TIA-4957 300-2013 Network Layer Specification.pdf

1、 TIA-4957.300 February 2013Layer 3 Standard Specification for the Smart Utility Network ANSI/TIA-4957.300-2013 APPROVED: FEBRUARY 5, 2013 NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purcha

2、sers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of TI

3、A from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accorda

4、nce with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems as

5、sociated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Project No. ANSI/TIA-PN-4957.300, formulated

6、under the cognizance of the TIA TR-51 Smart Utility Networks). Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION Standards and Technology Department 1320 N. Courthouse Road Arlington, VA 22201 U.S.A. PRICE: Please refer to current Catalog of TIA TELECOMMUNICATIONS INDUSTRY ASSOCIATION STANDARDS A

7、ND ENGINEERING PUBLICATIONS or call IHS, USA and Canada (1-877-413-5187) International (303-397-2896) or search online at http:/www.tiaonline.org/standards/catalog/ All rights reserved Printed in U.S.A. NOTICE OF COPYRIGHT This document is copyrighted by the TIA. Reproduction of these documents eith

8、er in hard copy or soft copy (including posting on the web) is prohibited without copyright permission. For copyright permission to reproduce portions of this document, please contact the TIA Standards Department or go to the TIA website (www.tiaonline.org) for details on how to request permission.

9、Details are located at: http:/www.tiaonline.org/standards/catalog/info.cfm#copyright or Telecommunications Industry Association Technology (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be

10、amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or inv

11、estigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investi

12、gate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discrimi

13、natory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged

14、 in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any

15、duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent appl

16、ications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the D

17、ocument. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE C

18、ONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGA

19、RDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIREC

20、T, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH O

21、F WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. Conten

22、ts 1 1 Introduction . - 1 - 2 1.1 Scope and Purpose . - 1 - 3 1.2 Release History - 1 - 4 2 References . - 2 - 5 2.1 Normative References - 2 - 6 2.2 Informative References - 2 - 7 3 Definitions . - 3 - 8 3.1 Definitions . - 3 - 9 3.2 Acronyms . - 3 - 10 4 Overview . - 4 - 11 4.1 Addressing . - 4 -

23、12 4.2 Network Layer Profile . - 4 - 13 4.3 Use of Data Link Data Service - 5 - 14 5 Data Structures - 6 - 15 5.1 Representation Order . - 6 - 16 5.2 Network Layer Packet Format . - 6 - 17 6 Network Layer Service - 7 - 18 6.1 Network Layer Data Interface. - 7 - 19 6.2 Protocol Identifiers - 7 - 20 6

24、.3 Network Layer Constants - 7 - 21 Table of Figures 22 Figure 1 Network Layer Profile Communications Model - 4 - 23 Figure 2: General Network Layer Packet Format . - 6 - 24 Figure 3: Protocol Identifiers - 7 - 25 Figure 4: Network Layer Constants - 7 - 26 27 ANSI/TIA-4957.300 iii Foreword (This for

25、eword is not part of this standard) 1 This document is a TIA Telecommunications Standard produced by the Layer 3 Working Group of the TR51 Committee. 2 The standard was produced in accordance with TIA procedural guidelines, and represents the consensus of the Working 3 Group and its parent committee

26、 which served as the formulating group. 4 The standard consists of 3 clauses. The normative Overview clause describes the principles and intended operation of an 5 implementation of the standard. The normative Data Structures clause defines the specific Network Layer packet structure 6 supported by

27、this standard and the normative Network Layer Service clause defines specific parameter values to be used in 7 the invocation of the TR51 Data Link service. 8 The TR51 Layer 3 group officers wish to acknowledge the contributions and support of the following TR51 members in the 9 preparation of this

28、standard: 10 Organization Representatives TIA-TR51 MJLynch 17 ANSI/TIA-PN-4957.100 (7) relaxes the requirements for packet size constraints allowing ANSI/TIA-PN-18 4957.200 (8) frames to encapsulate fragmented or non-fragmented IP packets; 19 There is a requirement to minimize packet sizes for energ

29、y and spectrum efficiency; 20 There is no IEEE registered protocol identifier for RFC 4944 (3)/RFC 6282 (4) (6LoWPAN) (see 6); 21 this specification: 22 endorses the Network Layer protocol defined in RFC 4944, as amended by RFC 6282 with: 23 Support of the 6LoWPAN dispatch type for uncompressed IPv6

30、 Headers 24 Replacement of references to IEEE 802.15.4 and its services and facilities with references to ANSI/TIA-25 PN4957.200 services and facilities and specifically references to IEE 802.15.4 MAC Address (whether 26 EUI64 or 16-bit short addresses) with ANSI/TIA-PN4957.200 MAC Addresses 27 ANSI

31、/TIA-4957.300 - 5 - 1 Defines a protocol identifier for 6LoWPAN in the reserved range for protocol identifiers defined in 2 ANSI/TIA-PN-4957.210 3 4.3 Use of Data Link Data Service 4 Invocation of the Data Link data transfer service is as defined in ANSI/TIA-PN4957.210 with: 5 The Protocol ID parame

32、ter set to c6LoWPan as defined in Figure 4. 6 7 ANSI/TIA-4957.300 5 Data Structures 1 5.1 Representation Order 2 Data representation for this specification is as defined for 6LoWPAN in RFC 4944 3. 3 5.2 Network Layer Packet Format 4 The general format of the Network Layer packet is as defined in RFC

33、 4944 and shown in Figure 2. 5 Octets: 1 40 Variable 6LoWPAN Dispatch IPv6 Header IPv6 Payload Figure 2: General Network Layer Packet Format 6 The 6LoWPAN Dispatch field is set to cIPv6Header (see 4). 7 The IPv6 Header field is set according to RFC 2460 (see 2). 8 The IPv6 Payload field is set to Ne

34、twork Layer Client data. 9 ANSI/TIA-4957.300 - 7 - 6 Network Layer Service 1 6.1 Network Layer Data Interface. 2 No specific Network Service is defined in this specification. 3 6.2 Protocol Identifiers 4 This specification updates the ANSI/TIA-PN4957.210 defined protocol identifiers as shown in Figu

35、re 3. 5 Protocol Identifier Field Value Description 0x0000 Reserved 0x0001 RAMP 0x0002 6LoWPAN 0x0003-0x02FF Reserved 0x0300-0x05FF Vendor Specific Protocol 0x600-0xFFFF IEEE Registered Protocol (see6) Figure 3: Protocol Identifiers 6 6.3 Network Layer Constants 7 Figure 4 defines constants for this

36、 specification. 8 Name Type Values Description c6LoWPAN Integer 0x0002 Protocol ID value for 6LowPAN cIPv6Header Integer 0x41 6LoWPAN Dispatch value for uncompressed IPv6 header format Figure 4: Network Layer Constants 9 10 11 ANSI/TIA-4957.300 THE TELECOMMUNICATIONS INDUSTRY ASSOCIATION TIA represe

37、nts the global information and communications technology (ICT) industry through standards development, advocacy, tradeshows, business opportunities, market intelligence and world-wide environmental regulatory analysis. Since 1924, TIA has been enhancing the business environment for broadband, wirele

38、ss, information technology, cable, satellite, and unified communications. TIA members products and services empower communications in every industry and market, including healthcare, education, security, public safety, transportation, government, the utilities. TIA is accredited by the American National Standards Institute (ANSI).