31、lR=nullR=must_sendN= 0FalseTrueR=can_sendnullPoll_Snd_IndnullPDUT_TxPoll_Snd_ResPDUT_Tx= nullPoll_Stat_Ind NR=must_sendN= 0FalseTrueR=can_sendPoll_Stat_ResRPoll_Snd_ResPoll_Stat_Ind NTrueN= 0Send_LS= FalseSend_S= FalseTrueR=must_sendSent_AllFind retransmit PDUTrueNS_Tx=nullTrue(NS_Max NR_PS)mod 1280

32、TrueFalseMax_Len =27 2 FCS_LenQualifiedUnqualifiedR=must_sendMax_Len =27 3 FCS_LenRetrieveand EncryptBSDUL_BSDU32, layer3 shallnot issue aserviceprimitivewithk32.Truek_Rx0TrueFalseElseCMPC-ERROR_IndARQError_IndP0_Tx00011011INIT_ReqP1_Tx,P2_TxEXPINIT_ReqP1_Tx,P2_TxARQConnect_IndXID_RxLX=length of XID

33、_RxLX 0TrueFalseGID_Rx=GIDfrom next XIDDU0GID_RxLX=LXGL_Rx 1GL_Rx =GLfrom next XIDDUElseXID= nextGLoctetsof XID_RxV_Rx= Vfrom XIDElse0V_Rxk_Rx= kfrom XIDP0_Rx=P0from XIDP1_Rx= P1from XIDP2_Rx= P2from XIDPIM_Rx= PIMfrom XIDPIM_Rxbit801k_Rx= 64PIM_Rxbit701P0_Rx= 00PIM_Rxbit601P1_Rx=512PIM_Rxbit501P2_R

34、x= 6FalseTruek_Rxk_TxP0_Rx00011011P0_TxP0_Tx11 or1001 or1100or10P0_Tx11Else00or01FalseTrueP1_RxP1_TxFalseTrueP2_RxP2_TxINIT_ReqP1_Rx,P2_RxEXPP0_Rx00011011INIT_ReqP1_Rx,P2_RxEXPINIT_ReqP1_Rx,P2_RxCMPCMPCMPCMPL3Config_ReqFCS_Len, kL3Reset_ReqFCS_LenARQConfig_Conindicatesa manufacturersettingFigure 101

35、: Layer ManagerFigure104:ConstructXID_TxConstructXID_TxFieldValueGIDGLVPIMkP0P1P20XID_Txlength 10Set bitsforincluded parametersk_Tx(Maybe omitted if64)P0_Tx(Maybe omitted if00)P1_Tx(Maybeomitted if512)P2_Tx(Maybe omitted if6)XID_Tx=Connect_ConP0_Rx, P1_Rx,P2_RxL3Connect_IndP0_Tx,P1_Tx,P2_TxL3P1_Rx51

36、2TrueFalseTrueTrueFalseFalse6P2_Rx250EXPINIT_ReqP1_Tx,P2_TxCMPCMPEXPCMPINIT_ReqP1_Rx,P2_RxEXPINIT_Req0,0CMPEXP1 k_Rx64ReadXIDDUFigure 102: ReadXIDDURead XIDDURead XIDDUReadXIDParametersFigure103:ReadXIDParametersRead XIDParametersRead XIDParametersNotes1. Allprocedure variablesare visibleto the call

37、ing process.Allprocessvariablesarevisible to the called procedure.INIT_Req0,0INIT_Req0,0INIT_Req0,0INIT_Req0,0INIT_Req0,0INIT_Req0,0INIT_Req0,0ARQXID_Reqk_Tx= kP2_Tx=P2P1_Tx=P1P2_Tx=P2P1_Tx=P1P0_Tx=P0k_Tx= kXID_ConXID_TxARQConstructXID_TxP2_Tx=P2P1_Tx=P1P0_Tx=P0k_Tx= kConnect_Conk_RxARQFalseFalseFal

38、seTHE TELECOMMUNICATIONS INDUSTRY ASSOCIATION TIA represents the global information and communications technology (ICT) industry through standards development, advocacy, tradeshows, business opportunities, market intelligence and world-wide environmental regulatory analysis. Since 1924, TIA has been

39、 enhancing the business environment for broadband, wireless, information technology, cable, satellite, and unified communications. TIA members products and services empower communications in every industry and market, including healthcare, education, security, public safety, transportation, government, the utilities. TIA is accredited by the American National Standards Institute (ANSI).