TIA-41 000-E-8-2011 Mobile Application Parts (MAP) - Introduction (Addendum 8 to TIA-41 000-E)《移动应用部分(MAP) TIA-41 000-E的补充件8》.pdf

1、 TIA-41.000-E-8E December 2011Mobile Application Parts (MAP) - Introduction NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of produ

2、cts, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of TIA from manufacturing or selling products not conforming to suc

3、h Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accordance with the American National Standards Institute (ANSI) pate

4、nt policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems associated with its use or all applicable regulatory requirement

5、s. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Project No. 3-3590.000-RV5-AD8E, formulated under the cognizance of the TIA TR-45 Mobile (b) there is no as

6、surance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of int

7、ellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the h

8、older thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are

9、instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document o

10、r its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such ref

11、erence consists of mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs

12、policy of encouragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of

13、 a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Docu

14、ment. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERT

15、Y RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFE

16、RRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENT

17、IAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGE

18、S IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. X.S0004-000-E v9.0123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960iiRevision History Revision Date R

19、emarks(IS-41) 0 February 1988 Initial publication.(IS-41) A January 1991(IS-41) B December 1991(IS-41) C February 1996TIA/EIA-41-D December 1997 Initial ANSI publication.X.S0004-000-E v1.0X.S0004-500 590-E v1.0X.S0004-700 790-EMarch 2004 Initial publication with new part structure.X.S0004-000-E v2.0

20、 July 2005 Version 2.0.X.S0004-400-EX.S0004-600 691-EJuly 2005 Initial publication with new part structure.X.S0004-000-E v3.0 October 2005 Version 3.0.X.S0004-691-E v2.0 October 2005 Addition of Annex F: RECOVERY FROM SCCP SEGMENTATION FAILURE.X.S0004-000-E v4.0 May 2006 Version 4.0.X.S0004-200 and2

21、90-E May 2006 Initial ANSI publication with new part structure.X.S0004-000-E v5.0 January 2007 Version 5.0.X.S0004-321-E January 2007 Initial ANSI publication with new part structure.X.S0004-322-E January 2007 Initial ANSI publication with new part structure.X.S0004-323-E January 2007 Initial ANSI p

22、ublication with new part structure.X.S0004-324-E January 2007 Initial ANSI publication with new part structure.X.S0004-000-E v6.0 July 2007 Version 6.0.X.S0004-520-E v2.0 July 2007 Incorporated changes from Miscel-laneous Rev. E standards.X.S0004-540-E v2.0 July 2007 Incorporated changes from Miscel

23、-laneous Rev. E standards.X.S0004-550-E v2.0 July 2007 Incorporated changes from Miscel-laneous Rev. E standards.X.S0004-630-E v2.0 July 2007 Incorporated changes from Miscel-laneous Rev. E standards.X.S0004-640-E v2.0 July 2007 Incorporated changes from Miscel-laneous Rev. E standards.X.S0004-641-E

24、 v2.0 July 2007 Incorporated changes from Miscel-laneous Rev. E standards.X.S0004-000-E v9.0123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960iiiX.S0004-651-E v2.0 July 2007 Incorporated changes from Miscel-laneous Rev. E standards.X.S0004

25、-690-E v2.0 July 2007 Incorporated changes from Miscel-laneous Rev. E standards.X.S0004-691-E v3.0 July 2007 Incorporated changes from Miscel-laneous Rev. E standards.X.S0004-000-E v7.0 April 2008 Version 7.0.X.S0004-321-E January 2007 Initial ANSI publication with new part structure.X.S0004-322-E J

26、anuary 2007 Initial ANSI publication with new part structure.X.S0004-323-E January 2007 Initial ANSI publication with new part structure.X.S0004-324-E January 2007 Initial ANSI publication with new part structure.X.S0004-325-E April 2008 Initial ANSI publication with new part structure.X.S0004-326-E

27、 April 2008 Initial ANSI publication with new part structure.X.S0004-327-E April 2008 Initial ANSI publication with new part structure.X.S0004-328-E April 2008 Initial ANSI publication with new part structure.X.S0004-329-E April 2008 Initial ANSI publication with new part structure.X.S0004-330-E Apr

28、il 2008 Initial ANSI publication with new part structure.X.S0004-331-E April 2008 Initial ANSI publication with new part structure.X.S0004-332-E April 2008 Initial ANSI publication with new part structure.X.S0004-371-E April 2008 Initial ANSI publication with new part structure.X.S0004-630-E v3.0 Ap

29、ril 2008 Incorporated changes to section 2.1 “Idle MS Origination”.X.S0004-321-E v2.0 January 2009 Addition of sections: 1.13, 1.14, 1.15, 1.16 based on Miscellaneous Enhancements 10.0.X.S0004-321-E v2.0 January 2009 Addition of section 2.6 based on Miscellaneous Enhancements 10.0.X.S0004-328-E v2.0

30、 January 2009 Enhancement to section 2.6 based on Miscellaneous Enhancements 10.0.Revision Date RemarksX.S0004-000-E v9.0123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960ivX.S0004-333-E January 2009 Initial ANSI publication with new part

31、structure.X.S0004-334-E January 2009 Initial ANSI publication with new part structure.X.S0004-335-E January 2009 Initial ANSI publication with new part structure.X.S0004-336-E January 2009 Initial ANSI publication with new part structure.X.S0004-350-E January 2009 Initial ANSI publication with new p

32、art structure.X.S0004-372-E January 2009 Initial ANSI publication with new part structure.X.S0004-000-E v8.0 January 2009 Version 8.0.X.S0004-550-E v3.0 June 2009Modified TransactionCapabilityParameter Definition.X.S0004-000-E v9.0 June 2009 Version 9.0.Revision Date RemarksX.S0004-000-E v9.01234567

33、89101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960000 -vPart 000 - INTRODUCTION TO MAP1 COMPARISON WITH N.S0005-0 v1.0/TIA/EIA-41-D .00022 PART STRUCTURE 00082.1 OBJECTIVE .000112.2 SCOPE 000112.3 REFERENCES000112.3.1 Normative References000112.3

34、.2 Informative References000143 DEFINITIONS AND DOCUMENTATION CONVENTIONS 000163.1 DEFINITIONS000164 SYMBOLS AND ABBREVIATIONS .000284.1 DOCUMENTATION CONVENTIONS .000504.1.1 Scenario Diagram Conventions .000504.1.2 Scenario Description Conventions 000534.1.3 TCAP Package Type Diagram Conventions .0

35、00555 NETWORK REFERENCE MODEL .000575.1 NETWORK ENTITY RELATIONSHIP DIAGRAM .000576 CELLULAR INTERSYSTEM SERVICES .000596.1 GENERAL BACKGROUND AND ASSUMPTIONS .000606.2 OTA ASSUMPTIONS000616.3 NETWORK TMSI ASSUMPTIONS .000616.4 WIRELESS INTELLIGENT NETWORK ASSUMPTIONS 000626.5 SEGMENTATION AND REASS

36、EMBLY ASSUMPTIONS .000626.6 PCS MULTI-BAND SUPPORT ASSUMPTIONS000636.7 IMSI SUPPORT ASSUMPTIONS.000636.8 WIRELESS NUMBER PORTABILITY ASSUMPTIONS.000656.9 CALLING NAME PRESENTATION ASSUMPTIONS.000666.10 AUTHENTICATION ENHANCEMENT ASSUMPTIONS .000677 RESTRICTIONS .00067Part 2001 Introduction20011.1 OB

37、JECTIVE .20011.2 SCOPE 20012 BASIC INTERSYSTEM HANDOFF SCENARIOS .20022.1 Successful Handoff-Forward .20032.2 Successful Handoff-Back .20052.3 Successful Handoff-Back with Tandem viaFacilitiesDirective (Path Minimization is not supported) 2007X.S0004-000-E v9.0123456789101112131415161718192021222324

38、252627282930313233343536373839404142434445464748495051525354555657585960000 -vi2.4 Successful Handoff-Back with Tandem viaFacilitiesDirective when HandoffToThird Fails 20092.5 Successful Handoff-Forward with Tandem . 200122.6 Successful Handoff-Back with Tandem 200132.7 Successful HandoffToThird wit

39、h Path Minimization . 200142.8 Successful HandoffToThird with Tandem and Path Minimization . 200162.9 Successful Handoff-Back with Tandem via HandoffToThird when the method of Handoff-ToThird with Tandem and Path Minimization is involved . 200182.10 Successful Call Release by Served MS . 200212.11 S

40、uccessful Call Release by Other Party 200222.12 Successful Handoff-Forward of an Originating MS Awaiting Answer 200242.13 Successful Handoff-Forward of a Terminating MS While Alerting . 20026Part 290Annex A: Additional DMH Support for Intersystem Handoff in MAP (normative) .2901Part 3211 Call Delive

41、ry32111.1 CD Demand Activation or De-Activation 32111.2 CD Invocation to an Idle MS on Another MSC . 32111.3 CD Invocation to an Idle, Local MS 32141.4 CD Invocation to a Busy MS . 32151.5 CD Invocation with No Page Response or No Answer . 32161.6 CD Invocation to an Inaccessible MS . 32171.7 CD Inv

42、ocation with Intersystem Paging 32181.8 CD Invocation with Unsolicited Page Response . 321111.9 TLDN Call Arrival with Intersystem Paging 321131.10 TLDN Call Arrival with No Page Response to Intersystem Paging . 321151.11 TLDN Call Arrival with No Answer After Intersystem Paging, Call Release Initia

43、ted by Serv-ing MSC . 321161.12 TLDN Call Arrival with No Answer After Intersystem Paging, Call Release Initiated by Bor-der MSC . 32119Part 3221 INTRODUCTION .32212 Call ForwardingBusy.32212.1 CFB Variable Registration or De-Registration 32212.2 CFB Demand Activation with Courtesy Call. 32212.3 CFB

44、 Demand Activation (without Courtesy Call) or De-Activation. 32212.4 CFB Invocation 32222.5 CFB Invocation with Call Collision 3223X.S0004-000-E v9.0123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960000 -vii3 Call ForwardingDefault 32253.1

45、 CFD Variable Registration or De-Registration 32253.2 CFD Demand Activation with Courtesy Call 32253.3 CFD Demand Activation (without Courtesy Call) or De-Activation .32253.4 CFD Invocation with Busy .32253.5 CFD Invocation with Call Collision .32253.6 CFD InvocationImmediate32263.7 CFD Invocation w

46、ith No Answer or No Response to Page32274 Call ForwardingNo Answer 32294.1 CFNA Variable Registration or De-Registration32294.2 CFNA Demand Activation with Courtesy Call 32294.3 CFNA Demand Activation (without Courtesy Call) or De-Activation 32294.4 CFNA InvocationImmediate.32294.5 CFNA InvocationDe

47、layed.32295 Call ForwardingUnconditional .322115.1 CFU Variable Registration or De-Registration.322115.2 CFU Demand Activation with Courtesy Call .322115.3 CFU Demand Activation (without Courtesy Call) or De-Activation .322115.4 CFU Invocation with Alert .32212Part 3231 INTRODUCTION .32312 Call Tran

48、sfer 32313 Call Waiting.32313.1 CW Demand Activation or De-Activation32313.2 CW Demand Cancellation with Call.32323.3 CW Demand Cancellation (during call)32333.4 CW Invocation .32353.5 CW Interaction after Handoff .3237Part 3241 INTRODUCTION . 32412 Calling Number Identification Presentation 32412.1

49、 CNIP Invocation to an Idle Subscriber .32422.2 CNIP Interaction with CW .32442.3 CNIP Interaction with CW After Handoff .32452.4 CNIP Interaction with CFU .32472.5 CNIP Interaction with CFU after Handoff .3249X.S0004-000-E v9.0123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960000 -viii2.6 CNIP Invocation to a Forwarded-To Subscriber . 324103 Calling Number Identification Restriction . 324123.1 CNIR Tempor