TIA-568-B 1-2-2003 Commercial Building Telecommunications Cabling Standard Part 1 General Requirements Addendum 2 - Grounding and Bonding Specifications for Screened Balanced Twisty .pdf

1、 TIA STANDARD ANSI/TIA-568-B.1-2-2003 Approved: February 25, 2003 Commercial Building Telecommunications Cabling Standard Part 1: General Requirements Addendum 2 Grounding and Bonding Specifications for Screened Balanced Twisted-Pair Horizontal Cabling TIA-568-B.1-2 (Addendum No. 2 to TIA/EIA-568-B.

2、1) FEBRUARY 2003 TELECOMMUNICATIONS INDUSTRY ASSOCIATION Representing the telecommunications industry in association with the Electronic Industries Alliance Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted w

3、ithout license from IHS-,-,-NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting an

4、d obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the

5、existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume a

6、ny liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. Further details of the development process are available in the TIA Engineering Manual, located at http:/www.tiaonline.org/standards/sfg/engineering_manual.cfm This Standard

7、does not purport to address all safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (

8、From Standards Proposal No. 3-4425-AD2-A, formulated under the cognizance of the TIA TR-42.1 Subcommittee on Commercial Building Telecommunications Cabling.) Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION 2003 Standards and Technology Department 2500 Wilson Boulevard Arlington, VA 22201 U.S.A.

9、 PRICE: Please refer to current Catalog of TIA TELECOMMUNICATIONS INDUSTRY ASSOCIATION STANDARDS AND ENGINEERING PUBLICATIONS or call Global Engineering Documents, USA and Canada (1-800-854-7179) International (303-397-7956) or search online at http:/www.tiaonline.org/standards/search_n_order.cfm Al

10、l rights reserved Printed in U.S.A. Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-NOTICE OF DISCLAIMER AND LIMITATION OF LIABILITY The document to which this Notice is affixed

11、 (the “Document”) has been prepared by one or more Engineering Committees or Formulating Groups of the Telecommunications Industry Association (“TIA”). TIA is not the author of the Document contents, but publishes and claims copyright to the Document pursuant to licenses and permission granted by th

12、e authors of the contents. TIA Engineering Committees and Formulating Groups are expected to conduct their affairs in accordance with the TIA Engineering Manual (“Manual”), the current and predecessor versions of which are available at http:/www.tiaonline.org/standards/sfg/engineering_manual.cfm. TI

13、As function is to administer the process, but not the content, of document preparation in accordance with the Manual and, when appropriate, the policies and procedures of the American National Standards Institute (“ANSI”). TIA does not evaluate, test, verify or investigate the information, accuracy,

14、 soundness, or credibility of the contents of the Document. In publishing the Document, TIA disclaims any undertaking to perform any duty owed to or for anyone. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued p

15、atents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. T

16、IA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, design

17、s or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTA

18、BILITY AND ITS NON-INFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE

19、 SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WI

20、THOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVI

21、SED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. Copyright Telecommunications Industry Association Provided by IHS under license with EIANot

22、 for ResaleNo reproduction or networking permitted without license from IHS-,-,-PLEASE! DONT VIOLATE THE LAW! This document is copyrighted by the TIA and may not be reproduced without prior permission of the Telecommunications Industry Association. For information consult our website at http:/www.ti

23、aonline.org/about/faqDetail.cfm?id=18 Organizations may obtain permission to reproduce a limited number of copies through entering into a license agreement. For information, contact: Global Engineering Documents 15 Inverness Way East Englewood, CO 80112-5704 U.S.A. or call U.S.A. and Canada 1-800-85

24、4-7179, International (303) 397-7956 Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-568-B.1-2 GROUNDING AND BONDING SPECIFICATIONS FOR SCREENED BALANCED TWISTED-PAIR HORIZO

25、NTAL CABLING TABLE OF CONTENTS 1 INTRODUCTION.1 2 PURPOSE AND SCOPE.1 3 NORMATIVE REFERENCES .1 4 DEFINITIONS, ACRONYMS parties to agreements based on this Standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated. ANSI and TIA maintain re

26、gisters of currently valid national standards published by them. ANSI/TIA/EIA-568-B.1, Commercial Building Telecommunications Standard Part 1: General Requirements, 2001 ANSI/TIA/EIA-568-B.2, Commercial Building Telecommunications Cabling Standard Part 2: Balanced Twisted-Pair Cabling Components, 20

27、01 ANSI/TIA/EIA-569-A, Commercial Building Standard for Telecommunications Pathways and Spaces, 1998 ANSI/TIA/EIA-606-A, Administration Standard for the Telecommunications Infrastructure of Commercial Buildings, 2002 ANSI/TIA/EIA-J-STD-607-A, Commercial Building Grounding (Earthing) & Bonding Requir

28、ements for Telecommunications standard, 2002 4 DEFINITIONS, ACRONYMS & ABBREVIATIONS 4.1 Definitions The generic definitions in this section have been formulated for use by the entire family of telecommunications infrastructure standards. As such, the definitions do not contain mandatory requirement

29、s of the Standard. Specific requirements are found in the normative sections of this Standard. bonding: The permanent joining of metallic parts to form an electrically conductive path that will ensure electrical continuity and the capacity to conduct safely any current likely to be imposed. bonding

30、conductor: A conductor that interconnects the screened balanced twisted-pair horizontal cabling infrastructure to the telecommunications grounding busbar. earthing: See grounding. effectively grounded: For a definition see the NEC. ground: A conducting connection, whether intentional or accidental,

31、between an electrical circuit (e.g., telecommunications) or equipment and the earth, or to some conducting body that serves in place of earth. grounding: The act of creating a conducting connection, whether intentional or accidental, between an electrical circuit (e.g., telecommunications) or equipm

32、ent and the earth, or to some conducting body that serves in place of earth. 1 Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-568-B.1-2 telecommunications grounding busbar:

33、 A common point of connection for telecommunications system and equipment bonding to ground, and located in the telecommunications room or equipment room. 4.2 Acronyms and abbreviations EMC Electromagnetic compatibility NRTL Nationally recognized testing laboratory TGB Telecommunications grounding b

34、usbar TO Telecommunications outlet 5 GROUNDING CONSIDERATIONS 5.1 Corrections and revisions to ANSI/TIA/EIA-568-B.1 The purpose of this clause is to revise clause 4.6 of ANSI/TIA/EIA-568-B.1. These revisions are identified in the following text with additions shown in bold italics and deletions show

35、n as strikeout. 4.6 Grounding considerations Grounding systems are an integral part of the signal or telecommunications cabling system that they support. In addition to helping protect personnel and equipment from hazardous voltages, a proper grounding system may improve the EMC performance of the r

36、educe electromagnetic interference (EMI) to and from the telecommunications cabling system. Improper grounding can produce induced voltages and those voltages can disrupt other telecommunications circuits. Grounding and bonding shall meet the requirements and practices of applicable authorities or c

37、odes. In addition, telecommunications grounding/bonding shall conform to ANSI/TIA/EIA-J-STD-607-A ANSI/TIA/EIA-607 requirements. The screen shield of ScTP cables shall be bonded through a conducting path to the telecommunications grounding busbar (TGB) in the telecommunications room (see subclause 1

38、0.2.5). Grounding of equipment at the work area is usually accomplished through the ground conductor of the equipment power connection. If present, screen Shield connections to at the work area equipment shall be are accomplished through the screen of an ScTP work area patch cord extending from the

39、TO to the equipment. At the work area end of the horizontal cabling, the voltage measured between the screen shield and the ground wire of the electrical outlet used to provide supply power to the workstation equipment shall not exceed 1.0 V rms RMS and shall not exceed 1.0 V dc. The cause of any hi

40、gher voltage should be removed before using the cable. The screen of ScTP connecting hardware shall be bonded to the TGB in the telecommunications room according to the requirements given in normative annex A of this Standard. The horizontal cable screen shall be bonded via a screen termination to t

41、he connecting hardware screen termination. The connecting hardware screen termination is controlled by component specifications and shall be verified to ensure that all applicable requirements are met. 2Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for R

42、esaleNo reproduction or networking permitted without license from IHS-,-,-TIA-568-B.1-2 ANNEX A (NORMATIVE) GROUNDING (EARTHING) AND BONDING OF SCREENED BALANCED TWISTED-PAIR HORIZONTAL CABLING A.1 General The basic components and requirements for grounding (earthing) and bonding specified herein sh

43、all be followed for every area of a building wherein screened balanced twisted-pair horizontal cabling is installed. The grounding (earthing) and bonding infrastructure for installed screened balanced twisted-pair horizontal cables are also specified herein. The grounding (earthing) and bonding infr

44、astructure for installed screened backbone cables is specified in ANSI/TIA/EIA-J-STD-607-A. In all cases, applicable electrical code requirements shall be satisfied. A.2 Overview of the horizontal cabling grounding (earthing) and bonding infrastructure The screened balanced twisted-pair horizontal c

45、able grounding (earthing) and bonding infrastructure includes four major components as described in A.3: a) Connecting hardware screen termination conductor b) Bonding conductor c) Connecting hardware screen termination d) Telecommunications grounding busbar (TGB) These screened balanced twisted-pai

46、r horizontal cabling grounding (earthing) and bonding components are intended to work in conjunction with telecommunications pathways and spaces (ANSI/EIA/TIA-569-A) and administration (ANSI/TIA/EIA-606-A), including: a) Telecommunications equipment room b) Telecommunications room (TR) c) Telecommun

47、ications labeling and record keeping A.3 Screened balanced twisted-pair horizontal cabling grounding (earthing) and bonding infrastructure components This clause describes the characteristics of the major components of the horizontal cabling grounding (earthing) and bonding infrastructure. A.3.1 Con

48、necting hardware screen termination conductor The screen of all installed screened balanced twisted-pair horizontal cable shall be fitted at each end with screened connecting hardware. The connecting hardware screen termination conductor (see figure A.1) shall enable connections between the cable sc

49、reen extending from one side of the connecting hardware to the cable screen extending from the other side of the connecting hardware. All connecting hardware and cable used in screened balanced twisted-pair horizontal cabling shall comply with annex K of ANSI/TIA/EIA-568-B.2. Individual connecting hardware screen termination conductors may be interconnected in a common connecting hardware screen termination conductor. Connections from the common connecting hardware scree