TIA-598-D-2-2018 Optical Fiber Cable Color Coding- Addendum 2 Jacket Color for OM5 Indoor Fiber Cables (Addendum to TIA-598-D).pdf

1、 TIA-598-D-2 (Addendum to TIA-598-D) March 2018Optical Fiber Cable Color Coding- Addendum 2, Jacket Color for OM5 Indoor Fiber Cables ANSI/TIA-598-D-2-2018 APPROVED: MARCH 6, 2018 NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunder

2、standings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respe

3、ct preclude any member or non-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and

4、Publications are adopted by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not

5、 purport to address all safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. Any use o

6、f trademarks in this document are for information purposes and do not constitute an endorsement by TIA or this committee of the products or services of the company. (From Standards Proposal No. ANSI/TIA-PN-598-D-2, formulated under the cognizance of the TIA TR-42 Telecommunications Cabling Systems,

7、TR-42.12 Subcommittee on Optical Fibers and Cables). Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION Technology and Standards Department 1320 N. Courthouse Road, Suite 200 Arlington, VA 22201 U.S.A. PRICE: Please refer to current Catalog of TIA TELECOMMUNICATIONS INDUSTRY ASSOCIATION STANDARDS

8、AND ENGINEERING PUBLICATIONS or call IHS, USA and Canada (1-877-413-5187) International (303-397-2896) or search online at http:/www.tiaonline.org/standards/catalog/ All rights reserved Printed in U.S.A. NOTICE OF COPYRIGHT This document is copyrighted by TIA. Reproduction of these documents either

9、in hard copy or soft copy (including posting on the web) is prohibited without copyright permission. For copyright permission to reproduce portions of this document, please contact the TIA Standards Department or go to the TIA website (www.tiaonline.org) for details on how to request permission. Det

10、ails are located at: http:/www.tiaonline.org/standards/catalog/info.cfm#copyright or Telecommunications Industry Association Technology (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be ame

11、nded, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or invest

12、igation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigat

13、e or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminat

14、ory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in

15、 the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Procedures for American National Standards) then (i) TIA discl

16、aims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see TIA Procedures for American National Standards Annex C.1.2.3) of Essential Patent

17、(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor

18、compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRAN

19、TIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES

20、NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR A

21、NY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BA

22、SED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY

23、 TIA WITHOUT SUCH LIMITATIONS. ANSI/TIA-598-D-2 iii FOREWORD (This foreword is not part of this Standard.) This Standard addendum was formulated as TIA Standards Proposal number TIA-PN-598-D-2 under the cognizance of TIA TR-42.12, Subcommittee on Optical Fibers and Cables. This addendum augments Sta

24、ndard ANSI/TIA-598-D. This addendum defines a new color for the jackets of indoor cables defined in ANSI/TIA-568.3-D that contain wideband laser-optimized 50/125 m multimode fiber specified by TIA-492AAAE. This cable is also defined in ISO/IEC 11801-1 as cabled optical fiber performance category OM5

25、 containing fiber specified in IEC 60793-2-10 as A1a.4. This new color will be incorporated into the next revision of TIA-598. Key words: OM5, WBMMF, wideband multimode fiber, wide band, wide-band, WDM, SWDM, lime, jacket color ANSI/TIA-598-D-2 iv This page left blank. ANSI/TIA-598-D-2 1 Optical Fib

26、er Cable Color Coding - Addendum 2, Jacket Color for OM5 Indoor Fiber Cables 1 Scope This addendum defines the recommended jacket color for indoor cables containing wide-band multimode fiber, WBMMF. These fibers are defined in TIA-492AAAE and in IEC 60793-2-10 for fiber model A1a.4. The performance

27、of cabled WBMMF is defined in ANSI/TIA-568.3. The cabled optical fiber performance category for WBMMF is designated as OM5 in ISO/IEC 11801-1. 2 Normative references The following standards contain provisions which, through references in this text, constitute provisions of this Standard. At the time

28、 of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this Standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. ANSI and TIA maintain registers of currentl

29、y valid national standards published by them. ANSI/TIA-598-D-2014 Optical Fiber Cable Color Coding TIA-492AAAE Detail Specification for 50-m Core Diameter/125-m Cladding Diameter Class 1a Graded-Index Multimode Optical Fibers with Laser-Optimized Bandwidth Characteristics Specified for Wavelength Di

30、vision Multiplexing 3 Fiber, unit, and group color coding Note No changes to clause 3. ANSI/TIA-598-D-2 2 4 Color coding of indoor fiber optic cable Note Table 3 of ANSI/TIA-598-D is replaced with the following Table 3. Table 3 - Preferred coding scheme for indoor cable jackets Fiber type Jacket col

31、or1) Non-military Applications2) Military Applications Print Nomenclature Multimode (62.5/125) (TIA-492AAAA) Orange Slate OM1 Multimode (50/125) (TIA-492AAAB) Orange Orange OM2 Multimode (50/125) (850 nm laser-optimized) (TIA-492AAAC) Aqua - OM3 Multimode (50/125) (850 nm laser-optimized) (TIA-492AA

32、AD) Aqua - OM4 Multimode (50/125) (850 to 950 nm laser-optimized) (TIA-492AAAE) Lime - OM5 Multimode (100/140) Orange Green 100/140 Single-mode (TIA-492CAAA) Yellow Yellow OS1 Single-mode (TIA-492CAAB) Yellow Yellow OS1a or OS23) Polarization Maintaining Single-mode Blue - Undefined4) 1) Natural jac

33、kets with colored tracers may be used instead of solid-color jackets. 2) Other colors may be used providing that the print on the outer jacket identifies fiber classifications per 4.2.3. 3) The OSx performance category rating also depends on cabled fiber attenuation. 4) Because of the limited number

34、 of applications for these fibers, print nomenclature are to be agreed upon between manufacturer and end user. ANSI/TIA-598-D-2 3 5 Cable and wire color control and limits Note The row for the color Lime for cable jacket and footnote 2) are added to Table 4 of ANSI/TIA-598-D. Table 4 - Munsell wire

35、and cable color limits1) Color Centroid Hue Limits Value Limits Chroma Limits From To From To From To Lime (LM)2) 5.5GY 8.5/10 5GY 6GY 8 9 8 8 1) Differences between this Table and the component limits of EIA 359-A are listed at the end of Tables D-1. These differences exist within 359-A, or between

36、 359-A and this document, but the basis of such differences is not known. 2) The color Lime defined herein applies to cable jacket and is different than the Lime color definition in TIA-598-D-1 for fiber. Note The row for the color Lime is added to Table 5 of ANSI/TIA-598-D. Table 5 - Color centroid

37、s for PVC compounds for Indoor Cable jackets Color General PVC Weatherized PVC1) Lime (LM) 5.5GY 8.5/10 Undefined2) 1) Weatherized PVC has different color codes. Orange, for example, is different to facilitate ink marking. For color control, consideration should be given to using a E (deviation rang

38、e vector) value for deviations from the centroid, where E = Hue + Value + Chroma with the Hue, Value, and Chroma in Munsell notation (see text footnote #3). Using this system, E 6 indicates adequate control for most colors. 2) Munsell data for Lime are not available for weatherized PVC. ANSI/TIA-598

39、-D-2 4 Annex B (Informative) Note The row for the color Lime is added to Table B-1 of ANSI/TIA-598-D. Table B-1 - Color centroids for PVC compounds Color General PVC Weatherized PVC1) Lime (LM) 5.5GY 8.5/10 Undefined2) 1) Weatherized PVC has different color codes. Orange, for example, is different t

40、o facilitate ink marking. For color control, consideration should be given to using a E (deviation range vector) value for deviations from the centroid, where E = Hue + Value + Chroma with the Hue, Value, and Chroma in Munsell notation (see text footnote #3). Using this system, E 6 indicates adequat

41、e control for most colors. 2) Munsell data for Lime are not available for weatherized PVC. Annex G (Informative) BIBLIOGRAPHY AND REFERENCES Note Annex G is added to ANSI/TIA-598-D. IEC 60793-2-10 Optical fibres - Part 2-10: Product specifications Sectional specification for category A1 multimode fi

42、bres ISO/IEC 11801-1 Information technology Generic cabling for customer premises Part 1: General requirements ANSI/TIA-568.3 Optical Fiber Cabling and Components Standard THE TELECOMMUNICATIONS INDUSTRY ASSOCIATION TIA represents the global information and communications technology (ICT) industry t

43、hrough standards development, advocacy, tradeshows, business opportunities, market intelligence and world-wide environmental regulatory analysis. Since 1924, TIA has been enhancing the business environment for broadband, wireless, information technology, cable, satellite, and unified communications. TIA members products and services empower communications in every industry and market, including healthcare, education, security, public safety, transportation, government, the utilities. TIA is accredited by the American National Standards Institute (ANSI).