1、 TIA-835-D-1E November 2011cdma2000Packet Data Network Standard NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and ass
2、isting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of TIA from manufacturing or selling products not conforming to such Standards
3、and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accordance with the American National Standards Institute (ANSI) patent policy. B
4、y such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems associated with its use or all applicable regulatory requirements. It is the
5、 responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Project No. 3-4732-RV4-AD1, formulated under the cognizance of the TIA TR-45 Mobile (b) there is no assurance that the
6、Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual propert
7、y rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is
8、requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to t
9、he parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. I
10、f the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference consists o
11、f mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encoura
12、gement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essen
13、tial Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANT
14、IES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXP
15、RESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DO
16、CUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCL
17、UDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTA
18、L ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. X.S0011-001-D v2.0 i Content 1 1 INTRODUCTION . 3 2 2 GLOSSARY AND DEFINITION 5 3 2.1 ACRONYMS 5 4 2.2 DEFINITIONS 7 5 3 REFERENCES 15 6 3.1 NORMATIVE REFERENCES 15 7 3.1.1 IETF 15
19、 8 3.1.2 3GPP2 AND TIA 19 9 3.1.3 ITU-T 19 10 3.2 INFORMATIVE REFERENCES . 20 11 3.2.1 3GPP2 AND TIA 20 12 4 PROTOCOL REFERENCE MODELS 21 13 4.1 NETWORK REFERENCE MODELS 21 14 4.2 SIMPLE IP 22 15 4.3 MIP4 23 16 4.4 MIP6 27 17 4.5 RADIUS 29 18 19 X.S0011-001-D v2.0 ii List of Figures 1 Figure 1 - Ref
20、erence Model for Simple IP Access with Fast Handoff . 21 2 Figure 2 - Reference Model for MIP Access with Fast Handoff 22 3 Figure 3 - Protocol Reference Model for Simple IP Access 23 4 Figure 4 - Protocol Reference Model for Simple IP Access During Fast Handoff 23 5 Figure 5 - Protocol Reference Mo
21、del for MIP4 Control and IKE . 24 6 Figure 6 - Protocol Reference Model for MIP4 User Data 24 7 Figure 7 - Protocol Reference Model for MIP4 Control and IKE During Fast Handoff 25 8 Figure 8 - Protocol Reference Model for MIP4 User Data During Fast Handoff . 25 9 Figure 9 - Protocol Reference Model
22、for Signaling for Fast Handoff 26 10 Figure 10 - Protocol Reference Model for User Data for Fast Handoff 26 11 Figure 11- Protocol Reference Model for MIP6 Control 27 12 Figure 12- Protocol Reference Model for MIP6 User Data with Bi-directional Tunneling . 27 13 Figure 13- Protocol Reference Model f
23、or MIP6 User Data in RO mode . 28 14 Figure 14- Protocol Reference Model for MIP6 Control during Fast Handoff . 28 15 Figure 15- Protocol Reference Model for MIP6 User Data with Bi-directional Tunneling during Fast 16 Handoff 29 17 Figure 16- Protocol Reference Model for MIP6 User Data in RO mode du
24、ring Fast Handoff 29 18 Figure 17 - RADIUS Protocol Reference Model . 30 19 20 21 X.S0011-001-D v2.0 iii List of Tables 1 Table 1- Revision History . 22 X.S0011-001-D v2.0 iv This page is left blank intentionally. 1 2 X.S0011-001-D v2.0 1 Revision History: 1 Revision Date Comments December 2000 Init
25、ial Publication Revision A May 2001 Added specification or clarification for the following items: New mechanism for PDSN/HA pre-shared secret distribution for IKE Security status is replaced by IKE Pre-shared Secret Request attribute New counters G15 and G16 for MIP signaling Clarifications with res
26、pect to counters G1 and G2 A new indicator in RADIUS stop message to indicate session still in progress (to avoid release of the IP address) Removal of RADIUS accounting fields H1, I2, and I3 New accounting session to be created when F1, F2 accounting fields vary Non-zero and zero IP address in IP C
27、onfiguration option in IPCP is treated as Simple IP by PDSN. MIP is supported with null IP address configuration option (i.e., not included). The Active Time attribute format changed from standard RADIUS encoding to 3GPP2 specific encoding. Revision B September 2002 This document has been revised to
28、 support the following features: Simultaneous multiple service instances concept introduced. RTP/UDP/IP Header Reduction Schemes Differentiated Services QoS Policy Fast handoff for data call (i.e., tunneled PPP between PDSNs) Dynamic Home Agent allocation with RADIUS Optional support for DNS server
29、address auto configuration in MS Always On support IP Reachability Service with dynamic DNS update Simple IPv6 Remote address based accounting Revision C August 2003 New format: the document is split into 6 chapters identified by YYYYY.xxx-C, where YYYY is the document number and xxx is the chapter
30、number. Multiple Service Instance support LLAROHC Header Compression and LLA Header Removal Enhanced CRTP as an additional compression scheme Dynamic flow mapping/treatment PrePaid Packet Data service (phase 1) PDSN/HA Resource management Accounting support for 1xEVDV Packet Data Inactivity Timer IK
31、E/IPsec clarifications IP Reachability enhancements Enhancements to Always On Enhancements to Simple IPv6 Revision B Version 2.0 September 2004 This is an addendum to correct errors and omissions in the Revision B Version 1.0 of this document. X.S0011-001-D v2.0 2 Revision D February 2006 IPv6 Mobil
32、ity Support for end-to-end QoS (MS-PDSN QoS signaling) Hot-lining MS-PDSN Version/Capabilities Indication Short Data Burst Indication Support RAN-PDSN Flow control Support DHCPv4 and DHCPv6 IP Reachability for MIPv6 Auxiliary Service Connection SO67 support. Revision D Version 2.0 April October 2008
33、 This is an addendum to correct errors in the Revision D Version 1.0 of this document. Table 1- Revision History1 X.S0011-001-D v2.0 3 1 Introduction 1 This document defines requirements for support of wireless packet data networking capability on 2 a third generation wireless system based on cdma20
34、001. This document supports the services 3 and architecture in 1. 4 This document defines the two methods for accessing public networks (Internet) and private 5 networks (intranets): Simple IP and MIP. It describes the required Quality of Service, Security, 6 Mobility Management, and Accounting capa
35、bilities needed to support both methods. IETF 7 protocols are widely employed whenever possible to minimize the number of new protocols 8 required and to maximize the utilization of well accepted standards. 9 This document is organized into a series of related chapters, some of which address capabil
36、ities 10 common to both IP access service types: MIP and Simple IP, and others may describe 11 capabilities applicable to a specific IP access service. The chapters included in this series are: 12 Chapter 1 cdma2000 Wireless IP Network Standard: Introduction. 13 Chapter 2 cdma2000 Wireless IP Networ
37、k Standard: Simple IP and MIP Access Services. 14 Chapter 3 cdma2000 Wireless IP Network Standard: Packet Data Mobility and Resource 15 Management. 16 Chapter 4 cdma2000 Wireless IP Network Standard: Quality of Service and Header 17 Reduction. 18 Chapter 5 cdma2000 Wireless IP Network Standard: Acco
38、unting Services and 3GPP2 19 RADIUS VSAs. 20 Chapter 6 cdma2000 Wireless IP Network Standard: PrePaid Packet Data Service. 21 In this set of documents we refer to other documents in the set strictly by their chapter numbers 22 as in Chapter 1. 23 Chapter 1 This chapter presents an overview of the do
39、cument content, and contains the 24 complete glossary and definitions applicable to all the chapters. It describes the 25 network and protocol reference models for the wireless IP Network entities: 26 PDSN, HA and RADIUS server. 27 Chapter 2 This chapter describes the basic IP access services: Simpl
40、e IPv4/IPv6, MIP6 28 and MIP4 with Dynamic Home Agent, and Home IP address Assignment. It also 29 addresses the security requirements between the Wireless IP Network nodes: 30 PDSN, HA and RADIUS servers. The chapter includes other capabilities such 31 as Always On, multiple simultaneous MIP4/IPv6 a
41、nd Simple IPv4/IPv6 packet 32 data session, IP Reachability Service, DHCP support and Hot-Lining. 33 Chapter 3 This chapter describes packet data intra-PDSN, inter-PDSN handoff as well as 34 inter-PDSN fast handoff capabilities and the RAN requirements. The chapter 35 includes mechanisms for PDSN an
42、d HA resource management and provisioning 36 of dormancy timers in the RAN. This chapter also includes support for RAN-37 PDSN Flow Control and Short Data Burst indication. 38 1 cdma2000 is the trademark for the technical nomenclature for certain specifications and standards of the Organizational Pa
43、rtners (OPs) of 3GPP2. Geographically (and as of the date of publication), cdma2000 is a registered trademark of the Telecommunications Industry Association (TIA-USA) in the United States. X.S0011-001-D v2.0 4 Chapter 4 This chapter describes user Differentiated services capability, multiple service
44、 1 connections, flow mapping and treatment, and MS-PDSN QoS signaling. The 2 chapter also includes a detailed description of Link Layer Assisted Robust 3 Header compression and Header Removal treatment to support Voice over IP 4 Service over an auxiliary service connection. In addition, this chapter
45、 adds 5 Auxiliary Service Connection SO67 support that allows for the efficient transport 6 of IP packets from the PDSN to the RAN without HDLC-like framing and PPP 7 encapsulation. 8 Chapter 5 This chapter describes source IP address and remote IP address based 9 accounting and detailed procedures
46、required for this series of standards. It also 10 includes a description of the 3GPP2 RADIUS VSAs required to support this 11 series of standards. 12 Chapter 6 This chapter describes the PrePaid Packet Data Service for the Wireless IP 13 Network users and includes the PrePaid service architecture, t
47、he detailed 14 procedures and the requirements on the Wireless IP Network elements. 15 16 “Shall” and “shall not” identify requirements to be followed strictly to conform to this document 17 and from which no deviation is permitted. “Should” and “should not” indicate that one of several 18 possibili
48、ties is recommended as particularly suitable, without mentioning or excluding others, that 19 a certain course of action is preferred but not necessarily required, or that (in the negative form) a 20 certain possibility or course of action is discouraged but not prohibited. “May” and “need not” 21 i
49、ndicate a course of action permissible within the limits of the document. “Can” and “cannot” are 22 used for statements of possibility and capability, whether material, physical or causal. 23 .24 X.S0011-001-D v2.0 5 2 Glossary and Definition 1 2.1 Acronyms 2 A10 RAN-PDSN Interface 3 AAA Authentication, Authorization, and Accounting 4 ACCM Asynchronous Control Character Map 5 AH Authentication Header 6 AVP Attribute Value Pair 7 BA Binding Acknowledgement 8 BU Binding Update 9 BCE Binding Cache Entry 10 BCMCS Broadcast and Multicast Service 11 BS Base Station 12 CA Certif
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1