TIA-707 04-B-2010 Data Service Options for Spread Spectrum Systems Async Data and Fax Services《扩频系统数据服务选项 异步数据和传真服务》.pdf

1、 4 TIA-707.04-B March 2010Data Service Options for Spread Spectrum Systems: Async Data and Fax Services NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeabil

2、ity and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of TIA from manufacturing or selling pr

3、oducts not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accordance with the American National Sta

4、ndards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems associated with its use or all appli

5、cable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Standards Proposal No. 3-4617.04-UGRV, formulated under the cognizance of the T

6、IA TR-45.5 -Spread Spectrum Digital Technology - Mobile and Personal Communications Standards) Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION Standards and Technology Department 2500 Wilson Boulevard Arlington, VA 22201 U.S.A. PRICE: Please refer to current Catalog of TIA TELECOMMUNICATIONS IN

7、DUSTRY ASSOCIATION STANDARDS AND ENGINEERING PUBLICATIONS or call IHS, USA and Canada (1-877-413-5187) International (303-397-2896) or search online at http:/www.tiaonline.org/standards/catalog/ All rights reserved Printed in U.S.A. NOTICE OF COPYRIGHT This document is copyrighted by the TIA. Reprod

8、uction of these documents either in hard copy or soft copy (including posting on the web) is prohibited without copyright permission. For copyright permission to reproduce portions of this document, please contact TIA Standards Department or go to the TIA website (www.tiaonline.org) for details on h

9、ow to request permission. Details are located at: http:/www.tiaonline.org/standards/catalog/info.cfm#copyright OR Telecommunications Industry Association Standards (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form;

10、 (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. T

11、IA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims

12、any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are r

13、easonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. If the Document contains one or more Normative References to a document published by another organizat

14、ion (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) th

15、en (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and publ

16、ished pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance w

17、ith the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERN

18、ING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENT

19、ATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL D

20、AMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BRE

21、ACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT

22、 SUCH LIMITATIONS. TIA-707.04-B CONTENTS 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 1 INTRODUCTION 1-1 1.1 General Description . 1-1 1.2 Terms 1-1 1.3 References . 1-3 2 REQUIREMENTS FOR THE ASYNC DATA AND FAX PROTOCOL STACK 2-1 2.1 Overview 2-1 2.2 The Ap

23、plication Interface . 2-2 2.3 Transport Layer . 2-7 2.4 Network Layer 2-8 2.4.1 General Requirements 2-8 2.4.2 Assignment of Network Address . 2-9 2.5 Data Link Layer . 2-9 2.5.1 Sub-Network Dependent Convergence Function. 2-9 2.5.2 PPP Layer. 2-10 2.5.3 IPCP. 2-10 2.5.4 Link Control Protocol . 2-10

24、 2.5.5 Requirements for Async Data and Fax 2-11 2.5.5.1 Traffic Channel Usage. 2-11 3 REQUIREMENTS FOR THE RADIO INTERFACE 3-1 3.1 Service Option Number 3-1 3.2 Multiplex Option Interface . 3-1 3.3 Procedures Using Service Option Negotiation. 3-1 3.3.1 Initialization and Connection of the Service Op

25、tion 3-2 3.3.1.1 Mobile Station Requirements 3-2 3.3.1.2 BS/MSC Requirements. 3-3 3.4 Procedures Using Service Negotiation 3-3 3.4.1 Mobile Station Requirements 3-3 3.4.2 BS/MSC Requirements 3-5 4 REQUIREMENTS FOR UMINTERFACE CALL PROCESSING . 4-1 4.1 Connection Establishment. 4-1 4.1.1 Mobile Origi

26、nation 4-1 4.1.2 Mobile Termination 4-3 i TIA-707.04-B CONTENTS ii 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 4.1.3 Service Option Change to Group-3 Facsimile Service . 4-4 4.1.4 Group-3 Facsimile Service Option Change to Voice Service 4-5 4.1.5 Conversation Substate. 4-6 4.1.

27、6 Traffic Channel Handoff. 4-7 4.2 Connection Release . 4-7 4.3 Authentication. 4-8 5 RECOMMENDATIONS FOR THE MODEM TO PSTN INTERFACE. 5-1 5.1 Recommended Modem Standards 5-1 5.2 Flow Control 5-1 5.2.1 Flow Control for Async Data 5-1 5.2.2 Flow Control for Group-3 Fax 5-1 FIGURES Figure 2-1. The Asy

28、nc Data and Fax Protocol Stack Architecture. 2-1 TABLES Table 2-1. IP Type of Service 2-3 Table 2-2. Compression Options 2-6 Table 2-3. Group 3 Fax Compression Options 2-7 Table 3-1. Implicit Service Configuration Attributes for Service Options 4, 5, 4100 or 4101 when Service Option Negotiation is U

29、sed . 3-2 Table 3-2. Valid Service Configuration Attributes for Service Options 4, 5, 4100 and 4101. 3-4 Table 3-3. Valid Service Configuration Attributes for Service Options 12 and 13 3-4 TIA-707.04-B 1 0INTRODUCTION 1 1.1 5General Description 2 Service Options 4, 4100 and 12 provide asynchronous (

30、abbreviated as “async” hereafter) data transmission capability on CDMA2000 3 4 5 6 7 8 9 10 11 12 13 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 1wideband spread spectrum systems using the protocols and procedures defined herein. Service Options 5, 4101 and 13 provide Group-3 facsimile (ab

31、breviated as “fax” hereafter) transmission capability for these systems. Service Options 4, 5, 4100 and 4101 provide async data and group 3 fax service using a default service configuration including Multiplex Option 1 data rates. Service Options 12 and 13 provide async data and group 3 fax service

32、using a default service configuration including Multiplex Option 2 data rates. Other combinations of service configuration attributes are available for service options 4, 5, 4100, 4101, 12, and 13 through the use of service negotiation procedures. 1.2 6Terms 14 AT Command Set. Command set interface

33、between data terminal equipment (DTE) and data circuit terminating equipment (DCE). Base Station (BS). A station in the Domestic Public Cellular Radio Telecommunications Service, other than a mobile station, used for communicating with mobile stations. Depending upon the context, the term base stati

34、on may refer to a cell, a sector within a cell, or other part of the cellular system. BS. See base station. BS/MSC. The base station and mobile switching center considered as a single functional entity. Data Circuit-Terminating Equipment (DCE). A DCE connects a TE2 to the PSTN. A typical DCE would b

35、e a V-series modem. For Group-3 Fax Service, the DCE and its associated TE2 are often combined into a single Group-3 fax machine. Digital Facsimile. That form of facsimile in which densities of the original are sampled and quantified as a digital signal for processing, transmission, or storage. Erro

36、r Correction Mode (ECM). A mode of operation for T.30 fax service providing end-to-end reliable data transport. Facsimile. The process by which a document is scanned, converted into the electrical signals, transmitted, and recorded or displayed as a copy of the original. 1CDMA2000is the trademark fo

37、r the technical nomenclature for certain specifications and standards of the Organizational Partners (OPs) of 3GPP2. Geographically (and as of the date of publication), CDMA2000is a registered trademark of the Telecommunications Industry Association (TIA-USA) in the United States. 1-1 TIA-707.04-B F

38、ax. An abbreviation for facsimile. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 Fax Calling Station. The fax machine or fax modem initiating the fax call. Group-3. Digital Facsimile equipment per CCITT Recommendation T.4. ICMP. Internet Control M

39、essage Protocol. IANA. Internet Assigned Number Authority. Interworking Function (IWF). An IWF provides the functions needed for terminal equipment connected to a mobile termination to communicate with terminal equipment connected to the PSTN. A physical implementation may include a pool of modems.

40、IP. Internet Protocol. IPCP. Internet Protocol Control Protocol. L. L-Interface. The interface between an IWF and BS/MSC. LCP. PPP Link Control Protocol. Mobile Station. A station in the Domestic Public Cellular Radio Telecommunications Service intended to be used while in motion or during halts at

41、unspecified points. Mobile stations include portable units (e.g., hand-held personal units) and units installed in vehicles. Mobile Termination 0 (MT0). An MT0 is a self-contained data-capable mobile termination that does not support an external interface. Mobile Termination 2 (MT2). An MT2 provides

42、 a non-ISDN (Rm) user interface, e.g., CCITT V series or CCITT X series. Modem Client. The name given to the TCP well-known port used for CDMA async data and fax services in mobile stations. Modem Server. The name given to the TCP well-known port used for CDMA async data and fax services in a BS/MSC

43、. Modem Emulation Service. A wireless data service where the mobile termination appears as a standard telephone modem to a data terminal. MSC. Mobile Switching Center. PPP. Point-to-Point Protocol. PSTN. Public Switched Telephone Network. RFC. Request for Comments. The generic name of a standard dev

44、eloped by the Internet Engineering Task Force (IETF). RLP. Radio Link Protocol. SNDCF. Sub-Network Dependent Convergence Function. TCP. Transmission Control Protocol. Terminal Equipment 2 (TE2). A TE2 is a data terminal device that has a non-ISDN user-network interface, e.g., CCITT V series or CCITT

45、 X series. 1-2 TIA-707.04-B 1.3 7References 1 The following standards and 3GPP2 specifications contain provisions that, through reference in this text, constitute provisions to this document. All referenced publications are subject to revision, and parties to agreements based on this document are en

46、couraged to investigate the possibility of applying the most recent editions of the works indicated below. ANSI and TIA maintain registers of currently valid national standards published by them. 2 3 4 5 6 7 3GPP2 Specifications and SDO Standards 1. Reserved 2. 3GPP2: C.S0002-C v1.0 ARIB: CWTS: TIA:

47、 TIA/EIA/IS-2000.2-C TTA: TTC: Physical Layer Standard for cdma2000 Spread Spectrum Systems Release C 3. 3GPP2: C.S0003-C v1.0 ARIB: CWTS: TIA: TIA/EIA/IS-2000.3-C TTA: TTC: Medium Access Control (MAC) for cdma2000 Spread Spectrum Systems Release C 4. 3GPP2: C.S0004-C v1.0 ARIB: CWTS: TIA: TIA/EIA/I

48、S-2000.4-C TTA: TTC: Signaling Link Access Control (LAC) for cdma2000 Spread Spectrum Systems Release C 5. 3GPP2: C.S0005-C v1.0 ARIB: CWTS: TIA: TIA/EIA/IS-2000.5-C TTA: TTC: Upper Layer (Layer 3) Signaling for cdma2000 Spread Spectrum Systems Release C 6. Reserved 7. 3GPP2: C.S0017.2-0 v1.0 ARIB:

49、CWTS: TIA: TIA/EIA/IS-707.2-A TTA: TTC: Data Service Options for Spread Spectrum Systems: Radio Link Protocol 1-3 TIA-707.04-B 8. 3GPP2: C.S0017.3-A ARIB: CWTS: TIA: TIA-707.3-B TTA: TTC: Data Service Options for Spread Spectrum Systems: AT Command Processing and the Rm Interface 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 ANSI X3.4-1986 Coded Character Set 7-Bit American National Standard Code for Information Interchange, 1992. Bell 103 0-300 bps, 2-wire, full-duplex modem standard. Bell 212A 1200 bps, 2-wire, full-duplex modem standard.