TIA-2001 6-E-1-2010 Interoperability Specification (IOS) for cdma2000 Access Network Interfaces-Part 6 (A8 and A9 Interfaces) (Addendum to TIA-2001 6-E).pdf

1、 TIA-2001.6-E-1 (Addendum to TIA-2001.6-E)January 2010 Interoperability Specification (IOS) forcdma2000Access Network Interfaces Part 6 (A8 and A9 Interfaces) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 NOTICE TIA Engineering Standards and Publi

2、cations are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular

3、 need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary

4、use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation wh

5、atever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to d

6、etermine the applicability of regulatory limitations before its use. (From Project No. PN-3-4545.6-RV5-AD1, formulated under the cognizance of the TIA TR-45 Mobile (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form;

7、 (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. T

8、IA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims

9、any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are r

10、easonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. If the Document contains one or more Normative References to a document published by another organizat

11、ion (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4th edition) t

12、hen (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and pub

13、lished pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance

14、with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCER

15、NING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESEN

16、TATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL

17、DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BR

18、EACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOU

19、T SUCH LIMITATIONS.TIA-2001.6-E-1 Table of Contents 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 1.0 Introduction 1 1.1 Overview 1 1.1.1 Purpose . 1 1.1.2 Scope 1 1.2 References 1 1.2.1 Nor

20、mative References 1 1.2.2 Informative References. 2 1.3 Terminology . 2 1.3.1 Acronyms 2 1.3.2 Definitions 3 1.4 Message Body, Coding, and Ordering of Elements 3 1.5 Forward Compatibility Guidelines . 5 1.6 Message Processing Guidelines 5 1.7 Message Definition Guidelines. 6 2.0 Message Procedures .

21、 9 2.1 A8/A9 Interface Setup Procedures . 9 2.1.1 A9-Setup-A8. 9 2.1.1.1 Successful Operation 9 2.1.1.2 Failure Operation 9 2.1.2 A9-Connect-A8. 10 2.1.2.1 Successful Operation 10 2.1.2.2 Failure Operation 10 2.1.3 A9-BS Service Request 10 2.1.3.1 Successful Operation 10 2.1.3.2 Failure Operation 10

22、 2.1.4 A9-BS Service Response 10 2.1.4.1 Successful Operation 10 2.1.4.2 Failure Operation 10 2.2 A8/A9 Interface Clearing Procedures. 11 2.2.1 A9-Release-A8 . 11 2.2.1.1 Successful Operation 11 2.2.1.2 Failure Operation 12 2.2.3 A9-Release-A8 Complete. 12 2.2.3.1 Successful Operation 12 2.2.3.2 Fai

23、lure Operation 12 2.2.4 A9-Disconnect-A812 2.2.4.1 Successful Operation 12 2.2.4.2 Failure Operation 12 2.3 A8/A9 Interface Handoff Procedures . 13 2.3.1 A9-Air Link (AL) Connected . 13 2.3.1.1 Successful Operation 13 2.3.1.2 Failure Operation 13 2.3.2 A9-Air Link (AL) Connected Ack 13 2.3.2.1 Succe

24、ssful Operation 13 2.3.2.2 Failure Operation 14 2.3.3 A9-Air Link (AL) Disconnected. 14 2.3.3.1 Successful Operation 14 2.3.3.2 Failure Operation 14 2.3.4 A9-Air Link (AL) Disconnected Ack. 14 2.3.4.1 Successful Operation 14 2.3.4.2 Failure Operation 14 2.4 A8/A9 Interface Maintenance Procedures 14

25、2.4.1 A9-Version Info 14 i TIA-2001.6-E-1 2.4.1.1 Successful Operation 15 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 2.4.1.2 Failure Operation 15 2.4.2 A9-Version Info Ack 15 2.4.2.1 S

26、uccessful Operation 15 2.4.2.2 Failure Operation 15 2.5 A9 Session Update Procedures. 15 2.5.1 A9-Update-A8 15 2.5.1.1 Successful Operation 16 2.5.1.2 Failure Operation 16 2.5.2 A9-Update-A8 Ack. 16 2.5.2.1 Successful Operation 17 2.5.2.2 Failure Operation 17 2.6 A8/A9 Interface Data Delivery Proced

27、ures 17 2.6.1 A9-Short Data Delivery 17 2.6.1.1 Successful Operation 17 2.6.1.2 Failure Operation 17 2.6.2 A9-Short Data Ack .17 2.6.2.1 Successful Operation 18 2.6.2.2 Failure Operation 18 3.0 Message Formats 19 3.1 A8/A9 Interface Setup Messages19 3.1.1 A9-Setup-A8. 19 3.1.2 A9-Connect-A8. 25 3.1.

28、3 A9-BS Service Request 30 3.1.4 A9-BS Service Response 32 3.2 A8/A9 Interface Clearing Messages. 33 3.2.1 A9-Release-A8 . 33 3.2.2 A9-Release-A8 Complete. 37 3.2.3 A9-Disconnect-A839 3.3 A8/A9 Interface Handoff Messages . 43 3.3.1 A9-AL (Air Link) Connected . 43 3.3.2 A9-AL (Air Link) Connected Ack

29、 46 3.3.3 A9-AL Disconnected 48 3.3.4 A9-AL Disconnected Ack 50 3.4 A8/A9 Interface Maintenance Messages 51 3.4.1 A9-Version Info 51 3.4.2 A9-Version Info Ack 53 3.5 A9 Session Update Procedures. 54 3.5.1 A9-Update-A8 54 3.5.2 A9-Update-A8 Ack. 59 3.6 A8/A9 Interface Data Delivery Messages 60 3.6.1

30、A9-Short Data Delivery 60 3.6.2 A9-Short Data Ack .63 4.0 Information Element Definitions 65 4.1 Generic Information Element Encoding. 65 4.1.1 Conventions 65 4.1.2 Information Element Identifiers 66 4.1.3 Additional Coding and Interpretation Rules for Information Elements 67 4.1.4 Cross Reference o

31、f Information Elements With Messages. 68 4.2 Information Elements . 72 4.2.1 Active Connection Time in Seconds. 72 4.2.2 Mobile Identity . 73 4.2.3 Cause 75 4.2.4 SR_ID . 77 4.2.5 PDSN Address 78 4.2.6 User Zone ID 79 ii TIA-2001.6-E-1 4.2.7 Quality of Service Parameters 80 1 2 3 4 5 6 7 8 9 10 11 1

32、2 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 4.2.8 Service Option 81 4.2.9 ADDS User Part . 82 4.2.10 Call Connection Reference . 83 4.2.11 Correlation ID. 84 4.2.12 Anchor P-P Address . 85 4.2.13 A9 Message Type .86 4.2.14 CON_REF 87 4.2.15 A9 Cell Identifier 88 4.2.16 A8 Tra

33、ffic ID 89 4.2.17 A9 Indicators 91 4.2.18 Data Count 93 4.2.19 Access Network Identifiers. 94 4.2.20 IS-2000 Service Configuration Record. 95 4.2.21 Software Version 96 4.2.22 Anchor PDSN Address . 97 4.2.23 A9 PDSN Code. 98 4.2.24 RN-PDIT 99 4.2.25 Service Instance Info 100 5.0 Timer Definitions .

34、101 5.1 Timer Values 101 5.2 Timer Definitions . 101 5.2.1 TA8-setup101 5.2.2 Tdiscon9101 5.2.3 Trel9101 5.2.4 Talc9. 101 5.2.5 Twaitho9. 102 5.2.6 Tbsreq9. 102 5.2.7 Tald9. 102 5.2.8 Tsdd9. 102 5.2.9 Tupd9. 102 5.2.10 Taldak102 5.2.11 Tvers9102 iii TIA-2001.6-E-1 iv 1 2 3 4 5 6 7 8 9 10 11 12 13 14

35、 15 16 17 List of Tables Table 1.4-1 Element Flow DIRECTION Indication 4 Table 4.1.2-1 A9 Information Element Identifiers Sorted by Identifier Value . 66 Table 4.1.4-1 Cross Reference of Information Elements with Messages . 68 Table 4.2.2-1 Mobile Identity - Type of Identity Coding 73 Table 4.2.3-1

36、Cause Class. 75 Table 4.2.3-2 Cause Values 76 Table 4.2.8-1 Service Option Values 81 Table 4.2.15-1 Cell Identifier. 88 Table 4.2.16-1 A8 Traffic ID - A8 Transport Protocol Stack 89 Table 4.2.16-2 A8 Traffic ID - Address Type 90 Table 4.2.17-1 A9 Indicators SDB Supported. 91 Table 4.2.23-1 PDSN Code

37、 Values 98 Table 5.1-1 Timer Values and Ranges Sorted by Name 101 TIA-2001.6-E-1 1.0 Introduction 1 2 1.1 Overview 3 4 5 This document contains the message procedures, bitmaps, information elements and timers used to define the A9 interface. 1.1.1 Purpose 6 7 8 9 10 The purpose of this document is t

38、o provide the standard for interfacing a PCF with one or more BSs. This document defines the functional capabilities, including services and features, of the specified interface. These services and features are the defining characteristics that are the basis for the overall system standard. 1.1.2 Sc

39、ope 11 12 13 14 15 16 17 18 This standard provides the specification for the interface which coincides with the Reference Point “Aquinter” defined in the TR45 Network Reference Model shown in I-2. The scope of this standard includes the following topics: Descriptions of the specified functional capa

40、bilities that provide packet data services across the BS-PCF interface; Descriptions of the division of responsibility of the functions provided between the BS and the PCF without prescribing specific implementations. 1.2 References 19 20 21 22 23 References are either normative or informative. A no

41、rmative reference is used to include another document as a mandatory part of a 3rd Generation Partnership Project 2 (3GPP2) specification. Documents that provide additional non-essential information are included in the informative references section. 1.2.1 Normative References 24 25 26 27 28 29 30 3

42、1 32 33 34 35 36 37 38 39 40 41 42 The following standards contain provisions which, through reference in this text, constitute provisions of this standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this s

43、tandard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. 1 3GPP2 C.S0001-E v1.0, Introduction to cdma2000 Standards for Spread Spectrum Systems, May 2009. 2 3GPP2 C.S0002-E v1.0, Physical Layer Standard for cdma2000 Spread Spectrum

44、Systems, May 2009. 3 3GPP2 C.S0003-E v1.0, Medium Access Control (MAC) Standard for cdma2000 Spread Spectrum Systems, May 2009. 4 3GPP2 C.S0004-E v1.0, Signaling Link Access Control (LAC) Standard for cdma2000 Spread Spectrum Systems, June 2009. 5 3GPP2 C.S0005-E v1.0, Upper Layer (Layer 3) Signalin

45、g Standard for cdma2000 Spread Spectrum Systems, June 2009. 6 3GPP2 C.S0006-D v2.0, Analog Signaling Standard for cdma2000 Spread Spectrum Systems, September 2005. 7 Reserved. 1 Section 1 TIA-2001.6-E-1 8 3GPP2 X.S0011-D v2.0, Wireless IP Network Standard, six parts, November 2008. 1 2 3 4 5 6 7 8 9

46、 10 11 12 13 14 15 16 17 18 19 20 21 9 3GPP2 X.S0004-E v8.0, Mobile Application Part (MAP), January 2009. 10 Reserved. 11 3GPP2 A.S0011-D v2.0, Interoperability Specification (IOS) for cdma2000 Access Network Interfaces Part 1 Overview, August 2009. 12 Reserved. 13 3GPP2 A.S0013-D v2.0, Interoperabi

47、lity Specification (IOS) for cdma2000 Access Network Interfaces Part 3 Features, August 2009. 14 3GPP2 A.S0014-D v2.0, Interoperability Specification (IOS) for cdma2000 Access Network Interfaces Part 4 (A1, A1p, A2, and A5 Interfaces), August 2009. 15 Reserved. 16 Reserved. 17 3GPP2 A.S0017-D v2.0,

48、Interoperability Specification (IOS) for cdma2000 Access Network Interfaces Part 7 (A10 and A11 Interfaces), August 2009. 18 3GPP2 C.S0017-0-2, Data Service Options for Spread Spectrum Systems - Addendum 2, August 2000. 19 3GPP2 N.S0017-B v1.0, International Implementation of Wireless Telecommunicat

49、ion Systems Compliant with TIA/EIA-41, December 2002. 1.2.2 Informative References 22 23 24 25 26 27 I-1 3GPP2 C.R1001-G v1.0, Administration of Parameter Value Assignments for CDMA Spread Spectrum Standards, June 2009. I-2 3GPP2 S.R0005-B v2.0, Network Reference Model for cdma2000 Spread Spectrum Systems, May 2007. 1.3 Terminology 28 29 1.3.1 Acronyms 30 31 Acronym Meaning 3GPP2 Third Generation Partnership Project 2 ADDS Application Data Delivery Service BS Base StationCCPD Common Channel Packet Data CDMA Code Division Multiple