TIA-136-932-2000 TDMA- Third Generation Wireless- Packet Data Service- Stage 2 Description (ANSI APPROVAL WITHDRAWN JUNE 12 2015).pdf

1、 ANSI/TIA-136-932-2000 APPROVED: MARCH 31, 2000 REAFFIRMED: OCTOBER 20, 2004 REAFFIRMED: AUGUST 14, 2013 WITHDRAWN: JUNE 12, 2015 TIA-136-932 March 2000TDMA Third Generation Wireless- Packet Data Service- Stage 2 Description NOTICE TIA Engineering Standards and Publications are designed to serve the

2、 public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Stan

3、dards and Publications shall not in any respect preclude any member or non-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either do

4、mestically or internationally. Standards and Publications are adopted by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the St

5、andard or Publication. This Standard does not purport to address all safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of reg

6、ulatory limitations before its use. Any use of trademarks in this document are for information purposes and do not constitute an endorsement by TIA or this committee of the products or services of the company. (From Project No. ANSI/TIA-PN-136.932-RF2-WD, formulated under the cognizance of the TIA T

7、R-45 Mobile (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Docum

8、ent may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs att

9、ention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing t

10、erms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied w

11、ith as respects the Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation o

12、r otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Procedures for American National Standards) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating t

13、o any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see TIA Procedures for American National Standards Annex C.1.2.3) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publi

14、cations of the other SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs

15、 or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTAB

16、ILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE S

17、AFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITH

18、OUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISE

19、D OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. TIA/EIA-136-932iForeword This foreword is not part of TIA/EIA-136-932This informative part of

20、 TIA/EIA-136 contains stage 2 descriptions forthe GPRS-136 packet-data service. It describes the main trafficscenarios and the message flows between different network elements.TIA-136-932 was developed by TR-45.3.2, the Data Services WorkingGroup of TR-45.3, the TIA TDMA Wireless Standards Subcommit

21、tee.This document references publications developed by ETSI (EuropeanTelecommunications Standards Institute). These referencedpublications are freely available at http:/www.etsi.org .TIA welcomes suggestions for improvement of this standard. Pleasesend suggestions to the following address:Telecommun

22、ications Industry Association2500 Wilson Boulevard Suite 300Arlington VA 22201-3836This part contains two appendices: Appendix A contains no requirements: it describes the handling ofTLLI Appendix B contains no requirements: it gives an example of aterminating packet data transferTIA/EIA-136-932iiTH

23、IS PAGE INTENTIONALLY LEFT BLANKTIA/EIA-136-932iiiContents1. Network Reference Model. 11.1 Interfaces . 11.2 New Network Elements . 21.3 Modified Network Elements 31.4 Unchanged Network Elements . 31.5 Association Between SGSN and TIA/EIA-41 Gateway/ Serving-MSC/VLR 42. Stage 2 Descriptions. 92.1 GP

24、RS Attach and TIA/EIA-136 Registration . 92.2 Intra-SGSN Routing Area Re-Selection - Standby 132.3 Inter-SGSN Routing Area Re-Selection - S tandby 142.4 Intra-SGSN Routing Area Reselection - Ready 182.4.1 New RAI (LAI is unchanged) Within the Current Serving SGSN 182.4.2 Same RAI Within the Current

25、Ser ving SGSN 192.5 Inter SGSN Routing Area Re-Selection - Ready . 202.6 Incoming Circuit-Switched Call - Standby State 202.6.1 Gateway MSC is Serving MSC - Paging Prior to Call Extension . 202.6.2 Gateway MSC is Serving MSC - Call Extension Prior to Paging . 232.6.3 Gateway MSC is not Serving MSC -

26、 Paging Prior to Call Extension . 262.6.4 Gateway MSC is not Serving MSC - Call Extension Prior to Paging . 292.6.5 Gateway MSC is Serving MSC - Layer 3 Page Delivered . 332.6.6 Gateway MSC is Serving MSC - Layer 3 Page Rejected 352.6.7 Gateway MSC is Serving MSC - Concurrent Page and Call Extension

27、 372.6.8 Gateway MSC is not Serving MSC - Concurrent Page and Call Extension 382.7 Originating Circ uit-Switched Call with MS in Standby State . 432.7.1 Gateway MSC is Serving MSC 432.7.2 Gateway MSC is not Serving MSC 452.8 Incoming Circuit Call with MS in Ready S tate 462.9 Originating Circuit-Swi

28、tched Call with MS in Ready State 462.10 Incoming Teleservice with MS in Standby State 462.10.1 Incoming Teleservice with MS in S tandby State Without Authentication . 472.10.2 Incoming Teleservice with MS in Standby State with Authentication (SPACH) . 492.11 Originating Teleservice with MS in Stand

29、by State . 512.11.1 Outgoing Teleservice with MS in Standby State without Authentication 512.11.2 Outgoing Teleservice with MS in Standby State with Authentication (SPACH) . 532.12 Incoming Teles ervice with MS in Ready State . 542.13 Originating Teleservice with MS in Ready State 542.14 Detach with

30、 MS in Standby State . 542.15 Detach and Deregistration with MS in Ready State 552.15.1 MS-Initiated Detach/De-registration Procedure . 56TIA/EIA-136-932iv2.15.2 SGSN-Initiated Detach Procedure 572.15.3 MS-Initiated De-registration Procedure 582.16 Call Disconnect During Circuit Call . 592.16.1 Call

31、 Disconnect - MS in Same SGSN - Gateway MSC is Serving MSC 602.16.2 Call Disconnect - MS in New SGSN - Gateway MSC is Serving MSC . 622.16.3 Call Disconnect - MS in Same SGSN - Gateway MSC is not Serving MSC 662.16.4 Call Disconnect - MS in New SGSN - Gateway MSC is not Serving MSC . 682.16.5 Call D

32、isconnect RAI is Unchanged - Gateway MSC is Serving MSC 722.16.6 Call Disconnect RAI is Unchanged - Gateway MSC is not Serving MSC 742.17 Power Down . 762.17.1 Power Down in STANDBY State on a PCCH 762.17.2 Power Down in READY State on a PCCH . 772.17.3 Power Down During a Circuit-Switched Call . 77

33、2.17.4 Power Down While on a DCCH . 782.18 MS Originated Packet Transaction . 782.18.1 Uplink Transaction in STANDBY - No PTCH Assignment . 782.18.2 Uplink Transaction in REA DY - No PTCH Assignment 792.18.3 Uplink Transaction in STANDBY - 30 kHz PTCH Assignment 792.18.4 Uplink Transaction in STANDB

34、Y - 200 kHz PTCH Assignment . 802.18.5 Uplink Transaction in STANDBY - 1.6 MHz PTCH Assignment 802.18.6 Uplink Transaction in READY - 30 kHz PTCH Assignment . 802.18.7 Uplink Transaction in READY - 200 kHz PTCH Assignment . 802.18.8 Uplink Transaction in READY - 1.6 MHz PTCH Assignment 812.19 Termin

35、ating Packet Data Transaction 812.19.1 Downlink Transaction in STANDBY No PTCH Assignment 812.19.2 Downlink Transaction in READY No PTCH Assignment . 832.19.3 Downlink Transaction in STANDBY 30 kHz PTCH Assignment 842.19.4 Downlink Transaction in STANDBY 200kHz PTCH Assignment 852.19.5 Downlink Tran

36、saction in STANDBY 1.6MHz PTCH Assignment . 852.19.6 Downlink Transaction in READY 30 kHz PTCH Assignment 862.19.7 Do wnlink Transaction in READY 200 kHz PTCH Assignment . 872.19.8 Downlink Transaction in READY 1.6 MHz PTCH Assignment 872.20 Generic Message Tunneling . 872.20.1 Do wnlink Generic Mes

37、sage Tunneling . 872.20.2 Uplink Generic Message Tunneling . 892.21 Authentication Scenarios 892.21.1 AC Initiated Unique Challenge, SSD is not Share d 892.21.2 SSD Update, SSD is not Shared . 923. References 95APPENDICES:TIA/EIA-136-932vAppendix A 89Appendix B 93TIA/EIA-136-932viFiguresFigure 1 Net

38、work Reference Model 1Figure 2 Allowed scopes of the LAI 6Figure 3 Allowed scopes of the LAI 7Figure 4 Not allowed scopes of the LAI 8Figure 5 GPRS Attach and TIA/EIA-136 Registration 11Figure 6 Intra-SGSN Re-Selection - Standby 14Figure 7 Inter-SGSN Re-Selection - Standby 16Figure 8 Intra -SGSN Re-

39、Selection Ready (Same RAI) . 19Figure 9 Incoming Call Standby (Gateway is Serving, Page Prior to Call Ext.) 21Figure 10 Incoming Call Standby (Gateway is Serving, Call Ext. Prior to Page) 24Figure 11 Incoming Call Standby (Gateway is not Serving, Page Prior to Call Ext.) 27Figure 12 Incoming Call St

40、andby (Gateway is not Serving, Call Ext. Prior to Page) 30Figure 13 Layer 3 Page Delivered 33Figure 14 Layer 3 Page Rejected 35Figure 15 Concurrent Page and Call Extension (Gateway is Serving) . 37Figure 16 Concurrent Page and Call Extension (Gateway is not Serving) . 40Figure 17 Originating Circuit

41、 Call Standby (Gateway is Serving) 43Figure 18 Originating Circuit Call Standby (Gateway is not S erving) 45Figure 19 Incoming Teleservice Standby (Without Authentication) . 47Figure 20 Incoming Teleservice Standby (With Authentication) 49Figure 21 Outgoing T eleservice Standby (Without Authenticati

42、on) . 51Figure 22 Outgoing Teleservice Standby (With Authentication) 53Figure 23 Detach Standby . 54Figure 24 MS Initiate d Detach . 56Figure 25 SGSN Initiated Detach . 57Figure 26 MS Initiated De-registration . 58Figure 27 Call Disconnect RAI has Changed (Same SGSN, Gateway is Serving) 60Figure 28

43、Call Disconnect RAI has Changed (New SGSN, Gateway is Serving) 62Figure 29 Call Disconnect RAI has Changed (Same SGSN, Gateway is not Serving) 66Figure 30 Call Disconnect RAI has Changed (New SGSN, Gateway is not Serving) 69Figure 31 Call Disconnect RAI is Unchanged (Gateway is Serving) 72Figure 32

44、Call Disconnect RAI is Unchanged (Ga teway is not Serving) 74Figure 33 Power Down - Standby . 76Figure 34 Power Down During a Circuit Call 77Figure 35 Uplink Transaction in STANDBY - No PTCH Assignmen t 78Figure 36 Uplink Transaction in STANDBY - 30 kHz PTCH Assignment . 79Figure 37 Downlink Transac

45、tion in STANDBY No PTCH Assignment 81TIA/EIA-136-932viiFigure 38 Downlink Transact ion in READY No PTCH Assignment . 83Figure 39 Downlink Transaction in STANDBY 30kHz PTCH Assignment 84Figure 40 Downlink Transaction in READY 30 kHz PTCH Assignment 86Figure 41 Generic Message Tunneling - Downlink 88F

46、igure 42 Generic Message Tunneling - Uplink . 89Figure 43 AC Initiated Unique Challenge SSD Not Shared . 90Figure 44 SSD Update SSD is not Shared . 92TIA/EIA-136-932viiiRevision HistoryDate DescriptionTIA/EIA-136-932ixTHIS PAGE INTENTIONALLY LEFT BLANKTIA/EIA-136-93211. Network Reference Model1GPRS

47、integration with TIA/EIA-136 is logically accomplished through the addition of2the network node, the TIA/EIA-41 G/S-MSC/VLR. The GPRS network structure is3assumed to be as currently defined in GSM standards. Only one GPRS node from the4GPRS complex is visible to the TIA/EIA-41 network - the SGSN. No

48、te that the term5TIA/EIA-41 is used to describe the network signaling supported within the TIA/EIA-6136 infrastructure.7Updates to TIA/EIA-41 identified in this standard are under review by TR 45.2. Updates8to GSM specifications identified in this standard are under review by ETSI. This stage 29desc

49、ription will be updated to use the adopted versions for TIA/EIA-41 and GSM10specifications.11Figure 1 Network Reference Model12GfGiGnGbC-DGpGsSignaling and Data Transfer InterfaceSignaling InterfaceTE M-ES BS TEPDNR UmGrGPRSHLROther PLMNSGSNGGSNTIA/EIA-41HLR/ACGGSNEIRSGSNGnTIA/EIA-41ServingMSC/VLRTIA/EIA-41Gateway-MSC/VLRETIA/EIA-41MC/OTAFNTIA/EIA-41SMEMQC-DGc131.1 Interfaces14C: TIA/EIA-41 signaling interface between the TIA/EIA-41