TIA-526-2-A-2015 Effective Transmitter Output Power Coupled into Single-Mode Fiber Optic Cable- Adoption of IEC 61280-1-1 ed 2 Part 1-1 Test Procedures for General Communication SuSin.pdf

1、 TIA-526-2-A July 2015Effective Transmitter Output Power Coupled into Single-Mode Fiber Optic Cable- Adoption of IEC 61280-1-1 ed.2 Part 1-1: Test Procedures for General Communication Subsystems- Transmitter Output Measurement for Single-Mode Optical Fibre Cable ANSI/TIA-526-2-A-2015 APPROVED: JULY

2、29, 2015 NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with mi

3、nimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such S

4、tandards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any

5、 patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establi

6、sh appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. Any use of trademarks in this document are for information purposes and do not constitute an endorsement by TIA or this committee of the products or services of the company. (From

7、Project No. SP-3-2090, formulated under the cognizance of the TIA TR-42 Telecommunications Cabling Systems, TR-42.11 Subcommittee on Optical Systems (568). Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION Technology and Standards Department 1320 N. Courthouse Road, Suite 200 Arlington, VA 22201

8、U.S.A. PRICE: Please refer to current Catalog of TIA TELECOMMUNICATIONS INDUSTRY ASSOCIATION STANDARDS AND ENGINEERING PUBLICATIONS or call IHS, USA and Canada (1-877-413-5187) International (303-397-2896) or search online at http:/www.tiaonline.org/standards/catalog/ All rights reserved Printed in

9、U.S.A. NOTICE OF COPYRIGHT This document is copyrighted by the TIA. Reproduction of these documents either in hard copy or soft copy (including posting on the web) is prohibited without copyright permission. For copyright permission to reproduce portions of this document, please contact the TIA Stan

10、dards Department or go to the TIA website (www.tiaonline.org) for details on how to request permission. Details are located at: http:/www.tiaonline.org/standards/catalog/info.cfm#copyright or Telecommunications Industry Association Technology (b) there is no assurance that the Document will be appro

11、ved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), incl

12、uding pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in acco

13、rdance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, n

14、or will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. If the Document contain

15、s one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference consists of mandatory, alternate

16、 or optional elements (as defined in the TIA Procedures for American National Standards) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of

17、voluntary disclosure (see TIA Procedures for American National Standards Annex C.1.2.3) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA o

18、f a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Doc

19、ument. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPER

20、TY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REF

21、ERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUEN

22、TIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAG

23、ES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. 2 61280-1-1 IEC:2013(E) CONTENTS FOREWORD . 3 1 Scope and object 5 2 Normative references 5 3 Apparatus . 5 3.1 Optical power meter . 5 3.2 Input signal source 5

24、3.3 Test cord . 5 3.4 Calibration . 6 4 Test sample 6 5 Procedure . 6 6 Calculation . 7 7 Test results. 7 7.1 Required information . 7 7.2 Available information . 7 Annex A (informative) Taking into account uncertainties . 8 Bibliography 9 Figure 1 Transmitter output power measurement configuration

25、. 6 61280-1-1 IEC:2013(E) 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ FIBRE OPTIC COMMUNICATION SUBSYSTEM BASIC TEST PROCEDURES Part 1-1: Test procedures for general communication subsystems Transmitter output optical power measurement for single-mode optical fibre cable FOREWORD 1) The Internatio

26、nal Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic

27、 fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; an

28、y IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standard

29、ization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has repre

30、sentation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC

31、 cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional public

32、ations. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas

33、, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents includin

34、g individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance

35、 upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the eleme

36、nts of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 61280-1-1 has been prepared by subcommittee 86C: Fibre optic systems and active devices, of IEC technical committee 86: Fibre o

37、ptics. This second edition cancels and replaces the first edition published in 1998. This second edition constitutes a technical revision. The significant technical change with respect to the previous edition is the inclusion of Annex A on how to account for uncertainties. There are editorial correc

38、tions throughout the document and updates to references. 4 61280-1-1 IEC:2013(E) The text of this standard is based on the following documents: CDV Report on voting 86C/1065/CDV 86C/1098/RVC Full information on the voting for the approval of this standard can be found in the report on voting indicat

39、ed in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts in the IEC 61280 series, published under the general title Fibre optic communication subsystem basic test procedures, can be found on the IEC website. The committee has dec

40、ided that the contents of this publication will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amend

41、ed. A bilingual version of this publication may be issued at a later date. 61280-1-1 IEC:2013(E) 5 FIBRE OPTIC COMMUNICATION SUBSYSTEM BASIC TEST PROCEDURES Part 1-1: Test procedures for general communication subsystems Transmitter output optical power measurement for single-mode optical fibre cable

42、 1 Scope and object This part of IEC 61280 applies to fibre optic general communication subsystems. The object of this part is to measure the optical power coupled from the output of a transmitter under test into single-mode optical fibre cable containing dispersion-unshifted fibre or dispersion-shi

43、fted fibre. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (includi

44、ng any amendments) applies. IEC 61300-3-35, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-35: Examinations and measurements Fibre optic connector endface visual and automated inspection IEC 61315, Calibration of fibre-optic power meters 3 App

45、aratus 3.1 Optical power meter The optical power meter shall be capable of measuring the range of power at wavelengths provided by the transmitter. The optical power meter shall have a resolution of at least 0,1 dB. The meter shall have a detecting surface of sufficient size to capture all the power

46、 coming from the fibre that is put into it. 3.2 Input signal source The input signal source is a signal generator at the appropriate signal rate of the system interface. 3.3 Test cord A length of single-mode optical fibre cable, which is known to remove cladding modes, shall be used. The optical fib

47、re (cable) shall be terminated at both ends with appropriate connectors. The ends for connection to the fibre optic transmitter and to the optical power meter shall be terminated with appropriate connector plugs. These plugs and any adapters necessary to produce the connections shall be such that th

48、e performance can be specified by the manufacturer of the equipment or the connectors. Values for the insertion loss repeatability shall be known. 6 61280-1-1 IEC:2013(E) 3.4 Calibration The optical power meter shall be configured and calibrated for the test wavelength. The optical power meters shal

49、l be calibrated in accordance with IEC 61315. The equipment used shall have a valid calibration certificate in accordance with the applicable quality system for the period over which the testing is done. Tx Terminal under test 80 mm diameter loop 2 m-10 m Sensor head Signal source Test cord Optical power meter IEC 1090/13 Figure 1 Transmitter output power measurement configuration 4 Test sample The test sample shall be a specified single-mode fibre optic transmitter, including all signal conditioning and multiplexing e