1、 Access to Additional Content for TIA-804-C, Dated: February 2012 (Click here to view the publication) This Page is not part of the original publication This page has been added by IHS as a convenience to the user in order to provide access to additional content as authorized by the Copyright holder
2、 of this document Click the link(s) below to access the content and use normal procedures for downloading or opening the files. Additional Content - AntPat Information contained in the above is the property of the Copyright holder and all Notice of Disclaimer (b) there is no assurance that the Docum
3、ent will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rig
4、hts (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is reque
5、sted, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the pa
6、rties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. If the
7、 Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference consists of man
8、datory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragemen
9、t of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essential
10、Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES,
11、EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSL
12、Y DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMEN
13、T OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING
14、 DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELE
15、MENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. TIA-804-C ii Blank Page TIA-804-C iii TABLE OF CONTENTS DOCUMENT REVISION HISTORY. v FOREWORD . vii PATENT IDENTIFICATION . ix INTRODUCTION xi 1.0 Scope 1 2.0 Acronyms, Abbreviations, I
16、nitialisms 1 3.0 Requirements: Text-based Format 3 3.1 Overall Format . 3 3.2 Fields . 3 3.2.1 Field Characteristics 3 3.2.2 Field parameters described . 5 4.0 Requirements: XML Format 17 4.1 Definition of Format . 17 4.2 Application of Format 20 Annex A (Normative) Definition of Pattern Cut Geometr
17、ies . 21 A.1 General Definitions and Practices . 21 A.2 Horizontal/Vertical Pattern Geometry 22 A.3 Azimuth/Elevation Pattern Geometry 23 A.4 Spherical Pattern Geometry 25 A.5 Pattern Cut Designators (XXXX) . 26 Annex B (Normative) Definition of Polarization Designators . 27 Annex C (Informative) Ex
18、ample with Pattern Cut Data in Two-Column Format . 29 Annex D (Normative) Schema . 39 Annex E (Informative) Example Instance of *.XAP File . 45 Annex F (Informative) - Bibliography 49 TIA-804-C iv Blank Page TIA-804-C v DOCUMENT REVISION HISTORY Version Date Description IS-804 Issue O August 2001 Or
19、iginal release IS-804 Issue O-1 December 2002 Error Correction TIA-804 Issue A August 2004 5HPRYHG5(9$7 TIA-804 Issue B April 2008 Revised information on port-to-port isolation. Revised information on physical characteristics. Added ability to include polarization in pattern cut information. Added a
20、 field for passive intermodulation Added Table B-1 TIA-804 Issue B-1 December 2008 Made the following changes to add new XML-based format: Inserted new Section 4 ahead of existing Section 4 Added new Normative Annex D Added new Informative Annex E TIA-804 Issue C Incorporated the changes in Addendum
21、 B-1 TIA-804-C vi Blank Page TIA-804-C vii FOREWORD (This foreword is not part of this Standard.) This Standard was prepared by TIA Working Group TG-8.11.2 and has been approved by Subcommittee TR-8.11. Members of TR-45 have also reviewed and made comments on this document as it impacts antenna usag
22、e in the Mobile and Personal Communications field. National Spectrum Managers Association (NSMA) contributed to the preparation of the original issue of this document. Many of the requirements contained in this document are compatible with those of NSMA Recommendation WG16.99.050 dated 5/20/99. Howe
23、ver, caution is advised because differences may exist between the two documents. Annexes A, B, and D are normative. Annexes C and E are for information only. This is Revision C of this Standard and supersedes TIA -804-B and TIA-804-B-1. TIA-804-C viii Blank Page TIA-804-C ix PATENT IDENTIFICATION 7K
24、HUHDGHUVDWWHQWLRQLVFDOOHGWRWKHSRVVLELOLWWKDWFRPSOLDQFHZLWKWKLVGRFXPHQWmay require the use of one or more inventions covered by patent rights. By publication of this document no position is taken with respect to the validity of those claims or any patent rights in connection therewith. The patent hol
25、ders so far identified have, we believe, filed statements of willingness to grant licenses under those rights on reasonable and nondiscriminatory terms and conditions to applicants desiring to obtain such licenses. The following patent holders and patents have been identified in accordance with the
26、TIA intellectual property rights policy: - None identified TIA is not responsible for identifying patents for which licenses may be required by this document or for conducting inquiries into the legal validity or scope of those patents that are brought to its attention. TIA-804-C x Blank Page TIA-80
27、4-C xi INTRODUCTION This standard is intended to provide a standard format for manufacturers of antennas for the Terrestrial Land Mobile Radio industry to adhere to. It was motivated by the observation by propagation software providers (i.e. users of such patterns) that many manufacturers have propr
28、ietary formats and that a single standardized format would make software development simpler, assure consistent usage of antenna pattern data, and facilitate data accuracy through a robust, common data format. . TIA-804-C xii Blank PageTIA-804-C 1 Terrestrial Land Mobile Radio - Antenna Systems - St
29、andard Format for Digitized Antenna Patterns 1.0 Scope This document is standardizes the presentation of digitized antenna patterns for antenna systems in the terrestrial Land Mobile Radio Service. According to FCC Rules and Regulations 90.7, the Land Mobile Radio Service is defined as follows: A mo
30、bile service between base stations and land mobile stations, or between land mobile stations. 2.0 Acronyms, Abbreviations, Initialisms The following material defines acronyms, abbreviations, and initialisms used in this Standard: ASCII American Standard Code for Information Interchange CD - Compact
31、disc deg - Degree(s) kg - Kilogram(s) m - Meter(s) Opt - Optional Req - Required XML - Extensible markup language XSD - XML Schema definition (file) TIA-804-C 2 Blank PageTIA-804-C 3 - 3.0 Requirements: Text-based Format 3.1 Overall Format Each file consists of data for one antenna operating at one
32、or more frequencies. Each frequency consists of one or more pattern cuts. Each pattern cut consists of a number of data points. Only those fields marked with an “n“, or “x“ are required to be compliant to this standard; however, manufacturers are strongly encouraged to include all fields in their da
33、ta files. Data shall be entered into the file in the order given in this standard. It is not necessary, howeveUWRLQFOXGHHPSWILHOGV The format of the data that makes up the fields shall be ASCII text. 3.2 Fields 3.2.1 Field Characteristics The fields to be used in digitized antenna patterns for the T
34、errestrial Land Mobile Radio Services are defined in Table 1. They are described in detail in subclause 3.2.2. All data positions up to and including the decimal point (if appropriate for the data type) PXVWEHILOOHG7KHFRPPD VHUYHVDVDGDWDLWHPGHOLPLWHU3HU-line comments may be DGGHGWRDQUHFRUG,QDQUHFRUG
35、DOOGDWDDIWHUDFKDUDFWHUZLOOEHLJQRUHG The length of the field specified is the maximum allowable length of the record. If the format is free form, then the record may be shorter than the maximum length, and terminated with a carriage return and line feed characters. TIA-804-C 4 Table 1 Field Character
36、istics 5HTG“ Field Name Length Abbreviated Descriptive (Char) Name Clause x Revision Number 42 REVNUM: 3.2.2.1 Comment1 80 COMNT1 : 3.2.2.3 Comment2 80 COMNT2 : 3.2.2.4 x Antenna Manufacturer 42 ANTMAN: 3.2.2.5 x Model Number 42 MODNUM: 3.2.2.6 Pattern File Number 13 FILNUM: 3.2.2.7 Pattern ID Numbe
37、r 42 PATNUM: 3.2.2.8 Feed Orientation 13 FEDORN: 3.2.2.9 Description1 80 DESCR1: 3.2.2.10 Description2 80 DESCR2: 3.2.2.11 Description3 80 DESCR3: 3.2.2.12 Description4 80 DESCR4: 3.2.2.13 Description5 80 DESCR5: 3.2.2.14 Date of Data 16 DTDATA: 3.2.2.15 x Low Frequency (MHz) 21 LOWFRQ: 3.2.2.16 x H
38、igh Frequency (MHz) 21 HGHFRQ: 3.2.2.17 x Gain Units 15 GUNITS: 3.2.2.18 Low-band Gain 12 LWGAIN: 3.2.2.19 x Mid-band Gain 16 MDGAIN: 3.2.2.20 High-band Gain 12 HGGAIN: 3.2.2.21 x Az Bmwdth 17 AZWIDT: 3.2.2.22 El Bmwdth 16 ELWIDT: 3.2.2.23 Connector Type 80 CONTYP: 3.2.2.24 VSWR 13 ATVSWR: 3.2.2.25
39、Front-to-back Ratio(dB) 13 FRTOBA: 3.2.2.26 x Electrical Downtilt (deg) 16 ELTILT: 3.2.2.27 Radiation Center (m) 13 RADCTR: 3.2.2.28 Port-to-Port Iso (dB) 12 POTOPO: 3.2.2.29 Max Input Power (W) 17 MAXPOW: 3.2.2.30 Antenna Length (m) 14 ANTLEN: 3.2.2.31 Antenna Width (m) 14 ANTWID: 3.2.2.32 Antenna
40、Depth (m) 14 ANTDEP: 3.2.2.33 Antenna Weight (kg) 16 ANTWGT: 3.2.2.34 Future Field 80 FIELD1: 3.2.2.35 Future Field 80 FIELD2: 3.2.2.36 Future Field 80 FIELD3: 3.2.2.37 Antenna Passive IM 14 ANTPIM: 3.2.2.38 Pattern Cut Format 9 CUTFMT: 3.2.2.39 TIA-804-C 5 - Table 1 (concluded) 5HTG“ Field Name Len
41、gth Abbreviated Descriptive (Char) Name Clause x Pattern Type 16 PATTYP: 3.2.2.40 x # Freq This File 10 NOFREQ: 3.2.2.41 x Pattern Freq (MHz) 21 PATFRE: 3.2.2.42 x # Pattern Cuts 11 NUMCUT: 3.2.2.43 n Pattern Cut 12 PATCUT: 3.2.2.44 n Polarization 15 POLARI: 3.2.2.45 n # Data Points 13 NUPOIN: 3.2.2
42、.46 n First HJ7,$-804-C 3.2.2.2 Reserved TIA-804-C 6 3.2.2.3 Comments1 COMNT1:,XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXCRLF This is a field for comments on the current revision. 3.2.2.4 Comments2 COMNT2:,XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
43、XXXXXXXXCRLF This is a field for comments on the current revision. 3.2.2.5 Antenna Manufacturer ANTMAN:,XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXCRLF This is the name of the antenna manufacturer. This shall not be abbreviated. 3.2.2.6 Full Model Number MODNUM:,XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXCRLF This is
44、 the full model number as used when the data was taken. Modifiers to the model number such as dashes or exceptions shall be included. This should uniquely identify the antenna and allow for revisions to the data. 3.2.2.7 Pattern File Number FILNUM:,XX/XXCRLF For cases where more than one file is ass
45、ociated with a specific model number this field will contain the particular file number and the total number of files associated with that model number. TIA-804-C 7 - 3.2.2.8 Pattern ID Number PATNUM:,XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXCRLF This is the manufacturer assigned pattern ID number that may
46、 optionally be assigned to the pattern data. For USA sited terrestrial microwave antennas this is the NSMA ID number. 3.2.2.9 Feed Orientation FEDORN:,XXXXXCRLF For a terrestrial microwave antenna this is the orientation of the feed hook when looking from the back of the antenna in the direction of
47、the mechanical boresite. The standard orientaWLRQVDUHULJKWDQGOHIW 3.2.2.10 Description1 DESCR1:,XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXCRLF This is used to describe the antenna and its characteristics. 3.2.2.11 Description2 DESCR2:,XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
48、XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXCRLF This is used to describe the antenna and its characteristics. 3.2.2.12 Description3 DESCR3:,XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXCRLF This is used to describe the antenna and its characteristics. 3.2.2.13 Description4 DESCR4:,XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXCRLF This is used to describe the antenna and its chara
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1