TIA-826-A-2003 TIA EIA-41-D Based Pre-Paid Charging Enhancements for Circuit Switched Data and Short Message Services (Changes Only - Also See TIA EIA IS-826 1 TIA EIA IS-826 2 TIA.pdf

1、 TIA-826-A-2003 APPROVED: DECEMBER 1, 2003 REAFFIRMED: SEPTEMBER 19, 2013 TIA-826-A (Revision of TIA/EIA/IS-826) December 2003TIA/EIA-41-D Based Pre-Paid Charging Enhancements for Circuit Switched Data and Short Message Services NOTICE TIA Engineering Standards and Publications are designed to serve

2、 the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such

3、Standards and Publications shall not in any respect preclude any member or non-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, eithe

4、r domestically or internationally. Standards and Publications are adopted by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting th

5、e Standard or Publication. This Standard does not purport to address all safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of

6、 regulatory limitations before its use. (From Project No. PN-3-4760-RV1-RF1, formulated under the cognizance of the TIA TR-45 Mobile (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amende

7、d, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investiga

8、tion for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate o

9、r inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory

10、. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in th

11、e formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty o

12、r obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applicatio

13、ns shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Documen

14、t. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENT

15、S, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING

16、THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARI

17、SING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARR

18、ANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. TIA-826-A123

19、456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960Contents iPRE-PAID CHARGING ENHANCEMENTS FORCIRCUIT SWITCHED DATA AND SHORT MESSAGE SERVICESCONTENTSList of Figures.vList of TablesviRevision HistoryviiIntroduction.11 General.12 References13

20、Editorial Conventions.14Assumptions. 2IS-826 Chapter 2 Modifications.43 Definitions and Concepts.43.1 Definitions45 Wireless Intelligent Network Feature Descriptions.55.A Pre-Paid Charging (PPC).55.A.1 Normal Procedures with Successful Outcome55.A.2 Exception Procedures or Unsuccessful Outcome115.A.

21、3 Alternate Procedures.125.A.4Interactions With Other Network Services13IS-826Chapter 3 Modifications174Symbols and Abbreviations. 175 Network Reference Model.185.X Network Reference Model for Pre-Paid Charging Enhancements185.X.1 Interface Reference Points.185.X.1.1 Reference Point M4.185.X.2 Messa

22、ges Across Network Interfaces19IS-826 Chapter 4 Modifications.208 Wireless Intelligent Network (WIN Scenarios.208.8 Call Processing Resumption Point.208.X WIN Pre-Paid Charging Scenarios218.X.1 MS Registration.218.X.2 MS Call Origination: Calling Party Disconnect (SN Based)238.X.3 MS Call Originatio

23、n: Calling Party Disconnect248.X.4MS Call Origination: Calling Party Disconnect - No Pre-Call Announcement258.X.10 Three-Way Calling: Calling Party Disconnect26TIA-826-A123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960Contentsii8.X.13 Thr

24、ee-Way Calling: Insufficient Balance for Third-Party Call278.X.16 MS Call Origination with Abbreviated Dialing288.X.18 Abbreviated Dialing: Insufficient Balance for Call298.X.20 Call Origination: Charge Rate Dependent on MS Location.308.X.33 MS-to-MS Call: SN Based318.X.41 Circuit-Switched Data Serv

25、ices328.X.41.1 MS Circuit-Switched Data Call Origination: Called Party Disconnect.338.X.41.2 MS Circuit-Switched Data Call Origination: Mid-Call Notification of Low Balance.368.X.41.3 MS Circuit-Switched Data Call Origination: Service Logic Directed Call Release.408.X.41.4 Circuit-Switched Data Call

26、 Delivery: Intersystem Termination.448.X.41.5 SCP-Based Call Forwarding Busy on Call Collision508.X.41.6 SCP-Based Call Forwarding Busy on Circuit-Switched Data Call.578.X.42 Short Message Services628.X.42.1 PPC for MS-Originated Short Message Accepted by the Network.638.X.42.2 PPC for MS-Originated

27、 Short Message Delivered to Destination SME.668.X.42.3 PPC for MS-Originated Short Message Not Accepted by the Network.708.X.42.4 PPC for MS-Originated Short Message: Message Not Accepted by Destination SME.718.X.42.5 PPC for MS-Originated Short Message Purged by Originators Home MC738.X.42.6 PPC fo

28、r MS-Terminated Short Message Delivered to Subscriber 768.X.42.7 PPC for MS-Terminated Short Message Accepted by Home MC818.X.42.8 MS-Terminated Short Message Not Delivered: Low Balance828.X.42.9 MS-Terminated Short Message Not Delivered: MS Inaccessible 83IS-826 Chapter 5 Modifications.865 Data Tra

29、nsfer Services.865.1 SS7-Based Data Transfer Services866 Application Services866.4MAP Operations 866.4.1 General866.4.1.2 Operation Specifiers866.4.2 Operation Definitions866.4.2.13 FeatureRequest876.4.2.24 InterSystemPage896.4.2.30 OriginationRequest906.4.2.40 RoutingRequest.946.4.2.46 TransferToNu

30、mberRequest.976.4.2.51 UnsolicitedResponse.996.4.2.h ServiceRequest1016.4.2.i AnalyzedInformation106TIA-826-A123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960Contents iii6.4.2.m FacilitySelectedAndAvailable.1106.4.2.t TBusy.1126.4.2.u TNo

31、Answer1166.4.2.aa OAnswer1206.4.2.ad TAnswer.1226.4.2.ag OCalledPartyBusy1246.4.2.ag ONoAnswer.1266.4.2.ax ShortMessageAnalyzed1286.5 Map Parameters.1316.5.1 General1316.5.1.1 Parameter Identifiers1316.5.2 Parameter Definitions1326.5.2.2 ActionCode1326.5.2.97 Profile.1336.5.2.125 SMS_CauseCode.1346.

32、5.2.j TDMAServiceCode.1376.5.2.cu ResumePIC1386.5.2.dg TriggerList.1396.5.2.dj WINOperationsCapability.1406.5.2.hn SMS_BearerLength1416.5.2.ho SMS_BillingID1426.5.2.hp SMS_Event1436.5.2.hq SMS_EventNotification.1446.5.2.hr SMS_PendingMessageCount.1466.5.2.hs TriggerCriteria.147A ANNEX A: ASN.1 NOTAT

33、ION FOR WIN PARAMETERS148IS-826 Chapter 6 Modifications.1494Intersystem Procedures 1494.14 Feature Request1494.14.1 MSC Detecting Feature Request.1494.25 InterSystem Page.1524.25.2 MSC Receiving InterSystemPage INVOKE.1524.31 Origination Request.1544.31.1 MSC Initiating an Origination Request.1544.4

34、6 SMS Delivery Point-to-Point.1584.46.6 MC Receiving an SMSDeliveryPointToPoint INVOKE1584.46.7 Originating MC Supplementary Services1614.46.9 MC Initiating SMS Delivery Point-To-Point to an MS-Based SME1634.A Analyzed Information1654.A.1 MSC Initiating an Analyzed Information1654.E Facility Selecte

35、d And Available1684.E.1 MSC Initiating a Facility Selected And Available1684.M TBusy.1704.M.1 MSC Initiating a TBusy.1704.N TNoAnswer173TIA-826-A123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960Contentsiv4.N.1 MSC Initiating a TNoAnswer.1

36、734.U OAnswer1764.U.1 MSC Initiating an OAnswer.1764.W TAnswer1764.W.1 MSC Initiating a TAnswer1764.Z OCalledPartyBusy.1764.Z.1 MSC Initiating an OCalledPartyBusy.1764.AA ONoAnswer.1764.AA.1 MSC Initiating an ONoAnswer1764.XX Short Message Analyzed.1774.XX.1 MC Initiating Short Message Analyzed1774.

37、XX.2 SCF Receiving ShortMessageAnalyzed INVOKE.1787 Operation Timer Values180TIA-826-A123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960List of Figures vLIST OF FIGURESIntroductionIS-826 Chapter 2 ModificationsIS-826Chapter 3 Modifications

38、Figure X Network Reference Model for Pre-Paid Charging Enhancements18IS-826 Chapter 4 ModificationsFigure 8.8Call Processing Resumption Point.20Figure 1 MS Registration.21Figure 2 MS Circuit-Switched Data Call Origination: Called Party Disconnect.33Figure 3 MS Circuit-Switched Data Call Origination:

39、 Mid-Call Notification of Low Balance36Figure 4MS Circuit-Switched Data Call Origination: Service Logic Directed Call Release.40Figure 5 Circuit-Switched Data Call Delivery: Intersystem Termination.45Figure 6 SCP-Based Call Forwarding Busy on Call Collision (1 of 2).50Figure 7 SCP-Based Call Forward

40、ing Busy on Call Collision (2 of 2).55Figure 8 SCP-Based Call Forwarding Busy on Circuit-Switched Data Call (1 of 2)57Figure 9 SCP-Based Call Forwarding Busy on Circuit-Switched Data Call (2 of 2)61Figure 10 PPC for MS-Originated Short Message Accepted by the Network.63Figure 11 PPC for MS-Originate

41、d Short Message Delivered to Destination SME.66Figure 12 PPC for MS-Originated Short Message Not Accepted by the Network70Figure 13 PPC for MS-Originated Short Message: Message Not Accepted by Destination SME71Figure 14PPC for MS-Originated Short Message Purged by Originators Home MC.73Figure 15 PPC

42、 for MS-Terminated Short Message Delivered to Subscriber.76Figure 16 PPC for MS-Terminated Short Message Accepted by Home MC81Figure 17 MS-Terminated Short Message Not Delivered: Low Balance.82Figure 18 MS-Terminated Short Message Not Delivered: MS Inaccessible83IS-826 Chapter 5 ModificationsIS-826

43、Chapter 6 ModificationsTIA-826-A123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960List of TablesviLIST OF TABLESIntroductionIS-826 Chapter 2 ModificationsTable 1 PPC Subscription Options6IS-826Chapter 3 ModificationsTable X Message Interfa

44、ces.19IS-826 Chapter 4 ModificationsIS-826 Chapter 5 ModificationsTable 1 MTP Message Priority Values for TIA/EIA-41 Operations.86Table 8 TIA/EIA-41 MAP Operation Specifiers.86Table 10 Summary of MAP Operations86Table 11 NE Combinations for SM_ANLYZD128Table 12 TIA/EIA-41 MAP Parameter Identifiers13

45、1Table A-1 ASN.1 Notation for WIN Parameters.148IS-826 Chapter 6 ModificationsTable 1 SCF ShortMessageAnalyzed Response179Table 63 Operation Timer Values.180TIA-826-A123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960Revision History viiREV

46、ISION HISTORYRevision Date Remarks0 June 2000 Initial PublicationA December 2003TIA-826-A123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960Revision HistoryviiiThis page is intentionally left blank.TIA-826-A123456789101112131415161718192021

47、222324252627282930313233343536373839404142434445464748495051525354555657585960General 1 IntroductionINTRODUCTIONPre-Paid Charging (PPC) enables the subscriber to pay for telecommunication servicesprior to usage. This document presents a recommended plan for the implementation ofWireless Intelligent

48、Network (WIN) capabilities that support PPC for circuit-switched dataand short message services (SMS). The WIN capabilities that support PPC are for use inthe Wireless Radiotelephone Service.1 GENERALThis document describes the additions and modifications to TIA/EIA/IS-826, WirelessIntelligent Netwo

49、rk Capabilities for Pre-Paid Charging, to support circuit-switched dataand short message services.2REFERENCESThis document builds on the following American National Standards Institute (ANSI)standards:TIA/EIA-664 TIA/EIA-664-A, Wireless Features Description; TelecommunicationsIndustry Association; July 2000TIA/EIA-41 TIA/EIA-41-D, Cellular Radiotelecommunications IntersystemOperations; Telecommunications Industry Association;December 1997IS-737 TIA/EIA/IS-737, IS-41-CEnhancements for Circuit Mode Services;Telecommunications Industry Association; December 1997IS-807 TIA/EIA/IS-807, TIA/EI