TIA-568-C 2-2009 Balanced Twisted-Pair Telecommunications Cabling and Components Standards《对称双绞合线电信电缆敷设和部件标准》.pdf

1、ANSlfll A-568-C.2-2009 APPROVED: AUOUST 1 1,2009 TIA STANDARD Balanced Twisted-Pair Telecommunications Cabling and Components Standards TELrnMU NleAT161(S INDUSTRY ASSOCIATION August 2009 NOTICE TLA Engineering Standards and Publications are designed to serve the public interest through eliminating

2、misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in a

3、ny respect preclude any member or non-memh of TIA from manufacturing or s tlling products not conforming to such Standards and Publications, Neither shall the existence of such Standards and Publications preclude their voZmtary use by Non-TM membem, either domestically or internationally. Standards

4、and Publications are adopted by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA do= not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard docs

5、not purport to address all safety problems associated with its use or all applicable regulatory requirements. It is the mponsibility of the mer of this Standard to establish appropriate safety and health pmctices and to dehmhe he applicability of regulatory limitations before its use. (From Standard

6、s Proposal No. 3-4426-RV3-B-2, formulated under the cognizance of the TIA TR42 User Premises Telacommunications Cabling Inhtruc ture, TR-42.7 Subcommittee on Telecommunications Copper Cabling Systems.) TELECOMMUNICATIONS INDUSTRY ASSOCIATION Standards and Technology Department 2500 Wilson Boulevard

7、Arlington, VA 22201 U.S.A. PRICE: Please refer to current Catalog of TIA TELECOMMUNICATIONS INDUSTRY ASSOCIATION STANDARDS AND ENGINEERING PUBLICATIONS or cnll IHS, USA and Canada (1-87741315187) International (303-397-2896) or search online at http:/lwww,tiaonline.orstandards/catalopl All rights re

8、served Printed in U.S,A. NOTICE OF COPYRIGHT This document is copyrighted by the TIA. Reproduction of these documents either in hard copy or soft copy (including posting on the web) b prohibited without copyright permission. For copyright permission to reproduce portions of this document, please con

9、tact TLA Standards Departmeat or go to the TLA website Iwww,tiaonline,ag) for details on how to request permission. Details are located at: /,ds/cata10/0.crrht Telecommunications Industry Association Standards (b) there is no assurance that the Document will be approved by any Committee of TIA or an

10、y other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents,

11、or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes

12、 no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whethe

13、r proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. TIA does not enforce or monitor compliance with the cont

14、ents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCU

15、RACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NON-INFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR W

16、ARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. ANSI/TIA-568-C.2 ii TIA SHALL NOT BE LIABLE FOR ANY

17、AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED

18、 UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TI

19、A WITHOUT SUCH LIMITATIONS NOTICE TIA staff to insert applicable text here. ANSI/TIA-568-C.2 i Balanced Twisted-Pair Telecommunications Cabling and Components Standard TABLE OF CONTENTS 1 SCOPE 1 2 NORMATIVE AND INFORMATIVE REFERENCES . 1 3 DEFINITIONS, ABBREVIATIONS AND ACRONYMS, UNITS OF MEASURE 3

20、 3.1 General 3 3.2 Definitions 3 3.3 Acronyms and abbreviations 5 3.4 Units of measure 5 3.5 Variables 6 4 GENERAL 7 4.1 Backward compatibility and interoperability . 7 4.2 Recognized categories. 7 5 MECHANICAL REQUIREMENTS . 8 5.1 Channel mechanical performance . 8 5.2 Permanent link mechanical per

21、formance. 8 5.3 Horizontal cable mechanical performance . 8 5.3.1 Insulated conductor. 8 5.3.2 Pair assembly . 8 5.3.3 Insulated conductor color code . 8 5.3.4 Cable diameter 9 5.3.5 Breaking strength 9 5.3.6 Cold bend radius . 9 5.3.7 Performance marking . 9 5.3.8 Core wrap . 9 5.3.9 Core shield (s

22、creened only) 9 5.3.10 Dielectric strength (screened only) . 9 5.4 Bundled and hybrid cable mechanical performance 9 5.5 Cord cable mechanical performance . 10 5.5.1 General . 10 5.5.2 Cord cable flex life (screened only) 10 5.6 Backbone cable mechanical performance . 10 5.6.1 Insulated conductor. 1

23、0 5.6.2 Pair assembly . 10 5.6.3 Insulated conductor color code . 10 5.6.4 Core assembly 11 5.6.5 Core shield 11 5.6.6 Jacket 11 5.6.7 Performance marking . 11 5.6.8 Dielectric strength (screened only) . 11 5.6.9 Core shield resistance 11 5.7 Connecting hardware mechanical performance 11 5.7.1 Envir

24、onmental compatibility 11 5.7.2 Mounting . 11 5.7.3 Mechanical termination density 12 5.7.4 Design . 12 5.7.5 Work area telecommunications outlet/connector 13 5.7.6 Performance marking . 14 ANSI/TIA-568-C.2 ii 5.7.7 Reliability . 14 5.7.8 Shield mating interface (screened only) . 14 5.7.9 Shield con

25、tinuity (screened only) 15 5.8 Cords and jumpers mechanical performance 15 5.8.1 Insulated conductor. 15 5.8.2 Insulated conductor color codes . 15 6 TRANSMISSION REQUIREMENTS . 16 6.1 General 16 6.1.1 Return loss 16 6.1.2 Insertion loss . 16 6.1.3 NEXT loss . 16 6.1.4 PSNEXT loss 16 6.1.5 FEXT loss

26、 . 16 6.1.6 ACRF 17 6.1.7 PSACRF . 17 6.1.8 TCL . 17 6.1.9 ELTCTL . 18 6.1.10 Coupling attenuation . 18 6.1.11 Propagation delay . 18 6.1.12 Propagation delay skew 18 6.1.13 PSANEXT loss 19 6.1.14 Average PSANEXT loss . 19 6.1.15 PSAFEXT loss (connecting hardware only) . 20 6.1.16 PSAACRF . 20 6.1.1

27、7 Average PSAACRF 21 6.2 Channel transmission performance . 22 6.2.1 DC loop resistance 22 6.2.2 DC resistance unbalance 22 6.2.3 Mutual capacitance . 22 6.2.4 Capacitance unbalance: pair-to-ground . 22 6.2.5 Characteristic impedance and structural return loss (SRL) 23 6.2.6 Return loss 23 6.2.7 Ins

28、ertion loss . 24 6.2.8 NEXT loss . 26 6.2.9 PSNEXT loss 28 6.2.10 FEXT loss . 29 6.2.11 ACRF 29 6.2.12 PSFEXT loss . 30 6.2.13 PSACRF . 30 6.2.14 TCL . 31 6.2.15 TCTL . 32 6.2.16 ELTCTL . 32 6.2.17 Coupling attenuation (screened only) . 32 6.2.18 Propagation delay . 33 6.2.19 Propagation delay skew

29、33 6.2.20 ANEXT loss . 33 6.2.21 PSANEXT loss 34 6.2.22 Average PSANEXT loss . 36 6.2.23 AFEXT loss . 37 6.2.24 PSAFEXT loss 37 6.2.25 PSAACRF . 38 6.2.26 Average PSAACRF 39 6.3 Permanent link transmission performance . 40 6.3.1 DC loop resistance 40 6.3.2 DC resistance unbalance 40 ANSI/TIA-568-C.2

30、 iii 6.3.3 Mutual capacitance . 40 6.3.4 Capacitance unbalance: pair-to-ground . 40 6.3.5 Characteristic impedance and structural return loss (SRL) 40 6.3.6 Return loss 41 6.3.7 Insertion loss . 42 6.3.8 NEXT loss . 44 6.3.9 PSNEXT loss 46 6.3.10 FEXT loss . 47 6.3.11 ACRF 48 6.3.12 PSFEXT loss . 49

31、 6.3.13 PSACRF . 49 6.3.14 TCL . 50 6.3.15 TCTL . 50 6.3.16 ELTCTL . 50 6.3.17 Coupling attenuation (screened only) . 50 6.3.18 Propagation delay . 50 6.3.19 Propagation delay skew 51 6.3.20 ANEXT loss . 52 6.3.21 PSANEXT loss 52 6.3.22 Average PSANEXT Loss 54 6.3.23 AFEXT loss . 55 6.3.24 PSAFEXT l

32、oss 55 6.3.25 PSAACRF . 56 6.3.26 Average PSAACRF loss . 57 6.4 Horizontal cable transmission performance . 58 6.4.1 DC resistance . 58 6.4.2 DC resistance unbalance 58 6.4.3 Mutual capacitance . 58 6.4.4 Capacitance unbalance: pair-to-ground . 58 6.4.5 Characteristic impedance and structural return

33、 loss (SRL) 58 6.4.6 Return loss 60 6.4.7 Insertion loss . 61 6.4.8 NEXT loss . 63 6.4.9 PSNEXT loss 64 6.4.10 FEXT loss . 65 6.4.11 ACRF 65 6.4.12 PSFEXT loss . 66 6.4.13 PSACRF . 66 6.4.14 TCL . 67 6.4.15 TCTL . 68 6.4.16 ELTCTL . 68 6.4.17 Coupling attenuation (screened only) . 69 6.4.18 Propagat

34、ion delay . 70 6.4.19 Propagation delay skew 70 6.4.20 Surface transfer impedance (screened only) 71 6.4.21 ANEXT loss . 71 6.4.22 PSANEXT loss 71 6.4.23 Average PSANEXT loss . 72 6.4.24 AFEXT loss . 72 6.4.25 PSAFEXT loss 72 6.4.26 PSAACRF . 72 6.4.27 Average PSAACRF 73 6.5 Bundled and hybrid cable

35、 transmission performance 73 6.5.1 PSNEXT loss 73 6.5.2 PSNEXT loss from internal and external pairs (category 6 cables only) 73 ANSI/TIA-568-C.2 iv 6.6 Cord cable 74 6.6.1 DC resistance . 74 6.6.2 Return loss 74 6.6.3 Insertion loss . 75 6.7 Backbone cable transmission performance . 76 6.7.1 Insert

36、ion loss . 76 6.7.2 NEXT loss . 76 6.7.3 PSNEXT loss 78 6.7.4 ACRF 79 6.7.5 PSACRF . 81 6.7.6 Propagation delay . 82 6.7.7 Propagation delay skew 82 6.8 Connecting hardware transmission performance 83 6.8.1 DC resistance . 83 6.8.2 DC resistance unbalance 84 6.8.3 Mutual capacitance . 84 6.8.4 Capac

37、itance unbalance: pair-to-ground . 84 6.8.5 Characteristic impedance and structural return loss (SRL) 84 6.8.6 Return loss 85 6.8.7 Insertion loss . 86 6.8.8 NEXT loss . 87 6.8.9 PSNEXT loss 88 6.8.10 FEXT loss . 89 6.8.11 ACRF 90 6.8.12 PSFEXT loss . 90 6.8.13 PSACRF . 90 6.8.14 TCL . 91 6.8.15 TCT

38、L . 92 6.8.16 ELTCTL . 92 6.8.17 Coupling attenuation (screened only) . 93 6.8.18 Propagation delay . 93 6.8.19 Propagation delay skew 93 6.8.20 Shield transfer impedance (screened only) 93 6.8.21 ANEXT loss . 94 6.8.22 PSANEXT loss 94 6.8.23 Average PSANEXT loss . 94 6.8.24 AFEXT loss . 94 6.8.25 P

39、SAFEXT loss 95 6.8.26 PSAACRF . 95 6.8.27 Average PSAACRF 95 6.9 Cords and jumpers transmission performance 95 6.9.1 Return loss 96 6.9.2 NEXT loss . 97 Annex A (normative) - Reliability testing of connecting hardware . 100 A.1 General 100 A.2 Solderless connections 100 A.3 Modular plugs and jacks 1

40、01 A.4 Other connecting hardware 102 A.5 Informative examples of referenced test schedules 103 A.5.1 General . 103 A.5.2 Non-accessible IDC, IEC 60352-3 104 A.5.3 Modular plug and jack, IEC 60603-7 series 105 Annex B (normative) - Measurement requirements . 106 ANSI/TIA-568-C.2 v B.1 General test co

41、nfiguration 106 B.2 Balun requirements 106 B.3 Ground plane requirements . 108 B.4 Network analyzer requirements . 109 B.5 Measurement points and spacing 109 B.6 Impedance matching terminations . 109 B.6.1 Balun terminations 109 B.6.2 Resistor terminations 109 B.6.3 Termination performance at the ca

42、libration plane 110 B.7 General calibration plane . 110 B.7.1 Calibration references . 111 B.7.1.1 100 reference load measurement procedure 111 B.7.1.2 100 reference load return loss requirement . 112 B.7.2 Typical test equipment performance parameters . 112 Annex C (normative) - Cabling and compone

43、nt test procedures . 113 C.1 Measurement test setup and apparatus 113 C.1.1 Interconnections between the device under test (DUT) and the calibration plane . 113 C.1.1.1 Impedance matched test leads 113 C.1.1.1.1 Individual twisted-pair test leads 114 C.1.1.1.2 Test leads as part of cables . 114 C.1.

44、1.2 Interconnection return loss requirements 114 C.1.2 Calibration methods 114 C.1.2.1 Two-port calibration of the test system 114 C.1.2.2 One-port calibration of the test system 114 C.2 Testing of cabling . 115 C.2.1 Cabling DC resistance 115 C.2.2 Return loss of channels and permanent links . 115

45、C.2.2.1 Test configuration of channel and permanent link return loss . 115 C.2.2.2 Measurement of channel and permanent link return loss . 116 C.2.3 Insertion loss of channels and permanent links 116 C.2.3.1 Test configuration of channel and permanent link insertion loss 116 C.2.3.2 Calibration of c

46、hannel and permanent link insertion loss 116 C.2.3.3 Measurement of channel and permanent link insertion loss . 117 C.2.4 NEXT loss of channels and permanent links 117 C.2.4.1 Test configuration of channel and permanent link NEXT loss 117 C.2.4.2 Calibration of channel and permanent link NEXT loss 1

47、17 C.2.4.3 Measurement of channel and permanent link NEXT loss . 117 C.2.5 FEXT loss of channels and permanent links 117 C.2.5.1 Test configuration of channel and permanent link FEXT loss . 117 C.2.5.2 Calibration of channel and permanent link FEXT loss 117 C.2.5.3 Measurement of channel and permane

48、nt link FEXT loss . 118 C.2.6 Cabling ANEXT loss and AFEXT loss laboratory measurement procedures . 118 C.2.6.1 Test configuration of channel and permanent link ANEXT loss 118 C.2.6.1.1 Termination of pairs 118 C.2.6.1.2 Cabling construction . 118 C.2.6.1.3 Determining number of disturbing component

49、s . 119 C.2.6.2 Calibration of channel and permanent link ANEXT loss or AFEXT loss . 119 C.2.6.3 Measurement of channel and permanent link ANEXT loss or AFEXT loss 120 C.2.7 ACRF and FEXT loss of channels and permanent links 121 C.2.7.1 Test configuration of channel and permanent link FEXT loss . 121 C.2.7.2 Calibration of channel and permanent link FEXT loss 121 C.2.7.3 Measurement of channel and permanent link FEXT loss . 121 C.2.8 TCL of channels 122 ANSI/TIA-568-C.2 vi C.2.8.1 Test configuration of channel TCL 122 C.2.8.2 Calibration of channel TCL 123 C.2.8.3 Measurement