TIA-4957 400-2013 Transport Layer Specification.pdf

1、 TIA-4957.400 February 2013Layer 4 Standard Specification for the Smart Utility Network ANSI/TIA-4957.400-2013 APPROVED: FEBRUARY 12, 2013 NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purch

2、asers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of T

3、IA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accord

4、ance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems a

5、ssociated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Project No. ANSI/TIA-PN-4957.400, formulated

6、 under the cognizance of the TIA TR-51 Smart Utility Networks). Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION Standards and Technology Department 1320 N. Courthouse Road Arlington, VA 22201 U.S.A. PRICE: Please refer to current Catalog of TIA TELECOMMUNICATIONS INDUSTRY ASSOCIATION STANDARDS

7、AND ENGINEERING PUBLICATIONS or call IHS, USA and Canada (1-877-413-5187) International (303-397-2896) or search online at http:/www.tiaonline.org/standards/catalog/ All rights reserved Printed in U.S.A. NOTICE OF COPYRIGHT This document is copyrighted by the TIA. Reproduction of these documents eit

8、her in hard copy or soft copy (including posting on the web) is prohibited without copyright permission. For copyright permission to reproduce portions of this document, please contact the TIA Standards Department or go to the TIA website (www.tiaonline.org) for details on how to request permission.

9、 Details are located at: http:/www.tiaonline.org/standards/catalog/info.cfm#copyright or Telecommunications Industry Association Technology (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be

10、 amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or in

11、vestigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to invest

12、igate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discrim

13、inatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engage

14、d in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any

15、 duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent app

16、lications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the

17、Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE

18、CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REG

19、ARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRE

20、CT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH

21、OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. iiCon

22、tents 1 Introduction . - 1 - 2 1.1 Scope and Purpose . - 1 - 3 1.2 Release History - 1 - 4 2 References . - 2 - 5 2.1 Normative References - 2 - 6 2.2 Informative References - 2 - 7 3 Definitions . - 3 - 8 3.1 Definitions . - 3 - 9 3.2 Acronyms . - 3 - 10 4 Overview . - 4 - 11 4.1 Transport Layer Pr

23、ofile - 4 - 12 4.2 Use of Network Data Service - 4 - 13 4.3 Data Structures . - 4 - 14 4.4 Transport Service . - 4 - 15 Table of Figures 16 Figure 1 Transport Layer Profile Communications Model . - 4 - 17 18 19 ANSI/TIA-PN-4957.400 iii 1 Foreword (This foreword is not part of this standard) 2 This d

24、ocument is a TIA Telecommunications Standard produced by the Layer 4 Working Group of the TR51 Committee. 3 The standard was produced in accordance with TIA procedural guidelines, and represents the consensus of the Working 4 Group and its parent committee which served as the formulating group. 5 Th

25、e standard consists of 1 clause. The normative Overview clause describes the principles and intended operation of an 6 implementation of the standard. No specific data structures or functional procedures are defined and this standard is 7 therefore a profile of external standards to be used over the

26、 TR51 Network Layer. 8 The TR51 Layer 4 group officers wish to acknowledge the contributions and support of the following TR51 members in the 9 preparation of this standard: 10 Organization Representatives TIA-TR51 MJLynch & Associates Mike Lynch TR51 Chair Beecher Communications Phil Beecher Vice C

27、hair Analog Devices, Inc. Jeritt Kent Participant Blind Creek Consulting Ben Rolfe Participant DTC (UK) Larry Taylor Editor Ericsson Octavio Lima ParticipantNICT Fumihide Kojima Chin Sean Sum Participant Proto6 Geoff Mulligan ParticipantSilver Spring Networks Thomas Herbst Participant SUNA John Noto

28、r Participant11 Comments, corrections or requests for enhancement should be addressed to: 12 Telecommunications Industry Association 13 Suite 200 14 1320 N. Courthouse Road 15 Arlington, VA 22201 16 (http:/www.tiaonline.org) 17 18 ANSI/TIA-PN-4957.400 - 1 - Introduction 1 1.1 Scope and Purpose 2 Thi

29、s document defines a Transport Layer profile for ANSI/TIA-PN-4957 Smart Utility Networks 3 1.2 Release History 4 to be included when the standard is released and updated thereafter with each release 5 Date Version Author Comments 6 ANSI/TIA-PN-4957.400 - 2 -2 References 1 2.1 Normative References 2

30、The following are referenced in this proposal: 3 1 ANSI/TIAPN4957.300 TR51 Network Layer Specification 4 2 RFC 768 User Datagram Protocol, August 1980, IETF Trust 5 3 RFC 793 Transmission Control Protocol, September 1981, IETF Trust 6 2.2 Informative References 7 The following are referenced in this

31、 proposal: 8 4 ITU X.200 / ISO/IEC 74981 OSI Basic Reference Model 9 5 RFC 2460 Internet Protocol, Version 6 (IPv6) Specification, December 1998, IETF Trust 10 11 ANSI/TIA-PN-4957.400 - 3 - 3 Definitions 1 3.1 Definitions 2 None 3 3.2 Acronyms 4 IPv6 Internet Protocol Version 6 5 TCP Transmission Co

32、ntrol Protocol 6 UDP User Datagram Protocol 7 8 ANSI/TIA-PN-4957.400 - 4 -4 Overview 1 This specification uses the notions of Layer and Service as defined in 4 and defines a Transport Layer profile which uses 2 the underlying services of the ANSI/TIA-PN-4957.300 Network Service 1, as shown in Figure

33、 1. 3 4 Figure 1 Transport Layer Profile Communications Model 5 The Transport Layer profile assumes that services provided by the Network Layer include: 6 o A packet delivery service to nodes addressed by IPv6 addresses (see 5) 7 The Transport Layer profile provides a data transfer service to the Ap

34、plication Layer including: 8 o Best efforts datagram delivery 9 o Reliable data delivery 10 4.1 Transport Layer Profile 11 Noting that: 12 ANSI/TIA-PN-4957.300 defines a Network Layer profile for Smart Utility Networks 13 This specification adopts a Transport Layer Profile as defined in: 14 RFC 768

35、for unacknowledged datagram delivery 2 15 RFC 793 for acknowledged, reliable data delivery 3. 16 4.2 Use of Network Data Service 17 No specific requirements are defined in this specification for the use of the Network data service by the Transport Layer. 18 4.3 Data Structures 19 No specific data st

36、ructures or constants are defined in this specification. 20 4.4 Transport Service 21 No specific Service Access Points are defined in this specification. 22 23 24 ANSI/TIA-PN-4957.400 THE TELECOMMUNICATIONS INDUSTRY ASSOCIATION TIA represents the global information and communications technology (ICT

37、) industry through standards development, advocacy, tradeshows, business opportunities, market intelligence and world-wide environmental regulatory analysis. Since 1924, TIA has been enhancing the business environment for broadband, wireless, information technology, cable, satellite, and unified communications. TIA members products and services empower communications in every industry and market, including healthcare, education, security, public safety, transportation, government, the utilities. TIA is accredited by the American National Standards Institute (ANSI).