TIA-2000 4-F-1-2014 Signaling Link Access Control (LAC) Standard for cdma2000 Spread Spectrum Systems (Incorporates Addendum 1).pdf

1、 TIA-2000.4-F-1E June 2014Signaling Link Access Control (LAC) Standard for cdma2000 Spread Spectrum Systems NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchange

2、ability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of TIA from manufacturing or sellin

3、g products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accordance with the American National

4、 Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems associated with its use or all a

5、pplicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Project No. TIA-PN-2000.4-F-1E, formulated under the cognizance of the TIA

6、TR-45 Mobile (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Docu

7、ment may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs at

8、tention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing

9、terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied

10、with as respects the Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation

11、or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such

12、Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not cons

13、titute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of complianc

14、e with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY TH

15、IRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS

16、 OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SP

17、ECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. T

18、HE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. 3GPP2 C.S0004-F v2.0 Revision History Revision Description of Changes Date Rev.0 v1.0 Initial publication October 1999 Rev.0 v3.0 Bu

19、g fix July 2001 Rev.A v1.0 Revision July 2000 Rev.A v2.0 Bug fix October 2000 Rev.A v5.0 Bug fix July 20001 Rev.A v6.0 Bug fix February 2002 Rev.B v1.0 Revision April 2002 Rev.C v1.0 Revision May 2002 Rev.D v1.0 Revision March 2004 Rev.C v2.0 Bug fix August 2004 Rev.D v2.0 Bug fix October 2005 Rev.E

20、 v1.0 Revision September 2009 Rev.E v2.0 Bug fix March 2011 Rev.E v3.0 Bug fix June 2011 Rev.F v1.0 Revision December 2012 Rev.F v2.0 Bug fix May 2014 3GPP2 C.S0004-F v2.0 i CONTENTS 1 FOREWORD xv 2 NOTES . xvi 3 1 INTRODUCTION 1-1 4 1.1 Scope . 1-1 5 1.2 Requirements Terminology . 1-1 6 1.3 Terms a

21、nd Numeric Information 1-1 7 1.3.1 Terms . 1-1 8 1.3.2 Numeric Information 1-8 9 1.4 Conceptual Model for the LAC Sublayer . 1-11 10 1.4.1 General Architecture 1-11 11 1.4.2 Protocol Sublayers 1-12 12 1.4.3 Logical Channels 1-13 13 1.4.4 Interfaces . 1-16 14 1.4.4.1 Interface to Layer 3 . 1-16 15 1.

22、4.4.1.1 Message Control and Status Block (MCSB) . 1-17 16 1.4.4.1.2 Interface Primitives . 1-18 17 1.4.4.2 Interface to MAC Sublayer 1-19 18 1.4.4.2.1 Reserved . 1-19 19 1.4.4.2.2 Interface Primitives . 1-19 20 1.4.5 Functional Description . 1-22 21 1.4.5.1 Operation on r-csch 1-23 22 1.4.5.2 Operat

23、ion on f-csch 1-26 23 1.4.5.3 Operation on r-dsch and f-dsch 1-33 24 1.4.6 ARQ Model . 1-36 25 1.5 References . 1-38 26 1.6 Informative References . 1-38 27 2 MOBILE STATION REQUIREMENTS 2-1 28 2.1 Common Channel Operation 2-1 29 2.1.1 Transmission on r-csch 2-1 30 2.1.1.1 Authentication and Message

24、 Integrity Sublayer 2-1 31 2.1.1.1.1 Parameters . 2-1 32 3GPP2 C.S0004-F v2.0 ii 2.1.1.1.1.1 Definition of the Authentication and Message Integrity Fields 2-1 1 2.1.1.1.1.2 Requirements for Setting the Authentication Fields 2-3 2 2.1.1.1.1.3 Requirements for Setting the Message Integrity Fields 2-4

25、3 2.1.1.1.2 Procedures 2-5 4 2.1.1.1.2.1 Overview of Authentication Procedures 2-5 5 2.1.1.1.2.2 Requirements for Authentication Procedures .2-6 6 2.1.1.1.2.3 Overview of the Integrity Procedures 2-8 7 2.1.1.1.2.4 Requirements for Message Integrity Procedures on r-csch 2-9 8 2.1.1.1.2.5 Procedure fo

26、r computing the MAC-I value 2-9 9 2.1.1.1.2.6 Procedure for computing the UMAC value 2-11 10 2.1.1.2 ARQ Sublayer 2-11 11 2.1.1.2.1 Parameters 2-11 12 2.1.1.2.1.1 Definition of the ARQ Fields . 2-11 13 2.1.1.2.1.2 Requirements for Setting the ARQ Fields 2-13 14 2.1.1.2.2 Procedures 2-14 15 2.1.1.2.2

27、.1 Overview of Transmission and Retransmission Procedures . 2-14 16 2.1.1.2.2.2 Requirements for Transmission and Retransmission Procedures 2-18 17 2.1.1.2.2.3 Accumulated Statistics for r-csch . 2-23 18 2.1.1.3 Addressing Sublayer 2-27 19 2.1.1.3.1 Parameters 2-27 20 2.1.1.3.1.1 Definition of Addre

28、ssing Fields . 2-28 21 2.1.1.3.1.2 Requirements for Setting the Addressing Fields 2-34 22 2.1.1.3.1.2.1 Value of the MSID_LEN Field 2-39 23 2.1.1.3.1.3 Requirements for Setting IMSI Class and IMSI Class-specific 24 Subfield Parameters . 2-40 25 2.1.1.3.2 Procedures 2-42 26 2.1.1.4 Utility Sublayer .

29、 2-42 27 2.1.1.4.1 Parameters 2-42 28 2.1.1.4.1.1 Message Type Fields . 2-42 29 2.1.1.4.1.1.1 Definition of Message Type Fields . 2-42 30 2.1.1.4.1.1.2 Requirements for Setting Message Type Fields 2-42 31 2.1.1.4.1.2 LAC Length Field . 2-44 32 2.1.1.4.1.2.1 Definition of LAC Length Field 2-44 33 3GP

30、P2 C.S0004-F v2.0 iii 2.1.1.4.1.2.2 Requirements for Setting LAC Length Field 2-44 1 2.1.1.4.1.3 Extended-Encryption Fields 2-45 2 2.1.1.4.1.3.1 Definition of Extended-Encryption Fields . 2-45 3 2.1.1.4.1.3.2 Requirements for Setting Extended-Encryption Fields . 2-45 4 2.1.1.4.1.4 LAC Padding Field

31、. 2-46 5 2.1.1.4.1.4.1 Definition of LAC Padding Field . 2-46 6 2.1.1.4.1.4.2 Requirements for Setting LAC Padding Field 2-46 7 2.1.1.4.1.5 Radio Environment Report Fields 2-46 8 2.1.1.4.1.5.1 Definition of Radio Environment Report Fields . 2-46 9 2.1.1.4.1.5.2 Requirements for Setting Radio Environ

32、ment Report Fields . 2-48 10 2.1.1.4.1.6 PDU Padding Field 2-51 11 2.1.1.4.1.6.1 Definition of PDU Padding Field . 2-51 12 2.1.1.4.1.6.2 Requirements for Setting PDU Padding Field . 2-52 13 2.1.1.4.1.7 MACI Field 2-52 14 2.1.1.4.1.7.1 Definition of MACI field 2-52 15 2.1.1.4.1.7.2 Requirements for S

33、etting MACI Field . 2-52 16 2.1.1.4.2 Procedures 2-52 17 2.1.1.5 Segmentation and Reassembly Sublayer . 2-56 18 2.1.1.5.1 Parameters . 2-56 19 2.1.1.5.1.1 Definition of SAR Parameters 2-56 20 2.1.1.5.1.2 Requirements for Setting SAR Parameters . 2-57 21 2.1.1.5.2 Procedures 2-59 22 2.1.2 Reception o

34、n f-csch 2-59 23 2.1.2.1 ARQ Sublayer . 2-59 24 2.1.2.1.1 Parameters . 2-59 25 2.1.2.1.2 Procedures 2-60 26 2.1.2.1.2.1 Overview of Reception Procedures . 2-60 27 2.1.2.1.2.2 Requirements for Reception Procedures . 2-61 28 2.1.2.2 Addressing Sublayer . 2-62 29 2.1.2.2.1 Parameters . 2-62 30 2.1.2.2.

35、2 Procedures 2-63 31 2.1.2.2.2.1 Page Match Procedure for the General Page Message . 2-63 32 3GPP2 C.S0004-F v2.0 iv 2.1.2.2.2.2 Page Match Procedure for the Universal Page Message . 2-66 1 2.1.2.2.2.3 Address Recognition Procedure for Messages Other than the 2 General Page Message and the Universal

36、 Page Message . 2-70 3 2.1.2.2.2.4 Determination of Address Mismatch. 2-72 4 2.1.2.2.2.4.1 Determination of Address Mismatch for the General Page 5 Message . 2-73 6 2.1.2.2.2.4.1.1 Requirements for Determination of Address Mismatch 7 for the General Page Message 2-73 8 2.1.2.2.2.4.2 Determination of

37、 Address Mismatch for the Universal Page 9 Message . 2-74 10 2.1.2.2.2.4.2.1 Requirements for Determination of Address Mismatch 11 for the Universal Page Message . 2-75 12 2.1.2.2.3 Accumulated Addressing Statistics for f-csch . 2-77 13 2.1.2.3 Utility Sublayer . 2-78 14 2.1.2.3.1 Parameters 2-78 15

38、 2.1.2.3.2 Procedures 2-78 16 2.1.2.3.2.1 Procedures for Processing of the Universal Page Message . 2-79 17 2.1.2.3.2.1.1 Procedures for Reassembly of the Universal Page Block 2-79 18 2.1.2.4 Segmentation and Reassembly (SAR) Sublayer 2-80 19 2.1.2.4.1 Parameters 2-80 20 2.1.2.4.2 Procedures 2-80 21

39、 2.1.2.4.3 Accumulated Statistics for f-csch . 2-84 22 2.1.2.5 Message Integrity Sublayer 2-86 23 2.1.2.5.1 Parameters 2-86 24 2.1.2.5.2 Procedures 2-86 25 2.2 Dedicated Channel Operation . 2-86 26 2.2.1 Transmission on r-dsch 2-86 27 2.2.1.1 ARQ Sublayer 2-86 28 2.2.1.1.1 Parameters 2-86 29 2.2.1.1

40、.1.1 Definition of ARQ Fields . 2-87 30 2.2.1.1.1.2 Requirements for Setting ARQ Fields 2-87 31 2.2.1.1.2 Procedures 2-88 32 2.2.1.1.2.1 Overview of Transmission and Retransmission Procedures . 2-88 33 2.2.1.1.2.2 Requirements for Transmission and Retransmission Procedures 2-89 34 3GPP2 C.S0004-F v2

41、.0 v 2.2.1.1.3 Accumulated ARQ Statistics 2-93 1 2.2.1.2 Utility Sublayer . 2-94 2 2.2.1.2.1 Parameters . 2-94 3 2.2.1.2.1.1 Definition of Utility Sublayer Fields . 2-94 4 2.2.1.2.1.2 Requirements for Setting Utility Sublayer Fields 2-96 5 2.2.1.2.2 Procedures 2-100 6 2.2.1.3 Segmentation and Reasse

42、mbly (SAR) Sublayer . 2-102 7 2.2.1.3.1 Parameters . 2-102 8 2.2.1.3.1.1 Definition of SAR Parameters 2-102 9 2.2.1.3.1.2 Requirements for Setting SAR Parameters . 2-102 10 2.2.1.3.2 Procedures 2-104 11 2.2.1.4 Message Integrity Sublayer . 2-104 12 2.2.1.4.1 Parameters . 2-104 13 2.2.1.4.2 Procedure

43、s 2-104 14 2.2.2 Reception on f-dsch 2-105 15 2.2.2.1 ARQ Sublayer . 2-105 16 2.2.2.1.1 Parameters . 2-105 17 2.2.2.1.2 Procedures 2-105 18 2.2.2.1.2.1 Overview of Reception Procedures . 2-105 19 2.2.2.1.2.2 Requirements for Reception Procedures . 2-106 20 2.2.2.2 Utility Sublayer . 2-108 21 2.2.2.2

44、.1 Parameters . 2-108 22 2.2.2.2.2 Procedures 2-108 23 2.2.2.3 Segmentation and Reassembly (SAR) Sublayer . 2-108 24 2.2.2.3.1 Parameters . 2-108 25 2.2.2.3.2 Procedures 2-108 26 2.2.2.4 Message Integrity Sublayer . 2-109 27 2.2.2.4.1 Parameters . 2-109 28 2.2.2.4.2 Procedures 2-109 29 3 BASE STATIO

45、N REQUIREMENTS 3-1 30 3.1 Common Channel Operation 3-1 31 3.1.1 Reception on r-csch 3-1 32 3GPP2 C.S0004-F v2.0 vi 3.1.1.1 Authentication and Message Integrity Sublayer .3-1 1 3.1.1.1.1 Parameters 3-1 2 3.1.1.1.2 Authentication Procedures .3-1 3 3.1.1.1.3 Message Integrity Procedures .3-2 4 3.1.1.1.

46、4 Security Sequence Number Duplicate and Out-of-Range Detection 5 (refer also to 2.3.12.4.1.5 in 5) .3-3 6 3.1.1.2 Sublayer 3-4 7 3.1.1.2.1 Parameters 3-4 8 3.1.1.2.2 Procedures 3-5 9 3.1.1.2.2.1 Overview of Reception Procedures 3-5 10 3.1.1.2.2.2 Requirements for the Reception Procedures .3-5 11 3.

47、1.1.3 Addressing Sublayer 3-6 12 3.1.1.3.1 Parameters 3-6 13 3.1.1.3.2 Procedures 3-6 14 3.1.1.4 Utility Sublayer .3-6 15 3.1.1.4.1 Parameters 3-6 16 3.1.1.4.2 Procedures 3-6 17 3.1.1.5 Segmentation and Reassembly (SAR) Sublayer 3-7 18 3.1.1.5.1 Parameters 3-7 19 3.1.1.5.2 Procedures 3-7 20 3.1.2 Tr

48、ansmission on f-csch .3-9 21 3.1.2.1 ARQ Sublayer 3-9 22 3.1.2.1.1 Parameters 3-9 23 3.1.2.1.1.1 Definition of ARQ Fields .3-9 24 3.1.2.1.1.2 Requirements for Setting ARQ Fields 3-10 25 3.1.2.1.2 Procedures 3-11 26 3.1.2.1.2.1 Overview of Transmission and Retransmission Procedures . 3-11 27 3.1.2.1.

49、2.2 Requirements for Transmission and Retransmission Procedures 3-11 28 3.1.2.2 Addressing Sublayer 3-13 29 3.1.2.2.1 Parameters 3-13 30 3.1.2.2.1.1 Addressing Fields of Page Records in a General Page Message 3-13 31 3.1.2.2.1.1.1 Page Class Fields of a General Page Message 3-13 32 3GPP2 C.S0004-F v2.0 vii 3.1.2.2.1.1.1.1 Definition of Page Class Fields of a General Page 1 Message . 3-13 2 3.1.2.2.1.1.1.2 Requirements for Setting Page Class Fields of a General 3 Page Message . 3-14 4 3.1.2.2.1.1.2 Page Type-specific Fields of a General Page Message 3-18 5 3.1.2.2.1.1.3 Definition of