TIA-604-5-E-2015 FOCIS 5 Fiber Optic Connector Intermateability Standard- Type MPO.pdf

1、 TIA-604-5-E November 2015FOCIS 5 Fiber Optic Connector Intermateability Standard- Type MPO NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and impr

2、ovement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of TIA from manufacturing or selling products not c

3、onforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accordance with the American National Standards Insti

4、tute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems associated with its use or all applicable regula

5、tory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. Any use of trademarks in this document are for information purposes and do not constitute an endo

6、rsement by TIA or this committee of the products or services of the company. (From Project No. 3-3957-RV5-A, formulated under the cognizance of the TIA TR-42 Telecommunications Cabling Systems, TR-42.13 Subcommittee on Passive Optical Devices and Fiber Optic Metrology). Published by TELECOMMUNICATIO

7、NS INDUSTRY ASSOCIATION Technology (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of

8、 contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed

9、 and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discuss

10、ions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manu

11、al have been complied with as respects the Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specific

12、ation, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Procedures for American National Standards) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters

13、of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see TIA Procedures for American National Standards Annex C.1.2.3) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR

14、in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise invest

15、igate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE

16、 OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE

17、OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED

18、 HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OT

19、HERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. TIA-604-5-E i FOCIS 5 FIBER OPTIC CONNECTOR INTERMATEABILITY STANDARD

20、Type MPO CONTENTS 1 INTRODUCTION 1 2 ADAPTER STANDARD 3 3 PLUG STANDARD 4 4 DEVICE RECEPTACLE STANDARD 7 5 APPLICATIONS 9 6 ANNEX A 28 TIA-604-5-E ii TIA-604-5-E 1 1 Introduction 1.1 Scope FOCIS 5 presents the intermateability standard for connectors with the commercial designation of MPO, and is us

21、ed as an addendum to TIA/EIA-604, Fiber Optic Connector Intermateability Standards. The provisions of TIA/EIA-604 apply to this document. 1.2 Objective Intermateability standards define the minimum physical attributes of mating connector components. Fully dimensioned components are not within the sc

22、ope or intent of FOCIS 5. The requirements of FOCIS 5 have been selected with the objectives of ensuring that any compatible combination of plugs and adapters, or plugs and device receptacles, conforming to the requirements of FOCIS 5 will mechanically intermate, and that intermated connector assemb

23、lies will meet their common level of performance. The common level of performance of an intermated connector assembly is the least demanding set of performance requirements in the separate performance specifications of each of the products in the assembly; see TIA/EIA 604. 1.3 Limitations Realizatio

24、n of the objectives for FOCIS 5 may be limited by the following considerations: 1.3.1 Configuration Options There are configuration options in FOCIS 5 that impose limitations on the combinations of plugs, adapters and device receptacles that should be combined in a connector assembly: Both plugs sho

25、uld have the same number of fiber rows, option m; Both plugs should have the same number of fibers per row, option n; Both plugs should have the same alignment pin/hole diameter range option, option t; Both plugs should have the same angles of contact, option a; For k=1 adapters, mated plugs must be

26、 of the same ferrule orientation, option o; For k=2 adapters, when mating plugs with a=8, one mated plug must have ferrule orientation o=1 and the other plug must have ferrule orientation o=2. Device receptacles with: option a=0 are only compatible with plugs of option a=0 option a=8 are only compat

27、ible with plugs of option a=8 and ferrule orientation option o=1 Each plug in an assembly should have different plug interface, option c. Device receptacles are defined only with option c = 1; Only plugs with option c = 2 should be inserted into a device receptacle. TIA-604-5-E 2 1.3.2 Common Perfor

28、mance The locations of the optical cores, as shown in Figure 3.2.3, are defined, without tolerances, by their true positions. To apply common performance the distribution of the optical cores, as shown in Figure 3.2.3, should be centered on their respective true positions. This standard does not con

29、trol the intrinsic loss that may occur between fibers in a connector assembly. Intrinsic loss between fibers must be added to the basic connector loss. 1.4 Drawing practices To be in compliance with ANSI and ISO Engineering Drawing Practices, the following shall apply: 1. Where a tolerance of form i

30、s not specified, the limits of the dimensions for a feature control the form as well as the size. The combined effects of size and form variations may not exceed the envelope of perfect form at the MMC (maximum material condition). 2. Where interrelated features of size (features shown with a common

31、 axis or center plane) have no geometric tolerance of location or runout specified, the limits of the dimensions for a feature control the location tolerance as well as the size. When the interrelated features are at the MMC, they shall be perfectly located to each other as indicated by the drawing.

32、 3. Where perpendicular features (features shown at right angles) have no geometric tolerance or orientation or runout specified, the limits of the dimensions for a feature control the orientation tolerance as well as the size. When perpendicular features are at the MMC, they shall be perfectly orie

33、nted to each other as indicated by the drawing. 4. As the size of a feature departs from the MMC, variations in form, location and orientation are permissible. TIA-604-5-E 3 2 Adapter standard 2.1 Adapter designation The complete designation for a FOCIS 5 connector adapter is: FOCIS 5 A - k - m wher

34、e: A designates that it is an adapter k defines the keying configuration m defines the mounting configuration 2.2 Adapter requirements FOCIS 5 adapters shall meet the requirements of this section. 2.2.1 Adapter interface dimensions The dimensional requirements for FOCIS 5 adapters are defined in Fig

35、ure 2.2.1. 2.2.2 Adapter keying options Two options have been defined for the adapter keying configuration: k = 1 shown in Figure 2.2.1 k = 2 shown in Figure 2.2.2 2.2.3 Adapter mounting options The only mounting option specified is m = 0. The mounting features for this option are undefined. TIA-604

36、-5-E 4 3 Plug standard 3.1 Plug designation The complete designation for a FOCIS 5 connector plug is: FOCIS 5 P m n - k - a - c t - o where: P designates that it is a plug m is the number of fiber rows n is the number of fibers per row k defines the keying option a is the angle of contact option c d

37、esignates whether the plug interface contains alignment pins or holes t designates the alignment pin/hole diameter range option o designates ferrule orientation relative to key 3.2 Plug requirements FOCIS 5 plugs shall meet the requirements of this section. 3.2.1 Plug interface dimensions The dimens

38、ional requirements for FOCIS 5 plugs are defined in Figure 3.2.1 and Figure 3.2.1a. Ferrule material shall have a modulus of elasticity of less than 25 GPa. 3.2.2 Ferrule extension and contact force The travel of the ferrule relative to the plug body and the spring force on the ferrule are defined i

39、n Figure 3.2.2. 3.2.3 Number of fiber rows options The six values defined for the number of fiber rows are specified in Table 1. Table 1 Number of Fiber Rows Options Fiber rows option Number of fiber rows Maximum number of fibers per plug m = 1 1 12 m = 2 2 24 m = 3 3 36 m = 4 4 48 m = 5 5 60 m = 6

40、6 72 The dimensional requirements for fiber hole positions and alignment pin/hole positions for plugs with values of m from 1 through 6 are defined in Figures 3.2.3a through 3.2.3f respectively. TIA-604-5-E 5 3.2.4 Number of fibers per row options The five values defined for the number of fibers in

41、a single row are specified in Table 2. The number of fibers in the plug is equal to the number of fiber rows (m) times the number of fibers per row (n), or m n. The fiber configurations are shown in Figures 3.2.3a through 3.2.3f. Table 2 Number of Fibers per Row Options Fibers per row option Number

42、of fibers per row n = 4 4 n = 6 6 n = 8 8 n = 10 10 n = 12 12 The dimensional requirements for fiber hole positions and alignment pin/hole positions for plugs with values of n given in Table 2 are defined in Figures 3.2.3a through 3.2.3f. 3.2.5 Plug keying options One keying option for FOCIS 5 plugs

43、 has been defined, k = 1. The k = 1 option is shown in Figure 3.2.1. 3.2.6 Contact angle options The contact angle is the angle between the plane of contact of mating fibers and a plane perpendicular to the optical axis of the plug. Two options have been defined for the contact angle: a = 0, designa

44、tes an angle of 0 a = 8, designates an angle of 8 The dimensional requirements are defined in Figure 3.2.4. 3.2.7 Plug interface options Two options have been defined for the plug interface: c = 1, designates a plug interface that contains alignment pins (shown in Figure 3.2.1). c = 2, designates a

45、plug interface that contains alignment holes. TIA-604-5-E 6 3.2.8 Alignment pin/hole diameter options Alignment pin/hole diameter options for FOCIS 5 plugs are specified in Table 3. Table 3 Alignment Pin/Hole Diameter Range Options Dimensions (mm) Alignment Pin Diameter Alignment Hole Diameter Optio

46、n Minimum Maximum Minimum Maximum t = 1 0.698 0.699 0.699 0.700 t = 2 0.697 0.699 0.699 0.701 Note: Alignment Pin/Hole Diameter Option t = 1 is typically used in single-mode fiber applications, t = 2 for multimode applications. 3.2.9 Ferrule orientation options Three options have been defined for th

47、e ferrule orientation relative to the MPO key: o = 0, designates a ferrule that can be oriented in either direction. Typically this is a ferrule with a contact angle of 0 (i.e. a = 0). o = 1, designates a “down-angled” angled ferrule. It has a contact angle of 8 (i.e. a = 8) oriented such that the M

48、PO key is on the same side as the “flat” portion of the ferrule endface, i.e. the feature assigned dimension T in Figure 3.2.4. o = 2, designates an “up-angled” angled ferrule. It has a contact angle of 8 (i.e. a = 8) oriented such that the MPO key is on the opposite side of the “flat” portion of th

49、e ferrule endface, i.e. the feature assigned dimension T in Figure 3.2.4. The ferrule orientation options are defined in Figure 3.2.4. TIA-604-5-E 7 4 Device receptacle standard 4.1 Device receptacle designation A device receptacle provides an optical connection to a device such as an optical source or detector. It is, in effect, half of an adapter. A receptacle for FOCIS 5 plugs shall be designed to intermate with an option c = 2 plug. The complete designation for a FOCIS 5 device receptacle is: FOCIS 5 R - m n - k - a - c - t where: R