TIA-4957 210-2013 Multi-Hop Delivery Specification of a Data Link Sub-Layer.pdf

1、 TIA-4957.210 February 2013Multi-Hop Delivery Specification of a Data Link Sub-Layer ANSI/TIA-4957.210-2013 APPROVED: FEBRUARY 12, 2013 NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchase

2、rs, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of TIA

3、from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accordanc

4、e with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems asso

5、ciated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Project No. ANSI/TIA-PN-4957.210, formulated un

6、der the cognizance of the TIA TR-51 Smart Utility Networks). Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION Standards and Technology Department 1320 N. Courthouse Road Arlington, VA 22201 U.S.A. PRICE: Please refer to current Catalog of TIA TELECOMMUNICATIONS INDUSTRY ASSOCIATION STANDARDS AND

7、 ENGINEERING PUBLICATIONS or call IHS, USA and Canada (1-877-413-5187) International (303-397-2896) or search online at http:/www.tiaonline.org/standards/catalog/ All rights reserved Printed in U.S.A. NOTICE OF COPYRIGHT This document is copyrighted by the TIA. Reproduction of these documents either

8、 in hard copy or soft copy (including posting on the web) is prohibited without copyright permission. For copyright permission to reproduce portions of this document, please contact the TIA Standards Department or go to the TIA website (www.tiaonline.org) for details on how to request permission. De

9、tails are located at: http:/www.tiaonline.org/standards/catalog/info.cfm#copyright or Telecommunications Industry Association Technology (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be am

10、ended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or inves

11、tigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investiga

12、te or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discrimina

13、tory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged i

14、n the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any du

15、ty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applic

16、ations shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Doc

17、ument. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CON

18、TENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARD

19、ING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT,

20、 ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF

21、WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. ANSI/TIA

22、-PN-4957.210 Contents 1 1 Introduction . - 1 - 2 1.1 Scope and Purpose . - 1 - 3 1.2 Release History - 1 - 4 2 References . - 2 - 5 2.1 Normative References - 2 - 6 2.2 Informative References - 2 - 7 3 Definitions . - 3 - 8 3.1 Definitions . - 3 - 9 3.2 Acronyms . - 3 - 10 4 Overview & Architecture

23、- 4 - 11 4.1 Architecture . - 4 - 12 4.2 Overview . - 5 - 13 4.3 Addressing . - 6 - 14 4.4 Protocol Identifier - 6 - 15 4.5 Multi-Hop Delivery . - 7 - 16 4.5.1 Sequence Numbers . - 7 - 17 4.5.2 Broadcast and Multicast MHD-PDUs - 7 - 18 4.5.3 Neighbors . - 7 - 19 4.5.4 Routes - 7 - 20 4.6 RAMP - 8 -

24、21 4.6.1 Service Announcement - 8 - 22 4.6.2 Service Registration . - 9 - 23 4.6.3 Route Maintenance . - 9 - 24 4.6.4 Loops - 10 - 25 4.6.5 Timers - 10 - 26 4.6.6 Link Cost - 11 - 27 4.6.7 Link Quality . - 11 - 28 5 Data Structures - 12 - 29 5.1 Representation Order . - 12 - 30 5.2 MHD-PDU Format -

25、12 - 31 5.2.1 MHD-HDR . - 12 - 32 5.2.2 MHD-Control . - 12 - 33 5.2.3 Address List . - 13 - 34 5.2.4 MHD-PDU Data. - 13 - 35 5.3 RAMP Data Elements - 14 - 36 5.3.1 Route Announcement (RTA) Data Element. - 15 - 37 5.3.2 Service Registration (SREG) Data Element . - 15 - 38 5.3.3 SREG Acknowledgement (

26、SREG-ACK) Data Element - 16 - 39 5.3.4 SREG Negative Acknowledgement (SREG-NACK) Data Element - 16 - 40 5.3.5 Route Announcement Request (RTA-REQ) Data Element . - 16 - 41 5.3.6 Route Removal (RTR) Data Element . - 16 - 42 6 Data Link Service Access Points - 18 - 43 6.1 Data Link Data Interface (D-D

27、ATA) . - 18 - 44 6.1.1 D-DATA.request - 18 - 45 6.1.2 D-DATA.confirm . - 18 - 46 6.1.3 D-DATA.indication . - 18 - 47 6.2 Data Link Layer Management Service Access Point (DLM-DATA) - 19 - 48 6.2.1 DLM-Data.request . - 19 - 49 6.2.2 DLM-DATA.confirm . - 22 - 50 6.2.3 DLM-DATA_indication. - 22 - 51 6.3

28、 Data Link Layer Parameters & Constants - 23 - 52 ANSI/TIA-PN-4957.210 iii 7 Multi-Hop Delivery Sub-Layer Functional Specification . - 24 - 1 7.1 General Purpose Data Link Procedures . - 24 - 2 7.1.1 Construct a MHD-HDR . - 24 - 3 7.2 Forwarding a MHD-PDU - 25 - 4 7.3 MHD-PDU Reception Procedure - 2

29、5 - 5 7.4 MHD-PDU Transmission Procedure . - 26 - 6 8 RAMP Protocol . - 28 - 7 8.1 Local Broadcast . - 28 - 8 8.2 Periodic RAMP Actions - 28 - 9 8.3 Route Information Update . - 29 - 10 8.4 Generation of a RTA Data Element . - 29 - 11 8.5 Generation of a RTR MHD-PDU - 29 - 12 8.6 Generation of a SRE

30、G MHD-PDU - 30 - 13 8.7 Generation of a SREG-ACK MHD-PDU - 30 - 14 8.8 Generation of a SREG-NACK MHD-PDU . - 30 - 15 8.9 Generation of a RTA-REQ MHD-PDU . - 31 - 16 8.10 RAMP Reception Procedure - 31 - 17 8.10.1 RTA Data Element . - 32 - 18 8.10.2 SREG Data Element . - 32 - 19 8.10.3 SREG_ACK Data E

31、lement - 33 - 20 8.10.4 SREG-NACK Data Element - 33 - 21 8.10.5 RTA-REQ Data Element - 34 - 22 8.10.6 RTR Data Element . - 34 - 23 8.11 RAMP Transmission Procedure - 35 - 24 8.11.1 Route Announcement . - 35 - 25 8.11.2 Route Removal . - 36 - 26 8.11.3 Service Registration . - 36 - 27 8.11.4 Service

32、Registration Response . - 36 - 28 8.11.5 Service Registration Negative Response - 37 - 29 8.11.6 Route Announcement Request . - 37 - 30 Table of Figures 31 Figure 1 Multi-Hop Delivery Service Communications Model . - 4 - 32 Figure 2: Multi-Hop Delivery Architecture - 5 - 33 Figure 3: Multi-hop Data

33、Link Delivery . - 5 - 34 Figure 4: RAMP Entities - 6 - 35 Figure 5: General MHD-PDU Format - 12 - 36 Figure 6 MHD-HDR Format - 12 - 37 Figure 7 MHD-Control Field Format . - 12 - 38 Figure 8: MHD-HDR Protocol Field Values - 13 - 39 Figure 9: Address List Field Format . - 13 - 40 Figure 10: Normal Var

34、iant MHD-PDU Data Field Format - 13 - 41 Figure 11: Vendor Specific Protocol MHD-PDU Data Format - 13 - 42 Figure 12: Data Element Format - 14 - 43 Figure 13: Data Element Type Field Values . - 14 - 44 Figure 14: Sequence Number Data Element Format - 14 - 45 Figure 15 : RAMP Data Element Format . -

35、14 - 46 Figure 16 : RAMP Data Element ID Field Values . - 15 - 47 Figure 17 : RTA Data Element Format. - 15 - 48 Figure 18 : SREG Data Element Format - 15 - 49 Figure 19: Upstream Neighbor Descriptor . - 15 - 50 Figure 20 : SREG-ACK Data Element Format . - 16 - 51 Figure 21 : SREG-NACK Data Element

36、Format - 16 - 52 Figure 22 : RTA-REQ Data Element Format . - 16 - 53 Figure 23 : RTR Data Element Format . - 16 - 54 ANSI/TIA-PN-4957.210 Figure 24: D-Data.request Parameters - 18 - 1 Figure 25: D-Data.confirm Parameters . - 18 - 2 Figure 26: D-Data.indication Parameters . - 19 - 3 Figure 27: DLM-Da

37、ta.request Parameters - 19 - 4 Figure 28: DLM-Data.request Parameters for RAMP - 20 - 5 Figure 29: RAMP RTA Request Parameters - 20 - 6 Figure 30: RAMP Route Removal Request Parameters . - 21 - 7 Figure 31: RAMP Service Registration Request Parameters - 21 - 8 Figure 32: RAMP Service Registration Re

38、sponse Request Parameters . - 21 - 9 Figure 33: RAMP Negative Service Registration Response Request Parameters - 22 - 10 Figure 34: RAMP Route Announcement Request Parameters . - 22 - 11 Figure 35: DLM-Data.confirm Parameters . - 22 - 12 Figure 36: DLM-Data.indication Parameters . - 23 - 13 Figure 3

39、7: Data Link Layer Parameters & Constants . - 23 - 14 15 ANSI/TIA-PN-4957.210 v Foreward (This foreword is not part of this standard) 1 This document is a TIA Telecommunications Standard produced by the Layer 2 Working Group of the TR51 Committee. 2 The standard was produced in accordance with TIA p

40、rocedural guidelines, and represents the consensus of the Working 3 Group and its parent committee which served as the formulating group. 4 The standard consists of 5 clauses. The normative Overview and Architecture clause describes the principles and intended 5 operation of an implementation of the

41、 standard. The normative Data Structures clause defines the encoding and data 6 structures used to represent information. The Service Access Points clause provides data and management interface 7 definitions together with a set of parameters. The Service Access Point clause is informative since it i

42、s implementation 8 specific but is referenced in the description of parts of the normative Functional Specification clause. The Functional 9 Specification clause describes procedures to be executed by an implementation of the standard and is normative. The 10 normative RAMP protocol clause describes

43、 the procedures to be used in implementing the multi-hop functions defined in 11 this specification although other protocols may also be used to provide multi-hop delivery management. 12 The TR51 Layer 2 group officers wish to acknowledge the contributions and support of the following TR51 members i

44、n the 13 preparation of this standard: 14 Organization Representatives TIA-TR51 MJLynch & Associates Mike Lynch TR51 Chair Beecher Communications Phil Beecher Layer 2 Chair Analog Devices, Inc. Jeritt Kent Participant Blind Creek Consulting Ben Rolfe Participant DTC (UK) Larry Taylor Editor Ericsson

45、 Octavio Lima ParticipantNICT Fumihide Kojima Chin Sean Sum Participant Proto6 Geoff Mulligan ParticipantSilver Spring Networks Thomas Herbst Sterling Hughes Participant SUNA John Notor Participant15 Comments, corrections or requests for enhancement should be addressed to: 16 Telecommunications Indu

46、stry Association 17 Suite 200 18 1320 N. Courthouse Road 19 Arlington, VA 22201 20 (http:/www.tiaonline.org) 21 22 ANSI/TIA-PN-4957.210 - 1 - 1 Introduction 1 1.1 Scope and Purpose 2 This document defines a Forwarding sub-layer protocol and a Routing sub-layer protocol for the Data Link layer of TR5

47、1, 3 including processes, functions, service interfaces and externally visible frame formats. The Forwarding protocol provides 4 data transfer services between non-neighboring devices. The Routing protocol provides discovery and maintenance of 5 multi-hop routes between certain non-neighboring devic

48、es. 6 1.2 Release History 7 to be included when the standard is released and updated thereafter with each release 8 Date Version Author Comments 9 ANSI/TIA-PN-4957.210 2 References 1 2.1 Normative References 2 The following are referenced in this proposal: 3 1 ANSI/TIAPN4957.200 TR51 MAC SubLayer St

49、andard 4 2.2 Informative References 5 The following are referenced in this proposal: 6 2 IEEE Standards Association Registration Authority, http:/standards.ieee.org/develop/regauth/ 7 3 IEEEStandards Association Guidelines for 64bit Global Identifier (EUI64), 8 http:/standards.ieee.org/develop/regauth/tut/eui64.pdf 9 4 ITU X.200 / ISO/IEC 74981 OSI Basic Reference Model 10 ANSI/TIA-PN-4957.210 - 3 - 3 Definitions 1 3.1 Definitions 2 Forwarding Protocol A protocol for multi-hop packet delivery 3 Hold Down Interval The interval between determining a route is no longe