TIA-602-A-2005 Data Transmission Systems and Equipment Serial Asynchronous Automatic Dialing and Control《数据传输系统和设备 串行异步自动拨号和控制》.pdf

1、 TIASTANDARDData Transmission Systems andEquipment Serial AsynchronousAutomatic Dialing and ControlTIA-602-A(Revision of TIA/EIA-602)AUGUST 2000TELECOMMUNICATIONS INDUSTRY ASSOCIATIONRepresenting the telecommunications industry inassociation with the Electronic Industries Alliance ANSI/TIA/EIA-602-A

2、2000Approved: August 23, 2000 Reaffirmed: September 14, 2005Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-NOTICE TIA Engineering Standards and Publications are designed to se

3、rve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of su

4、ch Standards and Publications shall not in any respect preclude any member or non-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, ei

5、ther domestically or internationally. Standards and Publications are adopted by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting

6、 the Standard or Publication. This Standard does not purport to address all safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability

7、 of regulatory limitations before its use. (From Standards Proposal No. 3-4095-RF1, formulated under the cognizance of the TIA TR-30.2 Subcommittee on DTE-DCE Interfaces). Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION Standards and Technology Department 2500 Wilson Boulevard Arlington, VA 222

8、01 U.S.A. PRICE: Please refer to current Catalog of TIA TELECOMMUNICATIONS INDUSTRY ASSOCIATION STANDARDS AND ENGINEERING PUBLICATIONS or call Global Engineering Documents, USA and Canada (1-800-854-7179) International (303-397-7956) or search online at http:/www.tiaonline.org/standards/search_n_ord

9、er.cfm All rights reserved Printed in U.S.A. Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-NOTICE OF COPYRIGHT This document is copyrighted by the TIA. Reproduction of these d

10、ocuments either in hard copy or soft copy (including posting on the web) is prohibited without copyright permission. For copyright permission to reproduce portions of this document, please contact TIA Standards Department or go to the TIA website (www.tiaonline.org) for details on how to request per

11、mission. Details are located at: http:/www.tiaonline.org/about/faqDetail.cfm?id=18 OR Telecommunications Industry Association Standards (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be ame

12、nded, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or invest

13、igation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigat

14、e or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminat

15、ory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise inv

16、estigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURP

17、OSE OR USE, ITS MERCHANTABILITY AND ITS NON-INFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, R

18、ULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTA

19、INED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY O

20、R OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. Copyright Telecommunications Industry Association Provided by IHS

21、under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-602-AiDATA TRANSMISSION SYSTEMS AND EQUIPMENT -SERIAL ASYNCHRONOUS AUTOMATICDIALING AND CONTROL(From Standards Proposal No. 4686, formulated under the cognizance ofTIA Technical Subcommittee

22、TR-30.2 on Data TransmissionInterface and Protocols)CONTENTS1 SCOPE. 12 NORMATIVE REFERENCES 13 DEFINITIONS. 14 PHYSICAL LAYER. 15 SYNTAX AND PROCEDURES . 16 FUNCTIONS 1Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking

23、 permitted without license from IHS-,-,-TIA-602-AiiForeword(This Foreword is not part of this Standard)This Standard was formulated under the cognizance of TIA Subcommittee TR-30.2 on DataTransmission Interfaces and Protocols.This Standard is a revision of TIA/EIA-602, Data Transmission Systems and

24、Equipment -Serial Asynchronous Automatic Dialing and Control. ITU-T Recommendation V.250(formerly V.25bis) was approved by the ITU-T. The approval of V.250 was strongly backedby U.S. participants of Study Group 16. The TIA TR-30.2 members have determined thatITU-T Recommendation V.250 contains all o

25、f the requirements which were contained in thefirst edition of TIA/EIA-602. Recommendation V.250 goes on with additional commandswhich were not included in TIA/EIA-602. TIA/EIA-602-A therefore, is written to essentiallypoint to the ITU-T Recommendation V.250, listing those commands and options which

26、 arecontained in V.250 and apply to TIA/EIA-602-A.Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-602-A11 SCOPEThis Standard is applicable to the interconnection of data ter

27、minal equipment (DTE) anddata circuit-terminating equipment (DCE) employing serial binary data operation via the ITU-T Recommendation V.24, 100-series interchange circuits. This Standard, through referenceto ITU-T Recommendation V.250, provides four elements:- codifies existing practice in common as

28、ynchronous DCE that use the AT commandset. It identifies the protocol elements procedures, and behaviors that were found to beheld in common among a large portion of DCE manufacturers;- defines a format for extension of the AT command set in an orderly fashion. Itreserves the “+“ command prefix to b

29、e used by other standardized extensions;- provides a set of standardized extensions, based on the extended “+“ commandformat.2 NORMATIVE REFERENCESThe following standards which, through reference in this text, constitute provisions of thisStandard. At the time of publication, the editions indicated

30、were valid. All standards aresubject to revision, and parties to agreements based on the Standard are encouraged toinvestigate the possibility of applying the most recent editions of the standards indicatedbelow. ANSI and TIA maintain registers of currently valid national standards published bythem.

31、ITU-T Recommendation V.250 - Serial Asynchronous Automatic Dialing and Control3 DEFINITIONSPlease see ITU-T Recommendation V.2504 PHYSICAL LAYERPlease see ITU-T Recommendation V.2505 SYNTAX AND PROCEDURESPlease see ITU-T Recommendation V.2506 FUNCTIONSPlease see ITU-T Recommendation V.250 for a full

32、 description of the functions andcommands. Table 1 lists the commands contained in Recommendation V.250 which applyto this Standard. The table also lists the section numbers of Recommendation V.250 foreasier reference.Copyright Telecommunications Industry Association Provided by IHS under license wi

33、th EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-602-A2Table 1 - TIA/EIA-602-A CommandsCommand Title V.250 SectionD Dial (Look at syntax and extensions) 6.3.1T Select Tone Dialing 6.3.2P Select Pulse Dialing 6.3.3A Answer 6.3.5H Hook Control 6.3.6Z Reset t

34、o Default Configuration 6.1.1&F Set to Factory-defined Configuration 6.1.2O Return to Online Data State 6.3.7I Request Identification Information 6.1.3S3 Command Line Termination Character 6.2.1S4 Response Formatting Character 6.2.2S5 Command Line Editing Character 6.2.3E Command Echo 6.2.4Q Result

35、Code Suppression 6.2.5V ACE (DCE in V.250) Response Format 6.2.6X Result Code Selection and Call Progress MonitoringControl6.2.7S0 Automatic Answer 6.3.8S6 Pause Before Blind Dialing 6.3.9S7 Connection completion Timeout 6.3.10S8 Comma Dial Modifier Time 6.3.11S10 Automatic Disconnect Delay 6.3.12L

36、Monitor Speaker Loudness 6.3.13M Monitor Speaker Mode 6.3.14&C Circuit 109 (Received line signal detector) Behavior 6.2.8&D Circuit 108 (Data terminal ready) Behavior 6.2.9RING Ring Indication (result code) 6.3.4+DR Data Compression Reporting 6.6.2+DS Data Compression 6.6.1+EB Break Handling in Erro

37、r Control operation 6.5.2+EFCS 32-bit Frame Check Sequence 6.5.4+ER Error Control Reporting 6.5.5+ES Error Control Selection 6.5.1+ESR Selective Repeat 6.5.3+ETBM Call Termination Buffer Management 6.5.6+GCAP Request Complete Capabilities List 6.1.9+GMI Request Manufacturer Identification 6.1.4+GMM

38、Request Model Identification 6.1.5+GMR Request Revision Identification 6.1.6+GOI Request Global Object Identification 6.1.8+GSN Request Product Serial Number Identification 6.1.7+ICF DTE-DCE Character Framing 6.2.11+IFC DTE-DCE Local Flow Control 6.2.12+ILRR DTE-DCE Local Rate Reporting 6.2.13+IPR F

39、ixed DTE Rate 6.2.10+MA Modulation Automode Control 6.4.2+MR Modulation Reporting Control 6.4.3+MS Modulation Selection 6.4.1+MV18R V.18 Reporting Control 6.4.5+MV18S V.18 Selection 6.4.4Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduc

40、tion or networking permitted without license from IHS-,-,-Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-