TIA-2001 6-E-2010 Interoperability Specification (IOS) for cdma2000 Access Network Interfaces-Part 6 (A8 and A9 Interfaces).pdf

1、 TIA-2001.6-E January 2010 Interoperability Specification (IOS) forcdma2000Access Network Interfaces Part 6 (A8 and A9 Interfaces) NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, f

2、acilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of TIA from

3、manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accordance wit

4、h the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems associate

5、d with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Project No. PN-3-4545.6-RV5, formulated under the co

6、gnizance of the TIA TR-45 Mobile (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of c

7、ontents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed a

8、nd called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussio

9、ns of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual

10、 have been complied with as respects the Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specificat

11、ion, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4th edition) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance

12、relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the oth

13、er SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or an

14、y claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONI

15、NFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EF

16、FECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY

17、 AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILI

18、TY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. TIA-2001.6-E i Table of Contents 1 2 1.0 Introduction 1 3 1.1 Overview 1 4 1.1.1 Purpose . 1 5 1.1.2 Scope 1 6

19、1.2 References 1 7 1.2.1 Normative References 1 8 1.3 Terminology . 2 9 1.3.1 Acronyms 2 10 1.3.2 Definitions 3 11 1.4 Message Body, Coding, and Ordering of Elements 3 12 1.5 Forward Compatibility Guidelines . 5 13 1.6 Message Processing Guidelines 5 14 1.7 Message Definition Guidelines. 6 15 2.0 Me

20、ssage Procedures . 7 16 2.1 A8/A9 Interface Setup Procedures . 7 17 2.1.1 A9-Setup-A8. 7 18 2.1.1.1 Successful Operation 7 19 2.1.1.2 Failure Operation 7 20 2.1.2 A9-Connect-A8. 8 21 2.1.2.1 Successful Operation 8 22 2.1.2.2 Failure Operation 8 23 2.1.3 A9-BS Service Request 8 24 2.1.3.1 Successful

21、Operation 8 25 2.1.3.2 Failure Operation 8 26 2.1.4 A9-BS Service Response 8 27 2.1.4.1 Successful Operation 8 28 2.1.4.2 Failure Operation 8 29 2.2 A8/A9 Interface Clearing Procedures. 9 30 2.2.1 A9-Release-A8 . 9 31 2.2.1.1 Successful Operation 9 32 2.2.1.2 Failure Operation 10 33 2.2.3 A9-Release

22、-A8 Complete. 10 34 2.2.3.1 Successful Operation 10 35 2.2.3.2 Failure Operation 10 36 2.2.4 A9-Disconnect-A8 10 37 2.2.4.1 Successful Operation 10 38 2.2.4.2 Failure Operation 10 39 2.3 A8/A9 Interface Handoff Procedures . 11 40 2.3.1 A9-Air Link (AL) Connected . 11 41 2.3.1.1 Successful Operation

23、11 42 2.3.1.2 Failure Operation 11 43 2.3.2 A9-Air Link (AL) Connected Ack 11 44 2.3.2.1 Successful Operation 11 45 2.3.2.2 Failure Operation 12 46 2.3.3 A9-Air Link (AL) Disconnected. 12 47 2.3.3.1 Successful Operation 12 48 2.3.3.2 Failure Operation 12 49 2.3.4 A9-Air Link (AL) Disconnected Ack. 1

24、2 50 2.3.4.1 Successful Operation 12 51 2.3.4.2 Failure Operation 12 52 2.4 A8/A9 Interface Maintenance Procedures 12 53 2.4.1 A9-Version Info 12 54 2.4.1.1 Successful Operation 13 55 TIA-2001.6-E ii 2.4.1.2 Failure Operation 13 1 2.4.2 A9-Version Info Ack 13 2 2.4.2.1 Successful Operation 13 3 2.4.

25、2.2 Failure Operation 13 4 2.5 A9 Session Update Procedures. 13 5 2.5.1 A9-Update-A8 13 6 2.5.1.1 Successful Operation 14 7 2.5.1.2 Failure Operation 14 8 2.5.2 A9-Update-A8 Ack. 14 9 2.5.2.1 Successful Operation 14 10 2.5.2.2 Failure Operation 14 11 2.6 A8/A9 Interface Data Delivery Procedures 15 1

26、2 2.6.1 A9-Short Data Delivery 15 13 2.6.1.1 Successful Operation 15 14 2.6.1.2 Failure Operation 15 15 2.6.2 A9-Short Data Ack . 15 16 2.6.2.1 Successful Operation 15 17 2.6.2.2 Failure Operation 16 18 3.0 Message Formats 17 19 3.1 A8/A9 Interface Setup Messages 17 20 3.1.1 A9-Setup-A8. 17 21 3.1.2

27、 A9-Connect-A8. 23 22 3.1.3 A9-BS Service Request 28 23 3.1.4 A9-BS Service Response 30 24 3.2 A8/A9 Interface Clearing Messages. 31 25 3.2.1 A9-Release-A8 . 31 26 3.2.2 A9-Release-A8 Complete. 35 27 3.2.3 A9-Disconnect-A8 37 28 3.3 A8/A9 Interface Handoff Messages . 41 29 3.3.1 A9-AL (Air Link) Con

28、nected . 41 30 3.3.2 A9-AL (Air Link) Connected Ack 44 31 3.3.3 A9-AL Disconnected 46 32 3.3.4 A9-AL Disconnected Ack 48 33 3.4 A8/A9 Interface Maintenance Messages 49 34 3.4.1 A9-Version Info 49 35 3.4.2 A9-Version Info Ack 51 36 3.5 A9 Session Update Procedures. 52 37 3.5.1 A9-Update-A8 52 38 3.5.

29、2 A9-Update-A8 Ack. 57 39 3.6 A8/A9 Interface Data Delivery Messages 58 40 3.6.1 A9-Short Data Delivery 58 41 3.6.2 A9-Short Data Ack . 61 42 4.0 Information Element Definitions 63 43 4.1 Generic Information Element Encoding. 63 44 4.1.1 Conventions 63 45 4.1.2 Information Element Identifiers 64 46

30、4.1.3 Additional Coding and Interpretation Rules for Information Elements 65 47 4.1.4 Cross Reference of Information Elements With Messages. 66 48 4.2 Information Elements . 70 49 4.2.1 Active Connection Time in Seconds. 70 50 4.2.2 Mobile Identity . 71 51 4.2.3 Cause 73 52 4.2.4 SR_ID . 75 53 4.2.5

31、 PDSN Address 76 54 4.2.6 User Zone ID 77 55 4.2.7 Quality of Service Parameters 78 56 TIA-2001.6-E iii 4.2.8 Service Option 79 1 4.2.9 ADDS User Part . 80 2 4.2.10 Call Connection Reference . 81 3 4.2.11 Correlation ID. 82 4 4.2.12 Anchor P-P Address . 83 5 4.2.13 A9 Message Type . 84 6 4.2.14 CON_

32、REF 85 7 4.2.15 A9 Cell Identifier 86 8 4.2.16 A8 Traffic ID 87 9 4.2.17 A9 Indicators 89 10 4.2.18 Data Count 91 11 4.2.19 Access Network Identifiers. 92 12 4.2.20 IS-2000 Service Configuration Record. 93 13 4.2.21 Software Version 94 14 4.2.22 Anchor PDSN Address . 95 15 4.2.23 A9 PDSN Code. 96 16

33、 4.2.24 RN-PDIT 97 17 4.2.25 Service Instance Info 98 18 5.0 Timer Definitions . 99 19 5.1 Timer Values 99 20 5.2 Timer Definitions . 99 21 5.2.1 TA8-setup99 22 5.2.2 Tdiscon999 23 5.2.3 Trel999 24 5.2.4 Talc9. 99 25 5.2.5 Twaitho9. 100 26 5.2.6 Tbsreq9. 100 27 5.2.7 Tald9. 100 28 5.2.8 Tsdd9. 100 2

34、9 5.2.9 Tupd9. 100 30 5.2.10 Taldak100 31 5.2.11 Tvers9100 32 33 TIA-2001.6-E iv List of Tables 1 2 Table 1.4-1 Element Flow DIRECTION Indication 3 3 Table 4.1.2-1 A9 Information Element Identifiers Sorted by Identifier Value . 64 4 Table 4.1.4-1 Cross Reference of Information Elements with Messages

35、 . 66 5 Table 4.2.2-1 Mobile Identity - Type of Identity Coding 71 6 Table 4.2.3-1 Cause Class. 73 7 Table 4.2.3-2 Cause Values 74 8 Table 4.2.8-1 Service Option Values 79 9 Table 4.2.15-1 Cell Identifier. 86 10 Table 4.2.16-1 A8 Traffic ID - A8 Transport Protocol Stack 87 11 Table 4.2.16-2 A8 Traff

36、ic ID - Address Type 88 12 Table 4.2.17-1 A9 Indicators SDB Supported. 89 13 Table 4.2.23-1 PDSN Code Values 96 14 Table 5.1-1 Timer Values and Ranges Sorted by Name 99 15 16 17 TIA-2001.6-E 1 Section 1 1.0 Introduction 1 2 1.1 Overview 3 This document contains the message procedures, bitmaps, infor

37、mation elements and 4 timers used to define the A9 interface. 5 1.1.1 Purpose 6 The purpose of this document is to provide the standard for interfacing a PCF with one or 7 more BSs. This document defines the functional capabilities, including services and 8 features, of the specified interface. Thes

38、e services and features are the defining 9 characteristics that are the basis for the overall system standard. 10 1.1.2 Scope 11 This standard provides the specification for the interface which coincides with the 12 Reference Point “Aquinter” defined in the TR45 Network Reference Model shown in 21.

39、13 The scope of this standard includes the following topics: 14 Descriptions of the specified functional capabilities that provide packet data services 15 across the BS-PCF interface; 16 Descriptions of the division of responsibility of the functions provided between the 17 BS and the PCF without pr

40、escribing specific implementations. 18 1.2 References 19 20 1.2.1 Normative References 21 The following standards contain provisions which, through reference in this text, 22 constitute provisions of this standard. At the time of publication, the editions indicated 23 were valid. All standards are s

41、ubject to revision, and parties to agreements based on this 24 standard are encouraged to investigate the possibility of applying the most recent editions 25 of the standards indicated below. ANSI and TIA maintain registers of currently valid 26 national standards published by them. 27 1 3GPP2 C.S00

42、01-D v2.0, Introduction to cdma2000 Standards for Spread 28 Spectrum Systems, September 2005. 29 2 3GPP2 C.S0002-D v2.0, Physical Layer Standard for cdma2000 Spread 30 Spectrum Systems, September 2005. 31 3 3GPP2 C.S0003-D v2.0, Medium Access Control (MAC) Standard for 32 cdma2000 Spread Spectrum Sy

43、stems, September 2005. 33 4 3GPP2 C.S0004-D v2.0, Signaling Link Access Control (LAC) Standard for 34 cdma2000 Spread Spectrum Systems, September 2005. 35 5 3GPP2 C.S0005-D v2.0, Upper Layer (Layer 3) Signaling Standard for 36 cdma2000 Spread Spectrum Systems, September 2005. 37 6 3GPP2 C.S0006-D v2

44、.0, Analog Signaling Standard for cdma2000 Spread 38 Spectrum Systems, September 2005. 39 7 Reserved. 40 8 3GPP2 X.S0011-D v1.0, Wireless IP Network Standard, six parts, February 41 2006. 42 TIA-2001.6-E Section 1 2 9 3GPP2 N.S0005, Cellular Radiotelecommunications Intersystem Operations, 1 December

45、 1997. 2 10 Reserved. 3 11 3GPP2 A.S0011-D v1.0, Interoperability Specification (IOS) for cdma2000 4 Access Network Interfaces Part 1 Overview, June 2007. 5 12 Reserved. 6 13 3GPP2 A.S0013-D v1.0, Interoperability Specification (IOS) for cdma2000 7 Access Network Interfaces Part 3 Features, June 200

46、7. 8 14 3GPP2 A.S0014-D v1.0, Interoperability Specification (IOS) for cdma2000 9 Access Network Interfaces Part 4 (A1, A1p, A2, and A5 Interfaces), June 2007. 10 15 Reserved. 11 16 Reserved. 12 17 3GPP2 A.S0017-D v1.0, Interoperability Specification (IOS) for cdma2000 13 Access Network Interfaces P

47、art 7 (A10 and A11 Interfaces), June 2007. 14 18 3GPP2 C.S0017-0-2, Data Service Options for Spread Spectrum Systems - 15 Addendum 2, August 2000. 16 19 3GPP2 N.S0017-B v1.0, International Implementation of Wireless 17 Telecommunication Systems Compliant with TIA/EIA-41, December 2002. 18 20 3GPP2 C

48、.R1001-F v1.0, Administration of Parameter Value Assignments for 19 CDMA Spread Spectrum Standards, December 2006. 20 21 3GPP2 S.R0005-B, Network Reference Model for cdma2000 Spread Spectrum 21 Systems, April 2001. 22 1.3 Terminology 23 24 1.3.1 Acronyms 25 26 Acronym Meaning 3GPP2 Third Generation

49、Partnership Project 2 ADDS Application Data Delivery Service BS Base StationCCPD Common Channel Packet Data CDMA Code Division Multiple Access CON_REF Connection Reference CVSE Critical Vendor/Organization Specific Extension DRS Data Ready to Send ESN Electronic Serial Number GRE Generic Routing Encapsulation IEI Information Element Identifier IMSI International Mobile Subscriber Identity IOS Interoperability Specification IP Internet ProtocolIS Interim Standard LSB Least Significant Bit MEID Mobile Equipment Identifier MS Mobile