TIA-41 000-E-9-2012 Mobile Application Part (MAP) Introduction.pdf

1、 TIA-41.000-E-9 May 2012Mobile Application Part (MAP) Introduction ANSI/TIA-41.000-E-9-2012 APPROVED: MAY 3, 2012 NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating inter

2、changeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of TIA from manufacturing or

3、selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accordance with the American Na

4、tional Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems associated with its use or

5、 all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Project No. 3-3590.000-RV5-AD9, formulated under the cognizance of th

6、e TIA TR-45 Mobile (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of thi

7、s Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to T

8、IAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any lice

9、nsing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been com

10、plied with as respects the Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommend

11、ation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any

12、 such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall no

13、t constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of com

14、pliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF

15、ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CO

16、NTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRE

17、CT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMA

18、GES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. X.S0004-000-E v10.012345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758

19、5960iiRevision History Revision Date Remarks(IS-41) 0 February 1988 Initial publication.(IS-41) A January 1991(IS-41) B December 1991(IS-41) C February 1996TIA/EIA-41-D December 1997 Initial ANSI publication.X.S0004-000-E v1.0X.S0004-500 590-E v1.0X.S0004-700 790-EMarch 2004 Initial publication with

20、 new part structure.X.S0004-000-E v2.0 July 2005 Version 2.0.X.S0004-400-EX.S0004-600 691-EJuly 2005 Initial publication with new part structure.X.S0004-000-E v3.0 October 2005 Version 3.0.X.S0004-691-E v2.0 October 2005 Addition of Annex F: RECOVERY FROM SCCP SEGMENTATION FAILURE.X.S0004-000-E v4.0

21、 May 2006 Version 4.0.X.S0004-200 and 290-E May 2006 Initial ANSI publication with new part structure.X.S0004-000-E v5.0 January 2007 Version 5.0.X.S0004-321-E January 2007 Initial ANSI publication with new part structure.X.S0004-322-E January 2007 Initial ANSI publication with new part structure.X.

22、S0004-323-E January 2007 Initial ANSI publication with new part structure.X.S0004-324-E January 2007 Initial ANSI publication with new part structure.X.S0004-000-E v6.0 July 2007 Version 6.0.X.S0004-520-E v2.0 July 2007 Incorporated changes from Miscel-laneous Rev. E standards.X.S0004-540-E v2.0 Jul

23、y 2007 Incorporated changes from Miscel-laneous Rev. E standards.X.S0004-550-E v2.0 July 2007 Incorporated changes from Miscel-laneous Rev. E standards.X.S0004-630-E v2.0 July 2007 Incorporated changes from Miscel-laneous Rev. E standards.X.S0004-640-E v2.0 July 2007 Incorporated changes from Miscel

24、-laneous Rev. E standards.X.S0004-641-E v2.0 July 2007 Incorporated changes from Miscel-laneous Rev. E standards.X.S0004-000-E v10.0123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960iiiX.S0004-651-E v2.0 July 2007 Incorporated changes from

25、 Miscel-laneous Rev. E standards.X.S0004-690-E v2.0 July 2007 Incorporated changes from Miscel-laneous Rev. E standards.X.S0004-691-E v3.0 July 2007 Incorporated changes from Miscel-laneous Rev. E standards.X.S0004-000-E v7.0 April 2008 Version 7.0.X.S0004-321-E January 2007 Initial ANSI publication

26、 with new part structure.X.S0004-322-E January 2007 Initial ANSI publication with new part structure.X.S0004-323-E January 2007 Initial ANSI publication with new part structure.X.S0004-324-E January 2007 Initial ANSI publication with new part structure.X.S0004-325-E April 2008 Initial ANSI publicati

27、on with new part structure.X.S0004-326-E April 2008 Initial ANSI publication with new part structure.X.S0004-327-E April 2008 Initial ANSI publication with new part structure.X.S0004-328-E April 2008 Initial ANSI publication with new part structure.X.S0004-329-E April 2008 Initial ANSI publication w

28、ith new part structure.X.S0004-330-E April 2008 Initial ANSI publication with new part structure.X.S0004-331-E April 2008 Initial ANSI publication with new part structure.X.S0004-332-E April 2008 Initial ANSI publication with new part structure.X.S0004-371-E April 2008 Initial ANSI publication with

29、new part structure.X.S0004-630-E v3.0 April 2008 Incorporated changes to section 2.1 “Idle MS Origination”.X.S0004-321-E v2.0 January 2009 Addition of sections: 1.13, 1.14, 1.15, 1.16 based on Miscellaneous Enhancements 10.0.X.S0004-321-E v2.0 January 2009 Addition of section 2.6 based on Miscellane

30、ous Enhancements 10.0.X.S0004-328-E v2.0 January 2009 Enhancement to section 2.6 based on Miscellaneous Enhancements 10.0.Revision Date RemarksX.S0004-000-E v10.0123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960ivX.S0004-333-E January 200

31、9 Initial ANSI publication with new part structure.X.S0004-334-E January 2009 Initial ANSI publication with new part structure.X.S0004-335-E January 2009 Initial ANSI publication with new part structure.X.S0004-336-E January 2009 Initial ANSI publication with new part structure.X.S0004-350-E January

32、 2009 Initial ANSI publication with new part structure.X.S0004-372-E January 2009 Initial ANSI publication with new part structure.X.S0004-000-E v8.0 January 2009 Version 8.0.X.S0004-550-E v3.0 January 2010 Incorporated changes to System-MyTypeCode with regards to values 43 - 46.X.S0004-000-E v9.0 J

33、anuary 2010 Version 10.0.Revision Date RemarksX.S0004-000-E v10.0123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960000 -vPart 000 - INTRODUCTION TO MAP 1 COMPARISON WITH N.S0005-0 v1.0/TIA/EIA-41-D .00022 PART STRUCTURE 00082.1 OBJECTIVE .

34、000112.2 SCOPE 000112.3 REFERENCES000112.3.1 Normative References000112.3.2 Informative References000143 DEFINITIONS AND DOCUMENTATION CONVENTIONS 000163.1 DEFINITIONS000164 SYMBOLS AND ABBREVIATIONS .000284.1 DOCUMENTATION CONVENTIONS .000504.1.1 Scenario Diagram Conventions .000504.1.2 Scenario De

35、scription Conventions 000534.1.3 TCAP Package Type Diagram Conventions .000555 NETWORK REFERENCE MODEL .000575.1 NETWORK ENTITY RELATIONSHIP DIAGRAM .000576 CELLULAR INTERSYSTEM SERVICES .000596.1 GENERAL BACKGROUND AND ASSUMPTIONS .000606.2 OTA ASSUMPTIONS000616.3 NETWORK TMSI ASSUMPTIONS .000616.4

36、 WIRELESS INTELLIGENT NETWORK ASSUMPTIONS 000626.5 SEGMENTATION AND REASSEMBLY ASSUMPTIONS .000626.6 PCS MULTI-BAND SUPPORT ASSUMPTIONS000636.7 IMSI SUPPORT ASSUMPTIONS.000636.8 WIRELESS NUMBER PORTABILITY ASSUMPTIONS.000656.9 CALLING NAME PRESENTATION ASSUMPTIONS.000666.10 AUTHENTICATION ENHANCEMEN

37、T ASSUMPTIONS .000677 RESTRICTIONS .00067Part 2001 Introduction20011.1 OBJECTIVE .20011.2 SCOPE 20012 BASIC INTERSYSTEM HANDOFF SCENARIOS .20022.1 Successful Handoff-Forward .20032.2 Successful Handoff-Back .20052.3 Successful Handoff-Back with Tandem viaFacilitiesDirective (Path Minimization is not

38、 supported) 2007X.S0004-000-E v10.0123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960000 -vi2.4 Successful Handoff-Back with Tandem viaFacilitiesDirective when HandoffToThird Fails 20092.5 Successful Handoff-Forward with Tandem . 200122.6

39、Successful Handoff-Back with Tandem 200132.7 Successful HandoffToThird with Path Minimization . 200142.8 Successful HandoffToThird with Tandem and Path Minimization . 200162.9 Successful Handoff-Back with Tandem via HandoffToThird when the method of Handoff-ToThird with Tandem and Path Minimization

40、is involved . 200182.10 Successful Call Release by Served MS . 200212.11 Successful Call Release by Other Party 200222.12 Successful Handoff-Forward of an Originating MS Awaiting Answer 200242.13 Successful Handoff-Forward of a Terminating MS While Alerting . 20026Part 290Annex A: Additional DMH Sup

41、port for Intersystem Handoff in MAP (normative) .2901Part 3211 Call Delivery32111.1 CD Demand Activation or De-Activation 32111.2 CD Invocation to an Idle MS on Another MSC . 32111.3 CD Invocation to an Idle, Local MS 32141.4 CD Invocation to a Busy MS . 32151.5 CD Invocation with No Page Response o

42、r No Answer . 32161.6 CD Invocation to an Inaccessible MS . 32171.7 CD Invocation with Intersystem Paging 32181.8 CD Invocation with Unsolicited Page Response . 321111.9 TLDN Call Arrival with Intersystem Paging 321131.10 TLDN Call Arrival with No Page Response to Intersystem Paging . 321151.11 TLDN

43、 Call Arrival with No Answer After Intersystem Paging, Call Release Initiated by Serv-ing MSC . 321161.12 TLDN Call Arrival with No Answer After Intersystem Paging, Call Release Initiated by Bor-der MSC . 32119Part 3221 INTRODUCTION .32212 Call ForwardingBusy.32212.1 CFB Variable Registration or De-

44、Registration 32212.2 CFB Demand Activation with Courtesy Call. 32212.3 CFB Demand Activation (without Courtesy Call) or De-Activation. 32212.4 CFB Invocation 32222.5 CFB Invocation with Call Collision 3223X.S0004-000-E v10.01234567891011121314151617181920212223242526272829303132333435363738394041424

45、34445464748495051525354555657585960000 -vii3 Call ForwardingDefault 32253.1 CFD Variable Registration or De-Registration 32253.2 CFD Demand Activation with Courtesy Call 32253.3 CFD Demand Activation (without Courtesy Call) or De-Activation .32253.4 CFD Invocation with Busy .32253.5 CFD Invocation w

46、ith Call Collision .32253.6 CFD InvocationImmediate32263.7 CFD Invocation with No Answer or No Response to Page32274 Call ForwardingNo Answer 32294.1 CFNA Variable Registration or De-Registration32294.2 CFNA Demand Activation with Courtesy Call 32294.3 CFNA Demand Activation (without Courtesy Call)

47、or De-Activation 32294.4 CFNA InvocationImmediate.32294.5 CFNA InvocationDelayed.32295 Call ForwardingUnconditional .322115.1 CFU Variable Registration or De-Registration.322115.2 CFU Demand Activation with Courtesy Call .322115.3 CFU Demand Activation (without Courtesy Call) or De-Activation .32211

48、5.4 CFU Invocation with Alert .32212Part 3231 INTRODUCTION .32312 Call Transfer 32313 Call Waiting.32313.1 CW Demand Activation or De-Activation32313.2 CW Demand Cancellation with Call.32323.3 CW Demand Cancellation (during call)32333.4 CW Invocation .32353.5 CW Interaction after Handoff .3237Part 3

49、241 INTRODUCTION . 32412 Calling Number Identification Presentation 32412.1 CNIP Invocation to an Idle Subscriber .32422.2 CNIP Interaction with CW .32442.3 CNIP Interaction with CW After Handoff .32452.4 CNIP Interaction with CFU .32472.5 CNIP Interaction with CFU after Handoff .3249X.S0004-000-E v10.0123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960000 -viii2.6 CNIP Invocation to a Forwarded-To Subscriber . 32