TIA-4957 400-A-2017 Layer 4 Specification for the Field Area Network.pdf

1、 TIA-4957.400-A (Revision of TIA-4957.400) July 2017Layer 4 Specification for the Field Area Network ANSI/TIA-4957.400-A-2017 APPROVED: APRIL 11, 2017 NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacture

2、rs and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non

3、-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by T

4、IA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safet

5、y problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. Any use of trademarks in this document

6、 are for information purposes and do not constitute an endorsement by TIA or this committee of the products or services of the company. (From Project No. ANSI/TIA-PN-4957.400-A-R1, formulated under the cognizance of the TIA TR-51 Smart Utility Networks). Published by TELECOMMUNICATIONS INDUSTRY ASSO

7、CIATION Technology and Standards Department 1320 N. Courthouse Road, Suite 200 Arlington, VA 22201 U.S.A. PRICE: Please refer to current Catalog of TIA TELECOMMUNICATIONS INDUSTRY ASSOCIATION STANDARDS AND ENGINEERING PUBLICATIONS or call IHS, USA and Canada (1-877-413-5187) International (303-397-2

8、896) or search online at http:/www.tiaonline.org/standards/catalog/ All rights reserved Printed in U.S.A. NOTICE OF COPYRIGHT This document is copyrighted by the TIA. Reproduction of these documents either in hard copy or soft copy (including posting on the web) is prohibited without copyright permi

9、ssion. For copyright permission to reproduce portions of this document, please contact the TIA Standards Department or go to the TIA website (www.tiaonline.org) for details on how to request permission. Details are located at: http:/www.tiaonline.org/standards/catalog/info.cfm#copyright or Telecommu

10、nications Industry Association Technology (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or prac

11、tice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are

12、claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to

13、discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in t

14、he Manual have been complied with as respects the Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, s

15、pecification, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Procedures for American National Standards) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or l

16、etters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see TIA Procedures for American National Standards Annex C.1.2.3) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims

17、of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise

18、 investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR

19、PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE

20、, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CO

21、NTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILIT

22、Y OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. ANSI/TIA-PN-4957.400a ii Contents 1 Introduction . 1 2 1.1 Scop

23、e and Purpose . 1 3 1.2 Release History . 1 4 2 References 2 5 2.1 IEEE 2 6 2.2 ANSI/TIA . 2 7 2.3 IETF 2 8 3 Definitions 3 9 3.1 Acronyms 3 10 4 Transport Layer Specification 4 11 4.1 Operation 4 12 4.1.1 UDP 4 13 4.1.2 TCP . 4 14 Table of Figures 15 No figures entries found. 16 ANSI/TIA-PN-4957.40

24、0a iii Foreword (This foreword is not part of this standard) 1 This document is a TIA Telecommunications Standard produced by the Working Group of the 2 TR51 Committee. The standard was produced in accordance with TIA procedural guidelines, 3 and represents the consensus of the Working Group and its

25、 parent committee which served 4 as the formulating group. 5 No specific data structures or functional procedures are defined and this standard is therefore 6 a profile of external standards to be used over the TR51 Transport Layer. This document 7 specifies the Transport Layer for Smart Utility Net

26、works, particularly in Field Area Networks. 8 The TR-51 committee officers wish to acknowledge the contributions and support of the 9 following TR-51 members in the preparation of this standard: 10 11 4957 Series Revision Contributor Company / Representing Kramarikova, Marianna TIA Sturek, Don Silve

27、r Spring Networks Lynch, Michael MJ Lynch & Associates, LLC Heile, Bob Wi-SUN Alliance Notor, John Notor Research Kent, Jeritt Analog Devices, Inc. Beecher, Phil Wi-SUN Alliance Lima, Octavio SUNA Stuebing, Gary Cisco Shah, Kunal Silver Spring Networks Kent, Jeritt Analog Devices Sum, Chin Sean Wi-S

28、UN Alliance 12 Comments, corrections or requests for enhancement should be addressed to: 13 Telecommunications Industry Association 14 Suite 200 15 1320 N. Courthouse Road 16 Arlington, VA 22201 17 (http:/www.tiaonline.org) 18 ANSI/TIA-PN-4957.400a 1 Introduction 1 1.1 Scope and Purpose 2 This docum

29、ent defines a Transport Layer profile for ANSI/TIA-PN-4957 Smart Utility 3 Networks, particularly in the extension on Field Area Networks. 4 5 1.2 Release History 6 7 Date Version Author Comments 13 Feb 2016 0v01-RC1 Chin-Sean Sum As per FANTPS 0v82 7 March 2016 0v01-RC2 Chin-Sean Sum Incorporated c

30、omments from internal review of WG3 officers 22 March 00v01-RC3 Chin-Sean Sum As per FANTPS 0v84 5 April 0v01-RC4 Chin-Sean Sum As per revisions in FANTPS 0v85 through 0v90 2 Sep. 2016 0v02-RC1 Chin-Sean Sum As per approved resolutions to comments in Letter Ballot 1 Aligned with FANTPS 1v00 21 Oct.

31、2016 0v02-RC2 Chin-Sean Sum Added list of contributors Editorial touch-up 22 April 2017 0v03-RC1 Chin-Sean Sum Editorial touch-up addressing comments from TIA Publications 11 May 2017 0v03-RC1 Chin-Sean Sum Editorial touch-up addressing comments from TIA Publications 8 ANSI/TIA-PN-4957.400a 2 2 Refe

32、rences 1 2 2.1 IEEE 3 IEEE802.15.4-2015 “IEEE Std 802.15.4-2015 IEEE Standard for Local and metropolitan 4 area networksPart 15.4: Low-Rate Wireless Personal Area 5 Networks (LR-WPANs)” 6 7 2.2 ANSI/TIA 8 ANSITIA-4957.000 “Architecture Overview for the Smart Utility Network”, 9 http:/ 10 ANSITIA-495

33、7.200 “Layer 2 Standard Specification for the Smart Utility Network”, 11 http:/ 12 ANSITIA-4957.210 “Multi-hop Delivery Specification of a Data Link Sub-Layer”, 13 http:/ 14 ANSITIA-4957.300 “Network Layer Specification”, 15 http:/ 16 ANSITIA-4957.000a “TR-51 Architecture Overview Extension on Field

34、 Area Network” 17 ANSITIA-4957.100a “TR-51 PHY Layer Specification Extension on Field Area Network” 18 ANSITIA-4957.200a “TR-51 Data Link Layer Specification Extension on Field Area 19 Network” 20 ANSITIA-4957.210a “TR-51 Multi-hop Sublayer Specification Extension on Field Area 21 Network” 22 ANSITI

35、A-4957.300a “TR-51 Network Layer Specification Extension on Field Area 23 Network” 24 ANSITIA-4957.500 “TR-51 Security Specification Extension on Field Area Network” 25 26 27 2.3 IETF 28 RFC768 “User Datagram Protocol”, http:/tools.ietf.org/search/rfc768 29 RFC793 “Transmission Control Protocol”, ht

36、tps:/www.ietf.org/rfc/rfc793.txt 30 31 32 ANSI/TIA-PN-4957.400a 3 3 Definitions 1 3.1 Acronyms 2 FAN Field Area Network. TCP Transmission Control Protocol UDP User Datagram Protocol 3 ANSI/TIA-PN-4957.400a 4 4 Transport Layer Specification 1 4.1 Operation 2 4.1.1 UDP 3 FAN nodes MUST implement the U

37、ser Datagram Protocol as defined in RFC768. 4 5 4.1.2 TCP 6 FAN nodes MAY implement the Transport Control Protocol as defined in RFC793. 7 8 9 10 THE TELECOMMUNICATIONS INDUSTRY ASSOCIATION TIA represents the global information and communications technology (ICT) industry through standards developme

38、nt, advocacy, tradeshows, business opportunities, market intelligence and world-wide environmental regulatory analysis. Since 1924, TIA has been enhancing the business environment for broadband, wireless, information technology, cable, satellite, and unified communications. TIA members products and services empower communications in every industry and market, including healthcare, education, security, public safety, transportation, government, the utilities. TIA is accredited by the American National Standards Institute (ANSI).