1、 TIA STANDARD Signaling Link Access Control (LAC) Standard for cdma2000Spread Spectrum Systems Addendum 1 TIA-2000.4-D-1E January 2006 TELECOMMUNICATIONS INDUSTRY ASSOCIATION The Telecommunications Industry Association represents the communications sector of Copyright Telecommunications Industry Ass
2、ociation Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, fa
3、cilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of TIA from m
4、anufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accordance with
5、 the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems associated
6、 with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Standards Proposal No. 3-4696-RV4-AD1E, formulated un
7、der the cognizance of the TIA TR-45.5 Subcommittee on Spread Spectrum Digital Technology). Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION Standards and Technology Department 2500 Wilson Boulevard Arlington, VA 22201 U.S.A. PRICE: Please refer to current Catalog of TIA TELECOMMUNICATIONS INDUST
8、RY ASSOCIATION STANDARDS AND ENGINEERING PUBLICATIONS or call Global Engineering Documents, USA and Canada (1-800-854-7179) International (303-397-7956) or search online at http:/www.tiaonline.org/standards/search_n_order.cfm All rights reserved Printed in U.S.A. Copyright Telecommunications Industr
9、y Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-NOTICE OF COPYRIGHT This document is copyrighted by the TIA. Reproduction of these documents either in hard copy or soft copy (including posting on the web) is prohi
10、bited without copyright permission. For copyright permission to reproduce portions of this document, please contact TIA Standards Department or go to the TIA website (www.tiaonline.org) for details on how to request permission. Details are located at: http:/www.tiaonline.org/about/faqDetail.cfm?id=1
11、8 OR Telecommunications Industry Association Standards (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. Th
12、e use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent appl
13、ications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither b
14、e a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or
15、provided in the Manual have been complied with as respects the Document or its contents. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the conte
16、nts of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NON-INFRINGEMENT OF ANY THIRD PARTYS INTE
17、LLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT
18、 OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENT
19、AL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NE
20、GATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted witho
21、ut license from IHS-,-,-TIA-2000.4-D-1 CONTENTS i FOREWORD.xiv 1 NOTES xv 2 REFERENCESxvi 3 1 DEFINITIONS AND CONCEPTUAL MODEL. 1-1 4 1.1 Terms and Numeric Information. 1-1 5 1.1.1 Terms . 1-1 6 1.1.2 Numeric Information. 1-7 7 1.2 Conceptual Model for the LAC Sublayer 1-10 8 1.2.1 General Architect
22、ure. 1-11 9 1.2.2 Protocol Sublayers 1-11 10 1.2.3 Logical Channels 1-12 11 1.2.4 Interfaces 1-16 12 1.2.4.1 Interface to Layer 3. 1-16 13 1.2.4.1.1 Message Control and Status Block (MCSB) 1-16 14 1.2.4.1.2 Interface Primitives . 1-17 15 1.2.4.2 Interface to MAC Sublayer 1-18 16 1.2.4.2.1 Reserved .
23、 1-19 17 1.2.4.2.2 Interface Primitives . 1-19 18 1.2.5 Functional Description . 1-21 19 1.2.5.1 Operation on r-csch 1-22 20 1.2.5.2 Operation on f-csch 1-25 21 1.2.5.3 Operation on r-dsch and f-dsch 1-32 22 1.2.6 ARQ Model . 1-35 23 2 MOBILE STATION REQUIREMENTS. 2-1 24 2.1 Common Channel Operation
24、 2-1 25 2.1.1 Transmission on r-csch 2-1 26 2.1.1.1 Authentication and Message Integrity Sublayer. 2-1 27 2.1.1.1.1 Parameters 2-1 28 2.1.1.1.1.1 Definition of the Authentication and Message Integrity Fields 2-1 29 2.1.1.1.1.2 Requirements for Setting the Authentication Fields . 2-3 30 Copyright Tel
25、ecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-2000.4-D-1 CONTENTS ii 2.1.1.1.1.3 Requirements for Setting the Message Integrity Fields. 2-4 1 2.1.1.1.2 Procedures 2-5 2 2.1.1.1.2.1 Ove
26、rview of Authentication Procedures . 2-5 3 2.1.1.1.2.2 Requirements for Authentication Procedures 2-6 4 2.1.1.1.2.3 Overview of the Integrity Procedures . 2-8 5 2.1.1.1.2.4 Requirements for Message Integrity Procedures on r-csch. 2-9 6 2.1.1.1.2.5 Procedure for computing the MAC-I value . 2-9 7 2.1.
27、1.1.2.6 Procedure for computing the UMAC value2-11 8 2.1.1.2 ARQ Sublayer2-11 9 2.1.1.2.1 Parameters 2-11 10 2.1.1.2.1.1 Definition of the ARQ Fields .2-11 11 2.1.1.2.1.2 Requirements for Setting the ARQ Fields2-13 12 2.1.1.2.2 Procedures.2-14 13 2.1.1.2.2.1 Overview of Transmission and Retransmissi
28、on Procedures.2-14 14 2.1.1.2.2.2 Requirements for Transmission and Retransmission Procedures2-18 15 2.1.1.2.2.3 Accumulated Statistics for r-csch.2-23 16 2.1.1.3 Addressing Sublayer2-27 17 2.1.1.3.1 Parameters 2-27 18 2.1.1.3.1.1 Definition of Addressing Fields.2-28 19 2.1.1.3.1.2 Requirements for
29、Setting the Addressing Fields .2-34 20 2.1.1.3.1.2.1 Value of the MSID_LEN Field2-39 21 2.1.1.3.1.3 Requirements for Setting IMSI Class and IMSI Class-specific 22 Subfield Parameters.2-40 23 2.1.1.3.2 Procedures.2-42 24 2.1.1.4 Utility Sublayer .2-42 25 2.1.1.4.1 Parameters 2-42 26 2.1.1.4.1.1 Messa
30、ge Type Fields.2-42 27 2.1.1.4.1.1.1 Definition of Message Type Fields.2-42 28 2.1.1.4.1.1.2 Requirements for Setting Message Type Fields2-42 29 2.1.1.4.1.2 LAC Length Field .2-44 30 2.1.1.4.1.2.1 Definition of LAC Length Field2-44 31 2.1.1.4.1.2.2 Requirements for Setting LAC Length Field 2-44 32 C
31、opyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-2000.4-D-1 CONTENTS iii 2.1.1.4.1.3 Extended-Encryption Fields 2-44 1 2.1.1.4.1.3.1 Definition of Extended-Encryption Fields.
32、2-44 2 2.1.1.4.1.3.2 Requirements for Setting Extended-Encryption Fields . 2-45 3 2.1.1.4.1.4 LAC Padding Field. 2-45 4 2.1.1.4.1.4.1 Definition of LAC Padding Field . 2-46 5 2.1.1.4.1.4.2 Requirements for Setting LAC Padding Field 2-46 6 2.1.1.4.1.5 Radio Environment Report Fields 2-46 7 2.1.1.4.1.
33、5.1 Definition of Radio Environment Report Fields. 2-46 8 2.1.1.4.1.5.2 Requirements for Setting Radio Environment Report Fields . 2-48 9 2.1.1.4.1.6 PDU Padding Field 2-51 10 2.1.1.4.1.6.1 Definition of PDU Padding Field. 2-51 11 2.1.1.4.1.6.2 Requirements for Setting PDU Padding Field . 2-51 12 2.
34、1.1.4.1.7 MACI Field 2-51 13 2.1.1.4.1.7.1 Definition of MACI field 2-51 14 2.1.1.4.1.7.2 Requirements for Setting MACI Field . 2-52 15 2.1.1.4.2 Procedures 2-52 16 2.1.1.5 Segmentation and Reassembly Sublayer. 2-55 17 2.1.1.5.1 Parameters 2-55 18 2.1.1.5.1.1 Definition of SAR Parameters 2-55 19 2.1
35、.1.5.1.2 Requirements for Setting SAR Parameters. 2-56 20 2.1.1.5.2 Procedures 2-58 21 2.1.2 Reception on f-csch 2-59 22 2.1.2.1 ARQ Sublayer . 2-59 23 2.1.2.1.1 Parameters 2-59 24 2.1.2.1.2 Procedures 2-59 25 2.1.2.1.2.1 Overview of Reception Procedures . 2-59 26 2.1.2.1.2.2 Requirements for Recept
36、ion Procedures. 2-60 27 2.1.2.2 Addressing Sublayer . 2-62 28 2.1.2.2.1 Parameters 2-62 29 2.1.2.2.2 Procedures 2-62 30 2.1.2.2.2.1 Page Match Procedure for the General Page Message. 2-62 31 2.1.2.2.2.2 Page Match Procedure for the Universal Page Message 2-65 32 Copyright Telecommunications Industry
37、 Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-2000.4-D-1 CONTENTS iv 2.1.2.2.2.3 Address Recognition Procedure for Messages Other than the 1 General Page Message and the Universal Page Message .2-69 2 2.1.2.2
38、.2.4 Determination of Address Mismatch 2-72 3 2.1.2.2.2.4.1 Determination of Address Mismatch for the General Page 4 Message .2-72 5 2.1.2.2.2.4.1.1 Requirements for Determination of Address Mismatch for 6 the General Page Message.2-73 7 2.1.2.2.2.4.2 Determination of Address Mismatch for the Univer
39、sal Page 8 Message .2-74 9 2.1.2.2.2.4.2.1 Requirements for Determination of Address Mismatch for 10 the Universal Page Message 2-75 11 2.1.2.2.3 Accumulated Addressing Statistics for f-csch.2-76 12 2.1.2.3 Utility Sublayer .2-77 13 2.1.2.3.1 Parameters 2-77 14 2.1.2.3.2 Procedures.2-77 15 2.1.2.3.2
40、.2 Procedures for Processing of the Universal Page Message.2-78 16 2.1.2.3.2.2.1 Procedures for Reassembly of the Universal Page Block 2-78 17 2.1.2.4 Segmentation and Reassembly (SAR) Sublayer 2-79 18 2.1.2.4.1 Parameters 2-79 19 2.1.2.4.2 Procedures.2-79 20 2.1.2.4.3 Accumulated Statistics for f-c
41、sch.2-83 21 2.1.2.5 Message Integrity Sublayer2-85 22 2.1.2.5.1 Parameters 2-85 23 2.1.2.5.2 Procedures.2-85 24 2.2 Dedicated Channel Operation .2-85 25 2.2.1 Transmission on r-dsch.2-85 26 2.2.1.1 ARQ Sublayer2-85 27 2.2.1.1.1 Parameters 2-85 28 2.2.1.1.1.1 Definition of ARQ Fields.2-86 29 2.2.1.1.
42、1.2 Requirements for Setting ARQ Fields2-86 30 2.2.1.1.2 Procedures.2-87 31 2.2.1.1.2.1 Overview of Transmission and Retransmission Procedures.2-87 32 2.2.1.1.2.2 Requirements for Transmission and Retransmission Procedures2-88 33 2.2.1.1.3 Accumulated ARQ Statistics 2-92 34 Copyright Telecommunicati
43、ons Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-2000.4-D-1 CONTENTS v 2.2.1.2 Utility Sublayer. 2-93 1 2.2.1.2.1 Parameters 2-93 2 2.2.1.2.1.1 Definition of Utility Sublayer Fields . 2-93 3 2.2.1.2.
44、1.2 Requirements for Setting Utility Sublayer Fields 2-95 4 2.2.1.2.2 Procedures 2-99 5 2.2.1.3 Segmentation and Reassembly (SAR) Sublayer 2-101 6 2.2.1.3.1 Parameters 2-101 7 2.2.1.3.1.1 Definition of SAR Parameters 2-101 8 2.2.1.3.1.2 Requirements for Setting SAR Parameters. 2-101 9 2.2.1.3.2 Proc
45、edures 2-103 10 2.2.1.4 Message Integrity Sublayer . 2-103 11 2.2.1.4.1 Parameters 2-103 12 2.2.1.4.2 Procedures 2-103 13 2.2.2 Reception on f-dsch 2-104 14 2.2.2.1 ARQ Sublayer . 2-104 15 2.2.2.1.1 Parameters 2-104 16 2.2.2.1.2 Procedures 2-104 17 2.2.2.1.2.1 Overview of Reception Procedures . 2-10
46、4 18 2.2.2.1.2.2 Requirements for Reception Procedures. 2-105 19 2.2.2.2 Utility Sublayer. 2-107 20 2.2.2.2.1 Parameters 2-107 21 2.2.2.2.2 Procedures 2-107 22 2.2.2.3 Segmentation and Reassembly (SAR) Sublayer 2-107 23 2.2.2.3.1 Parameters 2-107 24 2.2.2.3.2 Procedures 2-107 25 2.2.2.4 Message Inte
47、grity Sublayer . 2-108 26 2.2.2.4.1 Parameters 2-108 27 2.2.2.4.2 Procedures 2-108 28 3 BASE STATION REQUIREMENTS. 3-1 29 3.1 Common Channel Operation 3-1 30 3.1.1 Reception on r-csch 3-1 31 3.1.1.1 Authentication and Message Integrity Sublayer. 3-1 32 Copyright Telecommunications Industry Associati
48、on Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-2000.4-D-1 CONTENTS vi 3.1.1.1.1 Parameters . 3-1 1 3.1.1.1.2 Authentication Procedures 3-1 2 3.1.1.1.3 Message Integrity Procedures 3-2 3 3.1.1.1.4 Security Sequence Numbe
49、r Duplicate and Out-of-Range Detection 4 (refer also to 2.3.12.4.1.5 in 5) 3-3 5 3.1.1.2 ARQ Sublayer. 3-4 6 3.1.1.2.1 Parameters . 3-4 7 3.1.1.2.2 Procedures 3-5 8 3.1.1.2.2.1 Overview of Reception Procedures . 3-5 9 3.1.1.2.2.2 Requirements for the Reception Procedures 3-5 10 3.1.1.3 Addressing Sublayer. 3-6 11 3.1.1.3.1 Parameters . 3-6 12 3.1.1.
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1