TIA-568 1-D-1-2018 Commercial Building Telecommunications Infrastructure Standard Addendum 1 Updated References Accommodation of New Media Types (Addendum to TIA-568 1-D).pdf

1、 TIA-568.1-D-1 (Addendum to TIA-568.1-D) March 2018Commercial Building Telecommunications Infrastructure Standard Addendum 1: Updated References, Accommodation of New Media Types ANSI/TIA-568.1-D-1-2018 APPROVED: MARCH 6, 2018 NOTICE TIA Engineering Standards and Publications are designed to serve t

2、he public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such St

3、andards and Publications shall not in any respect preclude any member or non-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either

4、domestically or internationally. Standards and Publications are adopted by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the

5、Standard or Publication. This Standard does not purport to address all safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of r

6、egulatory limitations before its use. Any use of trademarks in this document are for information purposes and do not constitute an endorsement by TIA or this committee of the products or services of the company. (From Standards Proposal No. ANSI/TIA-PN-568.1-D-1-R1-D2, formulated under the cognizanc

7、e of the TIA TR-42 Telecommunications Cabling Systems, TR-42.1 Subcommittee on Commercial Building Telecommunications Cabling). Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION Technology and Standards Department 1320 N. Courthouse Road, Suite 200 Arlington, VA 22201 U.S.A. PRICE: Please refer t

8、o current Catalog of TIA TELECOMMUNICATIONS INDUSTRY ASSOCIATION STANDARDS AND ENGINEERING PUBLICATIONS or call IHS, USA and Canada (1-877-413-5187) International (303-397-2896) or search online at http:/www.tiaonline.org/standards/catalog/ All rights reserved Printed in U.S.A. NOTICE OF COPYRIGHT T

9、his document is copyrighted by TIA. Reproduction of these documents either in hard copy or soft copy (including posting on the web) is prohibited without copyright permission. For copyright permission to reproduce portions of this document, please contact the TIA Standards Department or go to the TI

10、A website (www.tiaonline.org) for details on how to request permission. Details are located at: http:/www.tiaonline.org/standards/catalog/info.cfm#copyright or Telecommunications Industry Association Technology (b) there is no assurance that the Document will be approved by any Committee of TIA or a

11、ny other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents,

12、 or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA take

13、s no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge wheth

14、er proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. If the Document contains one or more Normative Referenc

15、es to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as define

16、d in the TIA Procedures for American National Standards) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see TIA Pr

17、ocedures for American National Standards Annex C.1.2.3) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essential Patent(s)

18、 or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS O

19、R IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAI

20、MS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PROD

21、UCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES

22、FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF T

23、HE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. ANSI/TIA-568.1-D-1 i Commercial Building Telecommunications Infrastructure Standard Addendum 1: Updated References, Accommodation of New Media Types Table of Contents FOREWORD . ii 1 SCOPE . 1 2

24、 MODIFICATIONS TO ANSI/TIA-568.1-D 1 2.1 General 1 2.2 Normative references (clause 2) 1 2.3 Horizontal and backbone cable terminations (subclause 8.4) . 1 2.4 Recognized media for backbone cabling (subclause 9.3) . 1 2.5 Optical fiber equipment outlet connectors (subclause 10.1) 2 2.6 Recognized me

25、dia for horizontal cabling (subclause 10.3) . 2 2.7 Work area cords (subclause 11.2) . 2 2.8 Cabling transmission performance requirements (clause 14) . 3 2.9 Bibliography (Annex A) 3 ANSI/TIA-568.1-D-1 ii FOREWORD (This foreword is not considered part of this Addendum.) This Addendum was developed

26、by TIA Subcommittee TR-42.1. Approval of this Addendum This Addendum was approved by TIA Subcommittee TR-42.1, TIA Engineering Committee TR-42, and the American National Standards Institute (ANSI). ANSI/TIA reviews standards every 5 years. At that time, standards are reaffirmed, withdrawn, or revise

27、d according to the submitted updates. Updates to be included in the next revision should be sent to the committee chair or to ANSI/TIA. Annexes There are no annexes to this Addendum. Introduction Since the time of publication of ANSI/TIA-568.1-D two documents have been published by TIA TR-42 subcomm

28、ittees which affect its content. In response, this Addendum revises references and accommodates new media types. Specifically: ANSI/TIA-568-C.2-1 specified a new balanced twisted-pair media type, category 8, specified to 2 GHz. Category 8 cabling supports 30-meter, 2 connection channels. ANSI/TIA-56

29、8.3-D is published. Cabling transmission performance and test requirements for optical fiber cabling, guidelines for maintaining optical fiber polarity, and guidelines for field testing of optical fiber cabling are now contained in this revision, eliminating the need to reference ANSI/TIA-568-C.0 fo

30、r this information. In addition, a new media type, OM5 wideband laser-optimized multimode optical fiber cabling, is specified. OM1, OM2 and OS1 cabling is no longer supported. ANSI/TIA-568.1-D-1 1 1 SCOPE This Addendum updates references and accommodates new media types introduced by ANSI/TIA-568-C.

31、2-1 and ANSI/TIA-568.3-D. 2 MODIFICATIONS TO ANSI/TIA-568.1-D 2.1 General Deleted text is shown as strikethrough. New text is shown as underline. 2.2 Normative references (clause 2) The references within clause 2, “Normative references,” shall be modified as follows: ANSI/TIA-568-C.0 2009, Generic T

32、elecommunications Cabling for Customer Premises NOTE Cabling transmission performance and test requirements for optical fiber cabling, guidelines for maintaining optical fiber polarity, and guidelines for field testing of optical fiber cabling are currently contained in ANSI/TIA-568-C.0. When ANSI/T

33、IA-568.3-D is published these requirements and guidelines will be specified in that document. ANSI/TIA-568-C.2 2009, Balanced Twisted-Pair Telecommunications Cabling and Components Standard NOTE The above reference includes the addendum, ANSI/TIA-568-C.2-1 2016. ANSI/TIA-568-C.3 2008, Optical Fiber

34、Cabling Components Standard ANSI/TIA-568.3-D 2016, Optical Fiber Cabling and Components Standard 2.3 Horizontal and backbone cable terminations (subclause 8.4) The text of 8.4, “Horizontal and backbone cable terminations,” shall be modified as follows: Horizontal and backbone building cables shall b

35、e terminated on connecting hardware that meets the requirements of ANSI/TIA-568-C.2 (for balanced twisted-pair cable) or ANSI/TIA-568-C.3ANSI/TIA-568.3-D (for optical fiber cable) as appropriate. These cable terminations shall not be relocated to implement cabling system moves, adds, and changes. 2.

36、4 Recognized media for backbone cabling (subclause 9.3) The text of 9.3, “Recognized media,” shall be modified as follows: This Standard specifies transmission media, which shall be used individually or in combination in the backbone cabling. The recognized media are: balanced twisted-pair cabling (

37、ANSI/TIA-568-C.2) category 5e, 6, 6A or 8 NOTES 1 Category 8 performance can only be achieved by channels with a maximum of 2 connections to a maximum length of 30 m (98 ft). 2 Category 8 components can be used to construct category 6A 100 m (328 ft) channels. See TIA TSB-184-A for power delivery ef

38、ficiency achievable with category 8 components. multimode optical fiber cabling (ANSI/TIA-568-C.3ANSI/TIA-568.3-D), 2-fiber (or higher) fiber count; OM4 or higher OM5 recommended ANSI/TIA-568.1-D-1 2 NOTE OM5, as used in this document, is the cable specified in ANSI/TIA-568.3-D using TIA-492AAAE mul

39、timode fibers. single-mode optical fiber cabling (ANSI/TIA-568-C.3ANSI/TIA-568.3-D) 2-fiber (or higher) fiber count broadband coaxial cabling (ANSI/TIA-568-C.4) 2.5 Optical fiber equipment outlet connectors (subclause 10.1) The text of the fifth paragraph of 10.1, “General,” shall be modified as fol

40、lows: Optical fibers at the equipment outlet shall be terminated to a duplex connector or array connector meeting the requirements of ANSI/TIA-568-C.3ANSI/TIA-568.3-D. 2.6 Recognized media for horizontal cabling (subclause 10.3) The text of 10.3, “Recognized media,” shall be modified as follows: Fou

41、r types of media are recognized and recommended for use in the horizontal cabling system. These media are: 4-pair balanced twisted-pair cabling (ANSI/TIA-568-C.2), category 5e or higher, 6, 6A or 8 NOTE To support a wide range of applications, Category 6A cabling may be required. See ANSI/TIA-568.0-

42、D. NOTES 1 To support a wide range of applications, Category 6A cabling may be required. See ANSI/TIA-568.0-D. 2 Category 8 performance can only be achieved by channels with a maximum of 2 connections to a maximum length of 30 m (98 ft). 3 Category 8 components can be used to construct category 6A 1

43、00 m (328 ft) channels. See TIA TSB-184-A for power delivery efficiency achievable with category 8 components. multimode optical fiber cabling (ANSI/TIA-568-C.3ANSI/TIA-568.3-D), 2-fiber (or higher) fiber count; OM4 or higher OM5 recommended NOTE OM5, as used in this document, is the cable specified

44、 in ANSI/TIA-568.3-D using TIA-492AAAE multimode fibers. single-mode optical fiber cabling (ANSI/TIA-568-C.3ANSI/TIA-568.3-D), 2-fiber (or higher fiber count) broadband coaxial cabling (ANSI/TIA-568-C.4) series 6 or series 11 2.7 Work area cords (subclause 11.2) The text of the first paragraph of 11

45、.2, “Work area cords,” shall be modified as follows: Work area cords used in the work area shall meet or exceed the performance requirements in ANSI/TIA-568-C.2, ANSI/TIA-568-C.3ANSI/TIA-568.3-D or ANSI/TIA-568-C.4. ANSI/TIA-568.1-D-1 3 2.8 Cabling transmission performance requirements (clause 14) T

46、he text of clause 14, “Cabling transmission performance requirements,” shall be modified as follows: The transmission performance requirements of ANSI/TIA-568-C.2, ANSI/TIA-568.0-C ANSI/TIA-568.3-D and ANSI/TIA-568-C.4 shall be met. 2.9 Bibliography (Annex A) The references within (informative) anne

47、x A shall be modified to include: TIA TSB-184-A 2017, Guidelines for Supporting Power Delivery Over Balanced Twisted-Pair Cabling THE TELECOMMUNICATIONS INDUSTRY ASSOCIATION TIA represents the global information and communications technology (ICT) industry through standards development, advocacy, tr

48、adeshows, business opportunities, market intelligence and world-wide environmental regulatory analysis. Since 1924, TIA has been enhancing the business environment for broadband, wireless, information technology, cable, satellite, and unified communications. TIA members products and services empower communications in every industry and market, including healthcare, education, security, public safety, transportation, government, the utilities. TIA is accredited by the American National Standards Institute (ANSI).