TIA-492AAAD-2009 Detail Specification for 850-nm Laser- Optimized 50- Core Diameter 125- Cladding Diameter Class la Graded-Index Multimode Optical Fibers Suitable for Manufacturing.pdf

1、 TIA-492AAAD September 2009 Detail Specification for 850-nm Laser-Optimized, 50-m Core Diameter/125-m Cladding Diameter Class la Graded-Index Multimode Optical Fibers Suitable for Manufacturing OM4 Cabled Optical FiberNOTICE TIA Engineering Standards and Publications are designed to serve the public

2、 interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards a

3、nd Publications shall not in any respect preclude any member or non-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestica

4、lly or internationally. Standards and Publications are adopted by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard

5、or Publication. This Standard does not purport to address all safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory

6、 limitations before its use. (From Project No. 3-0356-1, formulated under the cognizance of the TIA TR-42 User Premises Telecommunications Cabling Infrastructure, TR-42.12 Subcommittee on Optical Fiber and Cables.) Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION Standards and Technology Departm

7、ent 2500 Wilson Boulevard Arlington, VA 22201 U.S.A. PRICE: Please refer to current Catalog of TIA TELECOMMUNICATIONS INDUSTRY ASSOCIATION STANDARDS AND ENGINEERING PUBLICATIONS or call IHS, USA and Canada (1-877-413-5187) International (303-397-2896) or search online at http:/www.tiaonline.org/stan

8、dards/catalog/ All rights reserved Printed in U.S.A. NOTICE OF COPYRIGHT This document is copyrighted by the TIA. Reproduction of these documents either in hard copy or soft copy (including posting on the web) is prohibited without copyright permission. For copyright permission to reproduce portions

9、 of this document, please contact TIA Standards Department or go to the TIA website (www.tiaonline.org) for details on how to request permission. Details are located at: http:/www.tiaonline.org/standards/catalog/info.cfm#copyright OR Telecommunications Industry Association Standards (b) there is no

10、assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of i

11、ntellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the

12、 holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which ar

13、e instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document

14、 or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such r

15、eference consists of mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIA

16、s policy of encouragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA

17、of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Do

18、cument. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPE

19、RTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE RE

20、FERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUE

21、NTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMA

22、GES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. TIA-492AAAD iDetail specification for 850-nm laser-optimized, 50-m core 1 diameter/125-m cladding diameter class Ia graded-index multimode 2 optical fibers suita

23、ble for manufacturing OM4 cabled optical fiber 3 4 Prepared by TIA TR-42.12 Subcommittee on Optical Fibers and Cables 5 6 Telecommunications Industry Association 2500 Wilson Boulevard Arlington, VA 22201-3834 Detail Specification TIA-492AAAD Electronic Components of Assessed Quality in Accordance wi

24、th Generic Specification TIA-4920000-B Blank Detail Specification TIA-492AA00-A Outline drawing: Description: class Ia graded-index multimode optical fibers Construction: Core diameter: 50 m Cladding diameter: 125.0 m NA: 0.200 Fiber composition: all-glass Coating diameter: a function of cable desig

25、n; nominal value shall be indicated on purchase order Coating composition: usually made from one or more plastic materials or compositions, to protect the fiber during manufacture, handling, and use Application(s): short reach, high bit-rate systems for telephony, distribution and local networks, ca

26、rrying data, voice and/or video services and on-premises intrabuilding and interbuilding fiber installations, including LANs, SANs, Data Centers, PBXs, video, various multiplexing uses, outside telephone cable plant use, and miscellaneous related uses. 7 TIA-492AAAD ii 8 9 10 11 12 13 14 15 16 17 18

27、 19 20 21 22 23 24 25 26 27 This page left blank. 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 TIA-492AAAD iiiContents 53 54 55 Foreword v 56 57 Introduction 1 58 59 1 Scope. 1 60 61 2 Normative references. 1 62 63 64 3 Background information . 3 65 3.1 Required specifi

28、cations. 3 66 3.2 Marking . 3 67 3.3 Numbering system 3 68 3.4 Other requirements . 3 69 3.5 Ordering information . 4 70 3.6 Additional information (not for inspection purposes). 4 71 72 4 Inspection requirements. 5 73 4.1 Qualification approval . 5 74 4.2 Quality conformance Inspection 5 75 76 5 Qu

29、ality assessment tables . 5 77 78 Annex A (normative), Quality Conformance Inspection (QCI) codes and levels 12 79 Annex B (normative), Part-number codes for multicellular attributes. 13 80 Annex C (informative), Surrogate test procedure 15 81 Annex D (informative), Material dispersion specification

30、 . 16 82 Annex E (normative), Fiber differential mode delay (DMD) and calculated effective modal 83 bandwidth (EMBc) requirements 17 84 Annex F (informative), Modal bandwidth considerations and transmitter requirements 20 85 Annex G (informative), Bandwidth nomenclature explanation . 22 86 Annex H (

31、informative), References 23 87 88 Table 1 - Dimensional specifications . 7 89 Table 2 - Mechanical specifications . 8 90 Table 3 - Optical specifications 9 91 Table 4 - Environmental specifications 11 92 Table E.1 - DMD templates 17 93 Table E.2 - DMD interval masks 17 94 Table E.3 - DMD weightings

32、19 95 Table G.1 - Bandwidth nomenclature explanation . 22 96 TIA-492AAAD iv 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 This page left blank. 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 TIA-492AAAD v141 142 Foreword

33、 143 144 145 (This Foreword is not part of this Standard.) 146 147 This document comes from TIA Project Number 3-0356, formulated under the cognizance of 148 TIA TR-42, Engineering Committee on Telecommunications Cabling Systems, and TR-42.12, 149 Subcommittee on Optical Fibers and Cables. 150 151 T

34、here are 8 annexes: Annexes A, B and E are normative; Annexes C, D, F, G and H are 152 informative. 153 154 Key Words: differential mode delay (DMD), effective modal bandwidth (EMB), calculated 155 effective modal bandwidth (EMBc), minimum calculated effective modal bandwidth (minimum 156 EMBc or mi

35、nEMBc), laser optimized, multimode, OM4, and detail specification 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 TIA-492AAAD vi 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 This page left blank. 195 196 197 198 199 200 201 202 203 204 205 2

36、06 207 208 209 210 211 212 213 214 215 216 217 218 219 TIA-492AAAD 1 Detail specification for 850-nm laser-optimized, 50-m core 220 diameter/125-m cladding diameter class Ia graded-index multimode 221 optical fibers suitable for manufacturing OM4 cabled optical fiber 222 223 224 225 226 Introduction

37、 227 228 229 This Standard enables end users and manufacturers of fiber-optic cable to specify a high 230 bandwidth optical fiber optimized for enhanced performance at 850 nm. This Specification, in 231 conjunction with Generic Specification TIA-4920000-B and Sectional Specification TIA-232 492A000-

38、A, follow the specification structure of the National Electronic Components Quality 233 Assessment System (NECQ). 234 235 236 237 1 Scope 238 239 240 This Standard applies to class Ia, graded-index, 50/125 m multimode optical fiber used as a 241 component in the manufacture of fiber-optic cable. 242

39、 243 Applications include, but are not restricted to, the following: support for short reach, high bit-rate 244 systems in telephony, distribution and local networks, carrying data, voice and/or video services 245 and on-premises intrabuilding and interbuilding fiber installations, including LANs, S

40、ANs, Data 246 Centers, PBXs, video, various multiplexing uses, outside telephone cable plant use, and 247 miscellaneous related uses. 248 249 250 251 2 Normative references 252 253 254 The following standards contain provisions that, through reference in this text, constitute 255 provisions of this

41、Standard. At the time of publication, the editions indicated were valid. All 256 standards are subject to revision, and parties to agreements based on this Standard are 257 encouraged to investigate the possibility of applying the most recent editions of the standards 258 published by them. 259 260

42、- TIA-4920000-B, Generic Specification for optical fibers; 261 262 - TIA-492A000-A, Sectional Specification for class Ia graded-index multimode optical fibers; 263 264 - TIA-492AA00-A, Blank Detail Specification for class Ia graded-index multimode optical fiber. 265 266 (Hereafter in this document,

43、the above documents will be referred to as the Generic 267 Specification, Sectional Specification, and Blank Detail Specification, respectively.) 268 TIA-492AAAD 2 269 - TIA/EIA-455-B, Standard test procedures for fiber optic fibers, cables, transducers, sensors, 270 connecting and terminating devic

44、es, and other fiber optic components, 271 272 (Specific test procedures (FOTPs) within TIA/EIA-455-B are referenced where applicable and 273 listed here.) 274 275 - FOTP-31 - Proof Testing Optical Fibers by Tension 276 277 - FOTP-48 - Measurement of Optical Fiber Cladding Diameter Using Laser-Based

45、Instruments 278 279 - FOTP-72 - Procedure for Assessing Temperature and Humidity Cycling Aging Effects on 280 Optical Characteristics of Optical Fibers 281 282 - FOTP-78 - IEC 60793-1-40 Optical Fibers Part 1-40: Measurement Methods and Text 283 Procedures - Attenuation 284 285 - FOTP-133 - IEC-6079

46、3-1-22 Optical Fibers - Part 1-22: Measurement Methods and Test 286 Procedures - Length Measurement 287 288 - FOTP-175 - IEC 60793-1-42 Optical Fibers Part 1-42: Measurement Methods and Test 289 Procedures - Chromatic Dispersion 290 291 - FOTP-176 - IEC-60793-1-20 Optical Fibers Part 1-20: Measureme

47、nt Methods and Test 292 Procedures Fiber Geometry 293 294 - FOTP-177 - IEC 60793-1-43 Optical Fibers Part 1-43: Measurement Methods and Test 295 Procedures - Numerical Aperture 296 297 - FOTP-178 - IEC 60793-1-32 Optical Fibers Part 1-32: Measurement Methods and Test 298 Procedures - Coating Stripab

48、ility 299 300 - FOTP-195 - IEC-60793-1-21 Optical Fibers Part 1 21: Measurement Methods and Test 301 Procedures Coating Geometry 302 303 - FOTP-204 - Measurement of Bandwidth on Multimode Fiber 304 305 - FOTP-220 - Differential Mode Delay Measurement of Multimode Fiber in the Time Domain 306 307 - F

49、OTP-234 IEC 60793-1-52 Optical Fibers Part 1 52: Measurement Methods and Test 308 Procedures Change of Temperature 309 TIA-492AAAD 3 310 311 312 3 Background information 313 314 315 3.1 Required specifications 316 317 This Standard takes the entire contents of clause 4 of the Sectional Specification into account. 318 The tables of this document include the minimum list of attributes specified in clause 4 of the 319 Sectional Specification.