1、 TIA STANDARD Data Transmission Systems and Equipment - Serial Asynchronous Automatic Dialing and Control for Character Mode DCE on Wireless Data Services TIA-678-A (Revision of TIA/EIA-678) SEPTEMBER 2004 TELECOMMUNICATIONS INDUSTRY ASSOCIATION Representing the telecommunications industry in associ
2、ation with the Electronic Industries Alliance ANSI/TIA-678-A-2004 Approved: September 3,2004 Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-NOTICE TIA Engineering Standards and
3、 Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their part
4、icular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their volu
5、ntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligat
6、ion whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices an
7、d to determine the applicability of regulatory limitations before its use. (From Standards Proposal No.3-3499-RV1, formulated under the cognizance of the TIA TR-30.2 DTE-DCE Interfaces (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its prese
8、nt or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by o
9、ne or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with referen
10、ce to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing term
11、s or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. TIA does not enforce or monitor compliance with the contents of the Document. TIA
12、 does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS
13、 FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NON-INFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE C
14、ONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING
15、FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY,
16、 TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS.Copyright Telecomm
17、unications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-678-A FOREWORD (This Foreword is not part of the Standard) This Standard is based on the work of the Portable Computer and Communications Assoc
18、iation, PCCA STD-101, including the provisionally approved Annex F and Annex I. Annexes F and I are renumbered Annexes B and C respectively. Most of 5.2/STD-101, which is redundant with TIA/EIA-602-A or ITU-T V.250, has been removed. This Standard includes a new Annex D which defines PAD Control com
19、mands for Wireless DCE used in Packet Data Networks. The commands were added as Annex D in the Table of Contents, and are defined in the body of the Annex, which has been added to this revision. Appendix I has been modified to include summaries of the commands, and the Scope has been modified. This
20、revision of the Standard incorporates changes detailed in TIA/EIA-678-1 Addendum 1 to TIA/EIA-678. In addition, the references to ITU-T V.25ter have been replaced with references to ITU-T V.250. References to other standards have also been updated or replaced with the applicable reference. Copyright
21、 Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-678-A Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or network
22、ing permitted without license from IHS-,-,-TIA-678-A iData Transmission Systems and Equipment - Serial Asynchronous Automatic Dialing and Control for Character Mode DCE on Wireless Data Services Contents 1. SCOPE .1 2. NORMATIVE REFERENCES 2 3. INFORMATIVE DEFINITIONS.3 3.1. INTENDED AUDIENCE .3 3.2
23、. STYLE CONVENTIONS 3 3.3. INTRODUCTORY DEFINITIONS .3 3.4. REFERENCE MODEL 5 3.5. PROTOCOL DEFINITIONS 6 3.5.1. End-to-End Protocol.6 3.5.2. Command State Protocol.9 3.5.3. Additional Information 10 3.6. DCE FUNCTIONAL BLOCK DIAGRAM .10 3.7. DCE OPERATING STATES13 3.8. ADDITIONAL DEFINITIONS .14 4.
24、 DTE-DCE LINK (NORMATIVE) .15 4.1. Low-Level Logical DTE-DCE Interface.15 4.2. Physical DTE-DCE Interface.16 5. COMMAND STATE OPERATION (NORMATIVE)17 5.1. COMMAND STRUCTURE17 5.2. FUNCTIONS .19 5.2.1. TIA/EIA-602-A Action Commands .19 5.2.2. ACE/DTE Interface Parameters.25 5.2.3. ACE Parameters25 5.
25、2.4. Wireless DCE Extended Commands and Parameters.26 5.3. RESULT CODES .32 5.4. PARAMETER AND COMMAND SCOPE RULES 35 5.4.1. Scope, Visibility, and Volatility Restrictions .35 5.4.2. Parameter Value Conflict Procedures .35 6. DATA STATE OPERATION (NORMATIVE) .38 6.1. +WS45 AND +WS46 IN ON-LINE DATA
26、STATE .38 6.2. REQUIREMENTS FOR CHARACTER STREAM OPERATION.39 6.3. TRANSPARENT CHARACTER STREAM39 6.4. RELIABLE TRANSPARENT CHARACTER STREAM.40 Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without licens
27、e from IHS-,-,-TIA-678-A ii ANNEX A: BUILDING ON THIS STANDARD.41 A.1. EXTENSIBILITY FRAMEWORK 41 A.2. COMMAND SET EXTENSIONS .43 A.2.1. Commands in Proposed Annexes.43 A.2.2. Manufacturer-Specific Commands43 A.3. RECOMMENDED ANNEX CONTENTS44 ANNEX B, MISCELLANEOUS COMMANDS45 B.1 SCOPE45 B.2 NOTES O
28、N INTERRELATED COMMANDS.45 B.3 MISCELLANEOUS COMMANDS 45 B.3.1 Miscellaneous Parameter Commands 45 B.3.2 Miscellaneous Action Commands .48 B.4 ADDITIONS TO +W COMMAND51 ANNEX C - COMMAND EXTENSIONS FOR ANALOG CELLULAR DATA MODEMS 52 C.1 SCOPE 52 C.2 INVOCATION.52 C.3 CONFIGURATION 52 C.4 ANALOG CELL
29、ULAR RESULT CODES53 C.5 ANALOG CELLULAR DATA MODE COMMANDS 53 C.5.1 Data over Analog Cellular Commands Query53 C.5.2 Call Session Time Limit54 C.5.3 Enable Cellular Result Codes 54 C.5.4 Roam Lockout 55 C.5.5 Phone Specification56 C.5.6 Bias Modem Audio Gain 56 C.5.7 Keypad Emulation 57 C.5.8 Phone
30、Number Directory Selection60 C.5.9 Phone Battery Query60 ANNEX D - COMMAND EXTENSIONS FOR PAD CONTROL IN PACKET NETWORKS62 D.1 SCOPE 62 D.2. PAD CONTROL PARAMETER COMMANDS62 D.2.1. Time-Independent Escape Sequence Enable .62 D.2.2. Disconnect Procedure62 D.2.3. Local Online Echo Enable63 D.2.4. Forw
31、arding Character Feature Mask .64 D.2.5. PAD Primary Forwarding Character.64 D.2.6. PAD Secondary Forwarding Character65 D.2.7. Packet Termination Upon Entering Online Command State65 D.2.8. No Data Disconnect .66 D.2.9. Data Disconnect.66 D.2.10. PAD Break Handling 67 Copyright Telecommunications I
32、ndustry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-678-A iiiD.2.11. PAD Inter-Character Timer 67 D.2.12. PAD Inter-Line Timer68 D.2.13. PAD Input Buffer Editing Enable68 D.2.14. PAD Input Buffer Backspace C
33、haracter.69 D.2.15. PAD Maximum Packet Length .70 D.2.16. Display Memory Usage 70 D.2.17. Flush WAN-bound Data Buffer.71 D.2.18. Display Supported Annex D Commands71 D.3. ADDITIONS TO +W COMMAND.72 APPENDIX I. COMMAND SET SUMMARY (INFORMATIVE)73 Copyright Telecommunications Industry Association Prov
34、ided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-678-A iv Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,
35、-TIA-678-A 1 1. SCOPE This standard is applicable to the interconnection of data terminal equipment (DTE) and data circuit-terminating equipment (DCE) employing serial binary data operation via the 100-series interchange circuits or data operation over equivalent logical circuits. This standard spec
36、ifies extensions to the protocol elements, procedures, and behaviors described in ANSI/TIA/EIA-602-1992 (TIA/EIA-602-A). These extensions are based on the “+” command prefix that is reserved by TIA/EIA-602-A for standardized extensions, and adhere to the extended command syntax conventions establish
37、ed by ITU-T V.250. This standard generalizes the protocol elements, procedures, and behaviors described in TIA/EIA-602-A, making them applicable to DCE which operate over arbitrary data networks. This standard defines the commands that the DTE may issue to: (2) Interrogate the capabilities of the DC
38、E, including determination of what data network types and associated network-specific AT command set extensions are supported by the DCE; (3) Select among supported data network types for subsequent DCE processing of automatic calling and automatic call answering functions; and, (4) Select among sup
39、ported DTE-DCE interface protocols. This standard defines the responses the DCE shall issue to those commands. Where possible, these commands and responses are taken from existing TIA standards. This standard establishes required mappings between manufacturer-specific data network services and the D
40、CE protocol elements, procedures, and behaviors referenced in TIA/EIA-602-A (e.g. ring, dial, answer, busy, on-line data state). This standard establishes conventions for interworking of network-specific AT command sets in DCE which support multiple data network types. This standard establishes a mi
41、nimal DCE Common AT Command Set consisting of: (1) Those commands defined in TIA/EIA-602-A and ITU-T V.250, and (2) Required extensions using the +W command prefix in accordance with ITU-T V.250. This standard establishes conventions for uniform extension of its own scope and content through Annexes
42、. Annex D defines optional extensions to the protocol elements, procedures and behaviors defined in the original standard, based on +WS and +WC command prefixes reserved for standardized extensions. The parameters in Annex D only affect operation of the DCE in Transparent Character Stream mode and i
43、n Reliable Transparent Character Stream mode, as selected by +WS45=0 or by +WS45=1. Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-678-A 2 2. NORMATIVE REFERENCES The follo
44、wing standards and other publications contain provisions or normative references which, through reference in this text, constitute provisions of this standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on thi
45、s standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. Each publishing standards body maintains a register of currently valid national, international, and industry standards published by them. TIA-232-F-2000, Interface Between
46、Data Terminal Equipment and Data Circuit-Terminating Equipment Employing Serial Binary Data Interchange. TIA-561-2003, Simple 8 Position Non-Synchronous Interface Between Data Terminal Equipment and Data Circuit-Terminating Equipment Employing Serial Binary Data Interchange. TIA-574-2003, Simple 9 P
47、osition Non-Synchronous Interface Between Data Terminal Equipment and Data Circuit-Terminating Equipment Employing Serial Binary Data Interchange. TIA/EIA-578-B-2000, Asynchronous Facsimile DCE Control Standard, Service Class 1. TIA/EIA-592-A-1998, Asynchronous Facsimile DCE Control Standard, Servic
48、e Class 2. TIA/EIA-602-A-2000, Data Transmission Systems and Equipment - Serial Asynchronous Automatic Dialing and Control. TIA/IS-707-A-1998, Data Services Options for Wideband Spread Spectrum Systems. TIA-136, TDMA Third Generation Wireless Standards ITU-T V.24, Lists of Definitions for Interchang
49、e Circuits Between Data Terminal Equipment (DTE) and Data Circuit Terminating Equipment (DCE) ITU-TV.250-2003, Serial Asynchronous Automatic Dialing and Control ITU-T V.253-1998, Control of voice-related functions in a DCE by an Asynchronous DTE ITU-T V.80- 1996, In-band DCE control and synchronous data modes for asynchronous DTE ITU-T T.31-1995, Asynchronous Facsimile DCE Control, Ser
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1