TIA-455-20-B-2004 FOTP-20 IEC 60793-1-46 Optical Fibres- Part 1- 46 Measurement Methods and Test Procedures- Monitoring of Changes in Optical Transmittance《FOTP-20 IEC 60793-1-46 光.pdf

1、TIA455.20ADOPTION NOTICETIA455.20, “Measurement Methods and Test Procedures-Monitoringof Changes in Optical Transmittance (IEC-60793-1-46 OpticalFibers Part 1-46)“, was adopted on 24-Feb-2009 for use by theDepartment of Defense (DoD). Proposed changes by DoD activitiesmust be submitted to the DoD Ad

2、opting Activity: Defense SupplyCenter, Columbus, Attn: DSCC-VAT, P. O. Box 3990,Columbus, Ohio 43218-3990. Copies of this document may bepurchased from the IHS International Inc., 15 Inverness WayEast, Englewood, Co 80112, phone 800/525-7052 orhttp:/.Reviewer Activities: Air Force - 19Army - TENavy

3、- EC, MC, SHNOTE: The activities above were interested in this document asof the date of this document. Since organizations andresponsibilities can change, you should verify the currency ofthe information above using the ASSIST Online database athttps:/assist.dla.mil.FSC 60GPCustodians:Army - CRNavy

4、 - ASAir Force - 85DLA - CCAdopting Activity:DLA - CC(Project 60GP-2009-002)Source: http:/ - Downloaded: 2013-08-14T12:26ZCheck the source to verify that this is the current version before use.TIA-455-20-B (Revision of TIA-455-20-A) May 2004FOTP-20 IEC 60793-1-46: Optical Fibres- Part 1- 46: Measure

5、ment Methods and Test Procedures- Monitoring of Changes in Optical Transmittance ANSI/TIA-455-20-B-2004 APPROVED: MAY 13, 2004 REAFFIRMED: APRIL 4, 2013 NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufactu

6、rers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or n

7、on-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by

8、 TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all saf

9、ety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Project No. ANSI/TIA-PN-455.20

10、-B, formulated under the cognizance of the TIA TR-42 Telecommunications Cabling Systems, TR-42.13 Subcommittee on Passive Optical Devices and Fiber Optic Metrology). Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION Standards and Technology Department 1320 N. Courthouse Road Arlington, VA 22201 U

11、.S.A. PRICE: Please refer to current Catalog of TIA TELECOMMUNICATIONS INDUSTRY ASSOCIATION STANDARDS AND ENGINEERING PUBLICATIONS or call IHS, USA and Canada (1-877-413-5187) International (303-397-2896) or search online at http:/www.tiaonline.org/standards/catalog/ All rights reserved Printed in U

12、.S.A. NOTICE OF COPYRIGHT This document is copyrighted by the TIA. Reproduction of these documents either in hard copy or soft copy (including posting on the web) is prohibited without copyright permission. For copyright permission to reproduce portions of this document, please contact the TIA Stand

13、ards Department or go to the TIA website (www.tiaonline.org) for details on how to request permission. Details are located at: http:/www.tiaonline.org/standards/catalog/info.cfm#copyright or Telecommunications Industry Association Technology (b) there is no assurance that the Document will be approv

14、ed by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), inclu

15、ding pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accor

16、dance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, no

17、r will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. If the Document contains

18、 one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference consists of mandatory, alternate

19、or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary dis

20、closure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or publi

21、shed pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED

22、, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AN

23、D ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR R

24、ENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS

25、OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF

26、 THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. IEC 60793-1-46 adopted as TIA-455-20-B iCONTENTS 1 Scope 1 2 Normative references 1 3 Reference test method 1 4 Apparatus 1 5 Sampling and specimens . 2 6 Procedure . 2 7 Calculations 2 8 Results 2 9 Spe

27、cification information . 3 Annex A (normative) Requirements specific to method A Change in transmittance by transmitted power 4 Annex B (normative) Requirements specific to method B Change in transmittance by backscattering. 7 Figure A.1 Measurement of change in optical transmittance using reference

28、 specimen 5 Figure A.2 Measurement of change in optical transmittance using stabilized source 5 IEC 60793-1-46 adopted as TIA-455-20-B iiIEC 60793-1-46 adopted as TIA-455-20-B iiiINTERNATIONAL ELECTROTECHNICAL COMMISSION _ OPTICAL FIBRES Part 1-46: Measurement methods and test procedures Monitoring

29、of changes in optical transmittance FOREWORD 1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote international co-operation on all que

30、stions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, the IEC publishes International Standards. Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participa

31、te in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. The IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement bet

32、ween the two organizations. 2) The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested National Committees. 3) The documents

33、 produced have the form of recommendations for international use and are published in the form of standards, technical specifications, technical reports or guides and they are accepted by the National Committees in that sense. 4) In order to promote international unification, IEC National Committees

34、 undertake to apply IEC International Standards transparently to the maximum extent possible in their national and regional standards. Any divergence between the IEC Standard and the corresponding national or regional standard shall be clearly indicated in the latter. 5) The IEC provides no marking

35、procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with one of its standards. 6) Attention is drawn to the possibility that some of the elements of this International Standard may be the subject of patent rights. The IEC shall not be

36、held responsible for identifying any or all such patent rights. International Standard IEC 60793-1-46 has been prepared by subcommittee 86A: Fibres and cables, of IEC technical committee 86: Fibre optics. This standard, together with the other standards in the IEC 60793-1-4X series, replaces the sec

37、ond edition of IEC 60793-1-4, of which it constitutes a technical revision. The text of this standard is based on the following documents: FDIS Report on voting 86A/675/FDIS 86A/699/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in

38、 the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 3. Annexes A and B form an integral part of this standard. IEC 60793-1-1 and IEC 60793-1-2 cover generic specifications. IEC 60793-1-46 adopted as TIA-455-20-B ivIEC 60793-1-4X consists of the followi

39、ng parts, under the general title: Optical fibres: Part 1-40: Measurement methods and test procedures Attenuation Part 1-41: Measurement methods and test procedures Bandwidth Part 1-42: Measurement methods and test procedures Chromatic dispersion Part 1-43: Measurement methods and test procedures Nu

40、merical aperture Part 1-44: Measurement methods and test procedures Cut-off wavelength Part 1-45: Measurement methods and test procedures Mode field diameter Part 1-46: Measurement methods and test procedures Monitoring of changes in optical transmittance Part 1-47: Measurement methods and test proc

41、edures Macrobending loss Part 1-48: Measurement methods and test procedures Under consideration Part 1-49: Measurement methods and test procedures Under consideration The committee has decided that the contents of this publication will remain unchanged until 2003. At this date, the publication will

42、be reconfirmed; withdrawn; replaced by a revised edition, or amended. IEC 60793-1-46 adopted as TIA-455-20-B vINTRODUCTION Publications in the IEC 60793-1 series concern measurement methods and test procedures as they apply to optical fibres. Within the same series several different areas are groupe

43、d, as follows: parts 1-10 to 1-19: General parts 1-20 to 1-29: Measurement methods and test procedures for dimensions parts 1-30 to 1-39: Measurement methods and test procedures for mechanical characteristics parts 1-40 to 1-49: Measurement methods and test procedures for transmission and optical ch

44、aracteristics parts 1-50 to 1-59: Measurement methods and test procedures for environmental characteristics. IEC 60793-1-46 adopted as TIA-455-20-B viIEC 60793-1-46 adopted as TIA-455-20-B 1OPTICAL FIBRES Part 1-46: Measurement methods and test procedures Monitoring of changes in optical transmittan

45、ce 1 Scope This part of IEC 60793 establishes uniform requirements for the monitoring of changes in optical transmittance, thereby assisting in the inspection of fibres and cables for commercial purposes. This standard gives two methods for monitoring the changes in optical transmittance of optical

46、fibres and cables that occur during mechanical or environmental testing, or both. It provides a monitor in the change of optical transmission characteristics arising from optical discontinuity, physical defects and modifications of the attenuation slope: method A: change in transmittance by transmit

47、ted power; method B: change in transmittance by backscattering. Methods A and B apply to the monitoring of all categories of the following fibres: class A: multimode fibres; class B: single-mode fibres. Information common to both measurements is contained in clauses 1 to 8, and information pertainin

48、g to each individual method appears in annexes A, and B respectively. 2 Normative references The following normative documents contain provisions which, through reference in this text, constitute provisions of this International Standard. For dated references, subsequent amendments to, or revisions

49、of, any of these publications do not apply. However, parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies. Members of IEC and ISO maintain registers of currently valid International Standards. IEC 60793-1-40, Optical fibres Part 1-40: Measurem