TIA-470 000-C-2003 Telecommunications Telephone Terminal Equipment Overview of Performance Standards for Analog Telephones《电信-电话终端设备-模拟电话性能标准概述》.pdf

1、 TIA DOCUMENT Telecommunications Telephone Terminal Equipment Overview of Performance Standards for Analog Telephones TIA-470.000-C (Revision of TIA-470-B) December 2003 TELECOMMUNICATIONS INDUSTRY ASSOCIATION The Telecommunications Industry Association represents the communications sector of Copyri

2、ght Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings betwe

3、en manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Publications shall not in any respect preclude any member or non

4、-member of TIA from manufacturing or selling products not conforming to such Publications. Neither shall the existence of such Documents preclude their voluntary use by non-TIA members, either domestically or internationally. TIA DOCUMENTS TIA Documents contain information deemed to be of technical

5、value to the industry, and are published at the request of the originating Committee without necessarily following the rigorous public review and resolution of comments which is a procedural part of the development of a American National Standard (ANS). Further details of the development process are

6、 available in the TIA Engineering Manual, located at http:/www.tiaonline.org/standards/sfg/engineering_manual.cfm TIA Documents shall be reviewed on a five year cycle by the formulating Committee and a decision made on whether to reaffirm, revise, withdraw, or proceed to develop an American National

7、 Standard on this subject. Suggestions for revision should be directed to: Standards & Technology Department, Telecommunications Industry Association, 2500 Wilson Boulevard, Arlington, VA 22201 U.S.A. (From Project No. 3-4350.000-RV3, formulated under the cognizance of the TIA TR-41.3 Subcommittee o

8、n Analog and Digital Wireline Terminals.) Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION 2003 Standards & Technology Department 2500 Wilson Boulevard Arlington, VA 22201 U.S.A. PRICE: Please refer to current Catalog of TIA TELECOMMUNICATIONS INDUSTRY ASSOCIATION STANDARDS AND ENGINEERING PUBLI

9、CATIONS or call Global Engineering Documents, USA and Canada (1-800-854-7179) International (303-397-7956) or search online at http:/www.tiaonline.org/standards/search_n_order.cfm All rights reserved Printed in U.S.A. Copyright Telecommunications Industry Association Provided by IHS under license wi

10、th EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-NOTICE OF DISCLAIMER AND LIMITATION OF LIABILITY The document to which this Notice is affixed (the “Document”) has been prepared by one or more Engineering Committees or Formulating Groups of the Telecommunicati

11、ons Industry Association (“TIA”). TIA is not the author of the Document contents, but publishes and claims copyright to the Document pursuant to licenses and permission granted by the authors of the contents. TIA Engineering Committees and Formulating Groups are expected to conduct their affairs in

12、accordance with the TIA Engineering Manual (“Manual”), the current and predecessor versions of which are available at http:/www.tiaonline.org/standards/sfg/engineering_manual.cfm. TIAs function is to administer the process, but not the content, of document preparation in accordance with the Manual a

13、nd, when appropriate, the policies and procedures of the American National Standards Institute (“ANSI”). TIA does not evaluate, test, verify or investigate the information, accuracy, soundness, or credibility of the contents of the Document. In publishing the Document, TIA disclaims any undertaking

14、to perform any duty owed to or for anyone. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting

15、 of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or vali

16、dity of any claims of IPR. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE D

17、ISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NON-INFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL

18、RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERE

19、D TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUS

20、INESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE C

21、ONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-PLEASE! DONT VIOLATE THE LAW! This doc

22、ument is copyrighted by the TIA and may not be reproduced without prior permission of the Telecommunications Industry Association. For information consult our website at http:/www.tiaonline.org/about/faqDetail.cfm?id=18 Organizations may obtain permission to reproduce a limited number of copies thro

23、ugh entering into a license agreement. For information, contact: Global Engineering Documents 15 Inverness Way East Englewood, CO 80112-5704 U.S.A. or call U.S.A. and Canada 1-800-854-7179, International (303) 397-7956 Copyright Telecommunications Industry Association Provided by IHS under license w

24、ith EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-FOREWORD (This foreword is not part of this standard.) This TIA Telecommunications document is produced by Working Group TR-41.3.5 of Committee TR-41. This document was developed in accordance with TIA procedur

25、al guidelines, and represents the consensus position of the Working Group and its parent Subcommittee TR-41.3, which served as the formulating group. This document is based on TIA/EIA-470-B. Suggestions for improvement of this document are welcome. They should be sent to: Telecommunications Industry

26、 Association Engineering Department Suite 300 250 Wilson Boulevard Arlington, VA 22201 Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-470.000-C i TABLE OF CONTENTS 1. OVERV

27、IEW FOR TIA-470-C STANDARDS_ 1 2. DOCUMENT STRUCTURE FOR TIA-470-C _ 2 2.1. SUB-DOCUMENT TIA-470.000-C, OVERVIEW OF PERFORMANCE STANDARDS FOR ANALOG TELEPHONES 2 2.2. SECTION TIA-470.100-C, ACOUSTIC TRANSMISSION PERFORMANCE REQUIREMENTS FOR ANALOG TELEPHONES 2 2.3. SECTION TIA-470.200-C, ELECTRICAL-

28、INTERFACE PERFORMANCE REQUIREMENTS FOR ANALOG TELEPHONES 2 2.4. SECTION TIA-470.300-C, TELEPHONY FEATURES PERFORMANCE REQUIREMENTS FOR ANALOG TELEPHONES 3 3. OTHER RELATED DOCUMENTS _ 4 3.1. (POSSIBLE FUTURE WORK) SECTION TIA-470.400-C, SPECIFIC REGULATORY REQUIREMENTS FOR ANALOG TELEPHONES. 4 3.2.

29、(POSSIBLE FUTURE WORK) SECTION TIA-470.500-C, SPECIFIC ENVIRONMENTAL RELIABILITY PERFORMANCE REQUIREMENTS FOR ANALOG TELEPHONES. 4 3.3. (POSSIBLE FUTURE WORK) SECTION TIA-470.600-C, SPECIFIC NETWORK FEATURE PERFORMANCE REQUIREMENTS FOR ANALOG TELEPHONES. 4 3.4. (POSSIBLE FUTURE WORK) SECTION TIA-470

30、.700-C, SPECIFIC SAFETY PERFORMANCE REQUIREMENTS FOR ANALOG TELEPHONES. 4 Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Copyright Telecommunications Industry Association Provi

31、ded by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-470.000-C 1 1. OVERVIEW FOR TIA-470-C STANDARDS 1 The TIA-470-C sub-documents are the result of the revision process for the TIA-470-B document. 2 Due to the size of the TIA-470-B

32、document it was deemed necessary to separate the revised standard 3 into smaller sections to allow for greater attention to detail. The TIA-470-C document is formed as a 4 series of sub-documents. TIA-470-B will be rescinded when the existing requirements in TIA-470-B 5 have been published as TIA-47

33、0-C sub-documents. 6 7 The TIA-470-C structure is provided in the “Document Structure for TIA-470-C” clause of this 8 document. The new structure provides improved document flexibility, allowing revisions of each 9 particular Section to be handled in a more efficient process. This enables additional

34、 requirements to 10 be developed and placed into the new document structure without having the entire document revised. 11 12 The TIA-470-B document format underwent significant changes. Wherever possible, specific test 13 methods have been removed in favor of more generalized methodologies and spec

35、ific schematics for 14 test circuits have been replaced with generalized circuits, specifying the test circuit performance. 15 16 Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,

36、-TIA-470.000-C 2 2. DOCUMENT STRUCTURE FOR TIA-470-C 17 The TIA-470-C document is published as a series of sub-documents each containing information 18 pertaining to a particular aspect of performance. 19 20 The sub-documents listed below in Bold Italics contain requirements that are present in TIA-

37、470-B. 21 22 2.1. SUB-DOCUMENT TIA-470.000-C, OVERVIEW OF PERFORMANCE STANDARDS FOR 23 ANALOG TELEPHONES 24 This sub-document provides an overview of the analog telephone performance standards and contains 25 a detailed listing of the sub-documents. 26 27 28 2.2. SECTION TIA-470.100-C, ACOUSTIC TRAN

38、SMISSION PERFORMANCE 29 REQUIREMENTS FOR ANALOG TELEPHONES 30 This Section contains the Acoustic Transmission Performance Specifications for Analog Telephones. 31 Section 470.100-C will eventually contain all of the following sub-documents: 32 33 TIA-470.110-C Handset Acoustic Performance Requiremen

39、ts for Analog Telephones 34 TIA-470.120-C Future work, Speakerphone Acoustic Performance Requirements for Analog 35 Telephones 36 TIA-470.130-C Future work, Headset Acoustic Performance Requirements for Analog 37 Telephones 38 39 40 2.3. SECTION TIA-470.200-C, ELECTRICAL-INTERFACE PERFORMANCE REQUIR

40、EMENTS 41 FOR ANALOG TELEPHONES 42 This Section contains the Electrical-Interface Performance Specifications for Analog Telephones. 43 Section 470.200-C may eventually contain the following sub-documents: 44 45 TIA-470.210-C Resistance and Impedance Performance Requirements for Analog Telephones 46

41、TIA-470.220-C Alerter Acoustic Output Performance Requirements for Analog Telephones 47 TIA-470.230-C Network Signaling Performance Requirements for Analog Telephones. 48 TIA-470.2x0-C Possible Future work for Network Interface, Call Supervision and DC Voltage 49 Variations Performance Requirements

42、for Analog Telephones. 50 51 Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-470.000-C 3 2.4. SECTION TIA-470.300-C, TELEPHONY FEATURES PERFORMANCE REQUIREMENTS 52 FOR ANALO

43、G TELEPHONES 53 This Section contains the Telephony Features Performance Specifications for Analog Telephones. 54 Section 470.300-C may eventually contain the following sub-documents: 55 56 TIA-470.310-C Cordless Telephone Range Measurement Procedures for Analog Telephones. 57 TIA-470.320-C Cordless

44、 Telephone Performance Requirements. 58 e.g. Minimum battery life, Out of Range Handling, etc. 59 TIA-470.3x0-C Possible Future work for Spectral Compatibility. 60 TIA-470.3x0-C Possible Future work for Multi-Line Performance Requirements. 61 TIA-470.3x0-C Possible Future work for Basic Features suc

45、h as Hold, Auto Dialing, etc. 62 TIA-470.3x0-C Possible Future work for Answering Machine Performance Requirements. 63 64 Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-470

46、.000-C 4 3. OTHER RELATED DOCUMENTS 65 3.1. (POSSIBLE FUTURE WORK) SECTION TIA-470.400-C, SPECIFIC REGULATORY 66 REQUIREMENTS FOR ANALOG TELEPHONES 67 This Section may reference specific CPE Regulatory references for Analog Telephones. These 68 requirements are in existence today in separate TIA and

47、 FCC documents. A possible Section 69 470.400-C may contain the following sub-documents: 70 71 TIA-470.4x0-C Possible future work for Regulatory Requirements. Reference latest version of 72 TIA-968 for existing requirements 73 TIA-470.4x0-C Possible future work for Hearing Aid Compatibility Performa

48、nce Requirements. 74 Reference latest version of TIA-504 for existing requirements. 75 76 77 3.2. (POSSIBLE FUTURE WORK) SECTION TIA-470.500-C, SPECIFIC ENVIRONMENTAL 78 RELIABILITY PERFORMANCE REQUIREMENTS FOR ANALOG TELEPHONES 79 This Section may reference specific Environmental requirements for Analog Telephones. These 80 requirements are in existence today in separate TIA performance documents. A possible Section 81 470.500-C may contain the following sub-documents: 82 83 TIA-470.5x0-C Possible future work for