TIA-470 120-C-2011 Telecommunications Telephone Terminal Equipment Transmission Requirements for Analog Speakerphones《远程通信电话终端设备 模拟扬声电话的传输要求》.pdf

1、 TIA-470.120-C (Revision of TIA-470-B) February 2011Telecommunications Telephone Terminal Equipment Transmission Requirements for Analog Speakerphones ANSI/TIA-470.120-C 2011 APPROVED: FEBRUARY 7, 2011 NOTICE TIA Engineering Standards and Publications are designed to serve the public interest throug

2、h eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications

3、shall not in any respect preclude any member or non-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internati

4、onally. Standards and Publications are adopted by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication.

5、This Standard does not purport to address all safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations bef

6、ore its use. (From Project No. 3-4350.120-RV3, formulated under the cognizance of the TIA TR-41 User Premises Telecommunications Requirements, TR-41.3 Subcommittee on Analog and Digital Wire line Terminals. . Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION Standards and Technology Department 25

7、00 Wilson Boulevard Arlington, VA 22201 U.S.A. PRICE: Please refer to current Catalog of TIA TELECOMMUNICATIONS INDUSTRY ASSOCIATION STANDARDS AND ENGINEERING PUBLICATIONS or call IHS, USA and Canada (1-877-413-5187) International (303-397-2896) or search online at http:/www.tiaonline.org/standards/

8、catalog/ All rights reserved Printed in U.S.A. NOTICE OF COPYRIGHT This document is copyrighted by the TIA. Reproduction of these documents either in hard copy or soft copy (including posting on the web) is prohibited without copyright permission. For copyright permission to reproduce portions of th

9、is document, please contact the TIA Standards Department or go to the TIA website (www.tiaonline.org) for details on how to request permission. Details are located at: http:/www.tiaonline.org/standards/catalog/info.cfm#copyright or Telecommunications Industry Association Technology (b) there is no a

10、ssurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of in

11、tellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the

12、holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are

13、 instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document

14、or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such re

15、ference consists of mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs

16、 policy of encouragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA o

17、f a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Doc

18、ument. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPER

19、TY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REF

20、ERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUEN

21、TIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAG

22、ES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. ANSI/TIA-470.120-C i TABLE OF CONTENTS 1 SCOPE 1 2 NORMATIVE REFERENCES. 2 3 ABBREVIATIONS, ACRONYMS, AND DEFINITIONS. 3 3.1 Abbreviations and Acronyms.3 3.2 Defi

23、nitions4 4 TECHNICAL REQUIREMENTS 6 4.1 Categories of Criteria .6 4.2 General Testing Considerations .6 4.3 Test Circuits and Setups.6 4.3.1 General Send Test Setup6 4.3.2 General receive Test Setup 7 4.3.3 Send Testing Circuit with Artificial Lines.7 4.3.4 Receive Testing Circuit with Artificial Li

24、nes8 4.3.5 DC Feed Circuit .8 4.3.6 Termination Impedance .10 4.3.7 Source Impedance10 4.3.8 Artificial Lines.10 4.4 Transmission Performance .11 4.4.1 Send Performance 11 4.4.2 Receive Performance .19 ANNEX A (NORMATIVE) NOISE CURVES 26 A.1 Send Noise Curves .26 A.2 Receive Noise Curve28 ANNEX B (N

25、ORMATIVE) CALCULATION OF LOUDNESS RATINGS 29 B.1 Send Loudness Rating (Handset): 30 B.2 Receive Loudness Rating (Handset): .30 B.3 Sidetone Masking Rating (Handset): .31 ANNEX C (NORMATIVE) ISO R-40 FREQUENCIES 33 ANNEX D (INFORMATIVE) LOSS PLAN AND LOUDNESS RATING REFERENCES AND HIERARCHY. 35 ANNEX

26、 E (INFORMATIVE) - BIBLIOGRAPHY. 36 ANNEX F (INFORMATIVE) BNR STUDY. 37 F.1 Objectives.37 F.2 Apparatus37 F.3 Procedure37 F.4 Preliminary Results 37 ANSI/TIA-470.120-C ii F.5 Recommendations 38 F.6 Table of Results38 ANNEX G (INFORMATIVE) ITEMS FOR FUTURE CONSIDERATION . 40 G.1 Voice Switching Perfo

27、rmance40 G.1.1 Single Talk Performance40 G.1.2 Double-Talk Performance40 G.2 Acoustic Echo Canceller Performance.41 G.2.1 Round Trip Echo Path Delay .41 G.2.2 TCL Single Talk 41 G.2.3 Convergence Time.41 G.2.4 TCL Temporally Weighted Coupling Loss - Double Talk41 G.2.5 Send Speech Attenuation During

28、 Double Talk41 G.2.6 Receive Speech Attenuation During Double Talk.41 G.2.7 Send Speech Front-end Clipping Time During Double Talk 41 G.2.8 Receive Speech Front-end Clipping Time During Double Talk .41 G.2.9 Acoustic Stability (TCL: Terminal Coupling Loss) 41 G.2.10 Stability Related to Low Level St

29、imulus.41 G.3 Dynamic Send Background Noise Suppression.41 G.4 Switching operation between speakerphone & handset mode .41 G.5 Send Level and Send Level Directionality.42 G.5.1 Send Level .42 G.5.2 Send Level Directionality (SLD).43 ANSI/TIA-470.120-C iii Table of Figures Figure 1 General Test Setup

30、 For Send Measurements 6 Figure 2 General Test Setup For Receive Measurements. 7 Figure 3 Test Circuit For Send Measurements . 7 Figure 4 Test Circuit For Receive Measurements. 8 Figure 5 One Possible dc Feed Circuit 9 Figure 6 Artificial Line Segment 10 Figure 7 Send Frequency Response Limits for 2

31、7 km. 12 Figure 8 Speakerphone Send LR Directionality Measurement Setup 15 Figure 9 Speakerphone Receive Level Directionality Measurement Setup 21 Figure 10 Receive Frequency Response Limits for 2.7 km 23 Figure A.1 Psophometric and C-Message noise weighting curves comparison . 27 Figure A.2 A-weig

32、hting noise weighting curve 28 Figure D.1 Hierarchical Relationship between Loudness Rating and Loss Plan Standards . 35 Figure G.1 Proposed Speakerphone Send Level Directionality Measurement Setup. 44 ANSI/TIA-470.120-C iv Table of Tables Table 1 Artificial Line Segment Component Values 10 Table 2

33、Send Frequency Response Limits 12 Table 3 Send Loudness Rating (SLR) Limits . 13 Table 4 Send Loudness Rating Directionality Limits. 14 Table 5 Limits for Send SDNR vs Frequency 16 Table 6 Limits for Send SDNR vs Level 16 Table 7 Send SDNR Stimulus Center Frequencies and Band Limits . 16 Table 8 Sen

34、d SDNR Analysis Notch Frequency Band. 17 Table 9 Speakerphone Receive Level Limits 19 Table 10 Receive Level Directionality Limits 20 Table 11 Mandatory Receive Frequency Response Limits. 22 Table 12 Limits for Receive SDNR vs Frequency 23 Table 13 Limits for Receive SDNR vs Level . 23 Table 14 Rece

35、ive SDNR Stimulus Center Frequencies and Band Limits 24 Table 15 Receive SDNR Analysis Notch Frequency Band 24 Table A.1 Psophometric weighting curve Table A.2 C-Message weighting curve 26 Table A.3 A-weighting curve . 28 Table B.1 ITU-T P.79 Tables 1, 2 and 3, Weighting factors for calculating loud

36、ness ratings . 32 Table C.1 ISO R-40, ISO R-10,1/12thOctave and 1/3rdOctave Frequencies . 33 Table C.2 ISO R-40, ISO R-10,1/12th Octave and 1/3rd Octave Frequencies (Continued) 34 Table F.1 Room noise 35 dBA User Acceptance Levels 38 Table F.2 Room noise 45 dBA User Acceptance Levels 39 Table F.3 Ro

37、om noise 55 dBA User Acceptance Levels 39 Table G.1 Proposed Speakerphone Send Level Limits. 42 Table G.2 Proposed Send Level Directionality Limits. 43 ANSI/TIA-470.120-C v FOREWORD (This foreword is not part of this Standard.) This document is a TIA Telecommunications standard produced by Working G

38、roup TR-41.3.10 of Committee TR-41. This standard was developed in accordance with TIA procedural guidelines, and represents the consensus position of the Working Group and its parent Subcommittee TR-41.3, which served as the formulating group. There are seven annexes in this Standard. Annex A, Anne

39、x B and Annex C are normative and are considered part of this Standard. Annex D, Annex E, Annex F and Annex G are informative and are not considered part of this Standard. The leadership of the TR-41.3.10 Working Group (Chair: Al Baum, Uniden) acknowledges the written contributions provided by the f

40、ollowing individuals in the development of this standard. Organization Representative TIA-470.120-C Uniden Al Baum 9 Editor AST Technology labs, Inc Don McKinnon 9 Editor Acoustics for Communications Ron Magnuson 9 Advent Instruments Dave Stenner 9 Atlinks Fred Bonhomme 9 Consultant in Electroacoust

41、ics John Bareham 9 CenturyLink Amar Ray 9 Listen Inc. Dan Foley 9 MWM Acoustics Glenn Hess 9 Nortel Miguel DeAraujo 9 Texas Instruments Tom Harley 9 VTech Communications Steve Whitesell 9 Suggestions for improvement of this standard are welcome. They should be sent to: Telecommunications Industry As

42、sociation Engineering Department Suite 300 250 Wilson Boulevard Arlington, VA 22201 ( http:/www.tiaonline.org ) ANSI/TIA-470.120-C 1 Telephone Terminal Equipment Transmission Requirements for Analog Speakerphones 1 SCOPE This standard provides speakerphone acoustic performance requirements for Custo

43、mer Premises Equipment (CPE) intended for analog connection to the Public Switched Telephone Network (PSTN). These requirements should ensure compatibility and satisfactory performance to the user in a high percentage of installations. Test measurement methods reference procedures in IEEE Std 1329 w

44、here applicable. This document proposes or references at least one measurement procedure for each technical requirement. However, these procedures are not exclusive. Any measurement procedure and equipment that can result in an identical measurement is considered valid. While the procedures may call

45、 out specific test points within the requirements, the full range of the requirements take precedent. This standard is primarily intended to be used for evaluating single user speakerphones normally used at a distance of one half meter or closer. These requirements are not intended for Cordless hand

46、set speakerphones or multi-user conference speakerphones. ANSI/TIA-470.120-C 2 2 NORMATIVE REFERENCES The following standards contain provisions, which, through reference in this text, constitute provisions of this standard. At the time of publication, the editions indicated were valid. All standard

47、s are subject to revision, and parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. ANSI and TIA maintain registers of currently valid national standards. ANSI/IEEE Std 1329-1999 Standard met

48、hod for measuring transmission performance of handsfree telephone sets ANSI/IEEE Std 269-2002 Standard methods for measuring transmission performance of analog and digital telephone sets, handsets and headsets ANSI S1.4-1983 (Reaff. 2006) American National Standard Specification for sound level mete

49、rs ANSI S1.12-1967 (Reaff. 1997) American National Standard Specifications for Laboratory Standard Microphone ITU-T Recommendation O.41 (10/94) Psophometer for use on telephone-type circuits ITU-T Recommendation P.50 (9/99) Artificial Voices ITU-T Recommendation P.51 (8/96) Artificial Mouth ITU-T Recommendation P.56 (3/93) Objective Measurement of Active Speech Level ITU-T Recommendation P.79 (11/07) Calculation of loudness ratings for telephone sets ANSI/TIA-4