TIA-5012-2014 Guidelines for using cdma2000 1x Revision F M2M Features.pdf

1、 TIA-5012 September 2014Guidelines for using cdma2000 1x Revision F M2M Features NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of

2、products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of TIA from manufacturing or selling products not conforming t

3、o such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accordance with the American National Standards Institute (ANSI)

4、 patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems associated with its use or all applicable regulatory requir

5、ements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. Any use of trademarks in this document are for information purposes and do not constitute an endorsement by

6、TIA or this committee of the products or services of the company. (From Project No. TIA-PN-5012, formulated under the cognizance of the TIA TR-45 Mobile (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Do

7、cument may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no

8、 search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligat

9、ion to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable o

10、r non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“other

11、 SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Procedures for American National Standards) t

12、hen (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see TIA Procedures for American National Standards Annex C.1.2.3) of

13、 Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not en

14、force or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, A

15、NY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CO

16、NTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NO

17、T BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE

18、LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NO

19、T BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. 3GPP2 C.S0108-0 v1.0 Revision History Revision Description of Changes Date Rev 0 v1.0 Initial Publication July 2014 3GPP2 C.S0108-0 v1.0 i CONTENTS 1 1 Introduction 1-1 2 1.1 Scope . 1-1 3 1.2 Terms and Definitions . 1-1 4 1.3 References 1-2 5 1.4 Feat

20、ures Introduced in Revision F of cdma2000 1x for M2M 1-2 6 2 Features Introduced in Revision F of cdma2000 1x for M2M . 2-1 7 2.1 Using Enhanced Access Channel . 2-1 8 2.1.1 Lower Data Rate Frames for R-EACH 2-1 9 2.1.2 Association R-EACH with paging channel 2-1 10 2.1.3 Generic Access Parameter Mes

21、sage . 2-1 11 2.1.4 Selective Retransmission . 2-2 12 2.1.5 Reverse Link Underload Indicator 2-3 13 2.2 Unique Access Overload Class . 2-4 14 2.3 Device Access Priority . 2-4 15 2.4 Parallelized F-FCH and R-FCH Acquisition. 2-5 16 2.5 Direct Channel Assignment . 2-5 17 2.6 R-SCH Request during Call

22、Origination . 2-7 18 2.7 Preloaded SO33 Parameters 2-7 19 2.8 Smart Blanking for SO33 2-8 20 2.9 Gating for RC8 in R-FCH. 2-8 21 2.10 Minimized Reading of Overhead Messages . 2-9 22 2.11 Power Up Registration Timer . 2-9 23 2.12 Maximum Extended SCI 2-9 24 2.13 Extended Registration Period 2-9 25 2.

23、14 Registration with Device Characteristics 2-10 26 2.15 Highly Detectable Pilot 2-10 27 2.16 Access channel combining on physical layer 2-11 28 2.17 Selective and combined access channel reception on MAC layer . 2-11 29 3 Message Extension . 3-1 30 3.1 Extension to System Parameters Message 3-1 31

24、3.2 Extension to Access Parameters Message 3-4 32 3GPP2 C.S0108-0 v1.0 ii 3.3 Newly added Generic Access Parameters Message 3-6 1 3.4 Extension to General Page Message . 3-9 2 3.5 Extension to Extended Channel Assignment Message . 3-9 3 3.6 Newly added HDP Parameters Message 3-10 4 3.7 Newly added E

25、ACH Selective Acknowledgment Order 3-10 5 3.8 Extension to General Extension Message . 3-11 6 7 8 3GPP2 C.S0108-0 v1.0 iii This page intentionally left blank. 1 3GPP2 C.S0108-0 v1.0 v Table of Figures 1 Figure 2-1 Selective Retransmission Operation Example . 2-3 2 Figure 2-2 Mobile Terminated Connec

26、tion Request with DCA = 1 and optional parallel FL 3 and RL transmission enabled 2-6 4 Figure 2-3 Mobile Terminated Connection Request with DCA = 0 and optional parallel FL 5 and RL transmission enabled 2-6 6 Figure 2-4 Mobile Originated Connection Request with SO33_DEFAULT = 1and optional 7 paralle

27、l FL and RL transmission enabled . 2-8 8 Figure 2-5 Mobile Originated Connection Request with SO33_DEFAULT = 0 and optional 9 parallel FL and RL transmission enabled . 2-8 10 Figure 2-6 Registration by the Mobile Station . 2-10 11 Figure 2-7 Registration Requested by MSC . 2-10 12 13 3GPP2 C.S0108-0

28、 v1.0 vii Table of Tables 1 Table 1-1. Features Introduced in Revision F of cdma2000 1x for M2M . 1-3 2 Table 3-1. System Parameters Message 3-2 3 Table 3-2. Access Parameters Message . 3-5 4 Table 3-3. Generic Access Parameters Message 3-7 5 Table 3-4. General Page Message . 3-9 6 Table 3-5. Extend

29、ed Channel Assignment Message . 3-10 7 Table 3-6. HDP Parameters Message 3-10 8 Table 3-7. EACH Selective Acknowledgement Message 3-10 9 Table 3-8. General Extension Record Type 3-11 10 Table 3-9. Device Capability Information 3-11 11 Table 3-10. R-SCH Request 3-11 12 13 3GPP2 C.S0108-0 v1.0 ix FORE

30、WORD 1 (This foreword is not part of this specification) 2 This specification was prepared by Technical Specification Group AC of the Third 3 Generation Partnership Project 2 (3GPP2). This specification is the first version of the 4 document and provides the recommendations and guidelines for M2M fe

31、atures in Revision 5 F of cdma20001. 6 7 8 1 cdma2000 is the trademark for the technical nomenclature for certain specifications and standards of the Organizational Partners (OPs) of 3GPP2. Geographically (and as of the date of publication), cdma2000 is a registered trademark of the Telecommunicatio

32、ns Industry Association (TIA-USA) in the United States. 3GPP2 C.S0108-0 v1.0 x This page intentionally left blank. 1 3GPP2 C.S0108-0 v1.0 1-1 1 INTRODUCTION 1 1.1 Scope 2 This specification provides recommendations and guideline for various M2M features 3 introduced in Revision F of cdma2000 1x. 4 1

33、2 Terms and Definitions 5 Access Channel. A Reverse CDMA Channel used by mobile stations for communicating to 6 the base station. The Access Channel is used for short signaling message exchanges such 7 as call originations, responses to pages, and registrations. The Access Channel is a slotted 8 ra

34、ndom access channel. 9 Direct Channel Assignment. A MS-terminated call set-up procedure where the channel 10 assignment can be sent directly to a mobile station without receiving a page response 11 message from the mobile station. 12 Enhanced Access Channel. A reverse channel used by mobile station

35、for communicating 13 to the base station. The Enhanced Access Channel operates in the Basic Access Mode, and 14 Reservation Access Mode. It is used for transmission of short messages, such as signaling, 15 MAC messages, response to pages, and call originations. It can also be used to transmit 16 mod

36、erate-sized data packets. 17 Frame. A basic timing interval in the system. For the Sync Channel, a frame is 26.666. 18 ms long. For the Access Channel, the Paging Channel, the Forward Supplemental Code 19 Channel, and the Reverse Supplemental Code Channel, a frame is 20 ms long. For the 20 Forward S

37、upplemental Channel and the Reverse Supplemental Channel, a frame is 20, 40, 21 or 80 ms long. For the Enhanced Access Channel, the Forward Common Control Channel, 22 and the Reverse Common Control Channel, a frame is 5, 10, or 20 ms long. For the 23 Forward Fundamental Channel, Forward Dedicated Co

38、ntrol Channel, Reverse Fundamental 24 Channel, and Reverse Dedicated Control Channel, a frame is 5 or 20 ms long. For the 25 Common Assignment Channel, a frame is 5 ms long. For the Broadcast Control Channel, a 26 frame is 40 ms long; the frame may be transmitted once, twice, or four times. For the

39、27 Forward Packet Data Control Channel and the Forward Packet Data Channel, a frame could 28 be 1.25, 2.5, or 5 ms long. For the Reverse Acknowledgment Channel and the Reverse 29 Channel Quality Indicator Channel, a frame is 1.25 ms long. For the Reverse Packet Data 30 Channel, the Reverse Packet Da

40、ta Control Channel, the Reverse Request Channel, the 31 Forward Indicator Control Channel, the Forward Grant Channel, and the Forward 32 Acknowledgment Channel, a frame is 10 ms long. 33 Frame Quality Indicator. See 2. 34 MAC Layer. Entity that controls the access to and from Upper Layer Signaling,

41、Data 35 Services, and Voice Services to Physical Layer resources. 36 Physical Layer. The part of the communication protocol between the mobile station and 37 the base station that is responsible for the transmission and reception of data. The 38 physical layer in the transmitting station is presente

42、d a frame by the multiplex sublayer 39 and transforms it into an over-the-air waveform. The physical layer in the receiving station 40 3GPP2 C.S0108-0 v1.0 1-2 transforms the waveform back into a frame and presents it to the multiplex sublayer above 1 it. 2 Registration. The process by which a mobil

43、e station identifies its location and parameters 3 to a base station. 4 Selective Retransmission Mode A mode of Enhanced Access Channel operation that 5 allows the mobile station to re-transmit only the Enhanced Access Channel data frames not 6 yet received by the base station.Service Access Point.

44、Conceptual point at the interface 7 between two adjacent layers where services are provided to the upper layer and data and 8 protocol information is exchanged between layers. 9 10 1.3 References 11 The following standards are referenced in this text. At the time of publication, the editions 12 indi

45、cated were valid documents. All standards are subject to revision, and parties to 13 agreements based upon this document are encouraged to investigate the possibility of 14 applying the most recent editions of the standards indicated below. ANSI and TIA maintain 15 registers of currently valid natio

46、nal standards published within their respective 16 organization. All references are informative. 17 18 1 3GPP2: C.S0002-F, Physical Layer Standard for cdma2000 Spread Spectrum 19 Systems. 20 2 3GPP2: C.S0003-F, Medium Access Control (MAC) Standard for cdma2000 Spread 21 Spectrum Systems. 22 3 3GPP2:

47、 C.S0004-F, Signaling Link Access Control (LAC) Standard for cdma2000 23 Spread Spectrum Systems 24 4 3GPP2: C.S0005-F, Upper Layer (Layer 3) Signaling Standard for cdma2000 Spread 25 Spectrum Systems. 26 5 3GPP2: C.R1001-I v2.0, Administration of Parameter Value Assignments for 27 cdma2000 Spread S

48、pectrum Standards. 28 1.4 Features Introduced in Revision F of cdma2000 1x for M2M 29 Revision F of cdma2000 1x is mainly optimized for M2M. As the industry foresees the large 30 number of connected devices in the future, there is a strong demand to optimize both the 31 air interface and the network

49、 to accommodate this huge increase in traffic. At the same 32 time, battery consumption is also a concern, as most M2M devices are remotely located and 33 frequent changes of battery is not an option. 34 35 Therefore, Revision F of cdma2000 1x is designed with the following in mind: 36 - To reduce time on the traffic channel, use access channel as much as possible 37 - To reduce the amount of overhead in signaling 38 3GPP2 C.S0108-0 v1.0 1-3 - To reduce battery consumption 1 - To take advantage of delay tolerant characteristic of M2M devices 2 3 Various M2M relate