TIA-856 100-C-1-2011 Introduction to cdma2000 High Rate Packet Data Air Interface Specification (Incorporates Addendum to TIA-856 100-C).pdf

1、 TIA-856.100-C-1 November 2011Introduction to cdma2000 High Rate Packet Data Air Interface Specification NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeabi

2、lity and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of TIA from manufacturing or selling p

3、roducts not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accordance with the American National St

4、andards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems associated with its use or all appl

5、icable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Project No. TIA-PN -856.100-C-1, formulated under the cognizance of the TIA TR

6、-45 Mobile (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Docume

7、nt may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs atte

8、ntion, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing te

9、rms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied wi

10、th as respects the Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or

11、 otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such No

12、rmative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not consti

13、tute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance

14、with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIR

15、D PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS O

16、R ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPEC

17、IAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE

18、 FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. 3GPP2 C.S0024-100-C v2.0 Revision History Revision Description of Changes Date 1.0 Initial Publication April 2010 2.0 Point Release Pu

19、blication July 2011 3GPP2 C.S0024-100-C v2.0 i CONTENTS 1 FOREWORD . ix 2 REFERENCES xi 3 1 Overview . 1-1 4 1.1 Scope of This Document 1-1 5 1.2 Requirements Language . 1-1 6 1.3 Architecture Reference Model . 1-1 7 1.4 Protocol Architecture . 1-2 8 1.4.1 Layers 1-2 9 1.5 Physical Layer Channels 1-

20、3 10 1.6 Protocols . 1-4 11 1.6.1 Interfaces . 1-4 12 1.6.2 States 1-5 13 1.6.3 InUse and InConfiguration Protocol/Application Instances 1-6 14 1.6.3.1 InConfiguration Instantiation 1-6 15 1.6.3.1.1 Protocol Instantiation 1-6 16 1.6.3.1.2 Application Instantiation . 1-6 17 1.6.3.2 Protocol Initializ

21、ation 1-6 18 1.6.3.3 Procedures and Messages . 1-6 19 1.6.3.3.1 Commit Procedures 1-7 20 1.6.4 Common Commands 1-7 21 1.6.5 Protocol Negotiation . 1-7 22 1.6.6 Protocol Overview . 1-7 23 1.7 Default Applications 1-11 24 1.8 Streams . 1-12 25 1.9 Sessions and Connections 1-12 26 1.10 Security . 1-12

22、27 1.11 Terms 1-12 28 1.12 Notation 1-17 29 1.13 Malfunction Detection 1-18 30 1.14 CDMA System Time . 1-18 31 1.15 Revision Number . 1-21 32 3GPP2 C.S0024-100-C v2.0 ii 2 Common Algorithms and Data Structures . 2-1 1 2.1 Channel Record . 2-1 2 2.2 Access Terminal Identifier Record 2-2 3 2.3 Attribu

23、te Record 2-2 4 2.4 Hash Function 2-4 5 2.5 Pseudorandom Number Generator . 2-5 6 2.5.1 General Procedures . 2-5 7 2.5.2 Initialization 2-5 8 2.6 Sequence Number Validation . 2-5 9 2.7 Generic Configuration Protocol 2-6 10 2.7.1 Introduction 2-6 11 2.7.2 Procedures 2-6 12 2.7.2.1 Configuration Negot

24、iation . 2-6 13 2.7.3 Message Formats . 2-7 14 2.7.3.1 ConfigurationRequest. 2-7 15 2.7.3.2 ConfigurationResponse 2-8 16 2.8 Session State Information Record 2-8 17 2.9 SectorID Provisioning 2-11 18 2.9.1 Overview of Relevant Formats 2-11 19 2.9.1.1 Global Unicast IPv6 Address Format . 2-11 20 2.9.1

25、.2 Site-Local Unicast IPv6 Address Format . 2-11 21 2.9.1.3 Link-Local Unicast IPv6 Address Format 2-11 22 2.9.1.4 Reserved IPv6 Address Format . 2-12 23 2.9.1.5 Modified EUI-64 Format . 2-12 24 2.9.2 SectorID Construction . 2-13 25 2.9.2.1 Construction of Globally Unique SectorID . 2-13 26 2.9.2.1.

26、1 SectorID Based On an IPv6 Unique Identifier 2-13 27 2.9.2.1.2 SectorID Not Based On an IPv6 Unique Identifier 2-14 28 2.9.2.1.2.1 ANSI-41 Method . 2-15 29 2.9.2.1.2.2 GSM/UMTS Method . 2-15 30 2.9.2.1.2.3 IPv4 Unique Identifier . 2-16 31 2.9.2.2 Construction of Locally Unique SectorID . 2-16 32 3G

27、PP2 C.S0024-100-C v2.0 iii 2.10 Generic Attribute Update Protocol 2-16 1 2.10.1 Introduction . 2-16 2 2.10.2 Procedures . 2-17 3 2.10.2.1 Initiator Requirements 2-17 4 2.10.2.2 Responder Requirements 2-17 5 2.10.3 Message Formats . 2-18 6 2.10.3.1 AttributeUpdateRequest . 2-18 7 2.10.3.2 AttributeUp

28、dateAccept 2-18 8 2.10.3.3 AttributeUpdateReject 2-19 9 2.10.4 Protocol Numeric Constants . 2-19 10 2.11 Linear Interpolation . 2-20 11 2.12 Bi-linear Interpolation 2-21 12 2.13 IIR filter implementation 2-22 13 2.14 ReverseCDMAChannel Record 2-22 14 3 Assigned Names And Numbers 3-1 15 3.1 Protocols

29、 . 3-1 16 17 18 3GPP2 C.S0024-100-C v2.0 iv This page intentionally left blank 1 3GPP2 C.S0024-100-C v2.0 v FIGURES 1 Figure 1.3-1. Architecture Reference Model . 1-2 2 Figure 1.4.1-1. Air Interface Layering Architecture 1-2 3 Figure 1.5-1. Forward Channel Structure . 1-3 4 Figure 1.5-2. Reverse Cha

30、nnel Structure 1-4 5 Figure 1.6.6-1. Default Protocols 1-8 6 Figure 1.6.6-2. Non-Default Protocols . 1-9 7 Figure 1.14-1. CDMA System Time Line 1-20 8 Figure 2.9.1.1-1. Global Unicast IPv6 Address Format . 2-11 9 Figure 2.9.1.2-1. Site-Local Unicast IPv6 Address Format . 2-11 10 Figure 2.9.1.3-1. Li

31、nk-Local Unicast IPv6 Address Format. 2-12 11 Figure 2.9.1.4-1. Format of the Reserved IPv6 Addresses . 2-12 12 Figure 2.9.1.4-2. IPv6 Values That Are to be Avoided . 2-12 13 Figure 2.9.1.5-1. Universally Unique Modified EUI-64 . 2-13 14 Figure 2.9.1.5-2. Locally Unique Modified EUI-64 . 2-13 15 Fig

32、ure 2.9.2.1.2-1. “S” bits in the Site-Local Unicast IPv6 Address Format . 2-14 16 Figure 2.9.2.1.2-2. “S” bits in the Link-Local Unicast IPv6 Address Format 2-14 17 Figure 2.9.2.1.2-3. “S” bits in the Reserved IPv6 Address Format . 2-14 18 Figure 2.9.2.1.2-4. sub-fields of the “S” bits 2-14 19 Figur

33、e 2.9.2.1.2.1-1. Assignment of the “T” Bits, the “N” Bits, and the “X” Bits for 20 the ANSI-41 Method 2-15 21 Figure 2.9.2.1.2.2-1. Assignment of the “T” Bits, the “N” Bits, and the “X” Bits for 22 the GSM/UMTS Method 2-15 23 Figure 2.9.2.1.2.3-1. Assignment of the “T” Bits, the “N” Bits, and the “X

34、” Bits for 24 the IPv4 Method 2-16 25 Figure 2.9.2.2-1. Format of the Locally Unique SectorID 2-16 26 27 28 3GPP2 C.S0024-100-C v2.0 vi This page intentionally left blank. 1 3GPP2 C.S0024-100-C v2.0 vii TABLES 1 Table 2.1-1. SystemType Encoding . 2-1 2 Table 2.2-1. ATIType Field Encoding . 2-2 3 Tab

35、le 2.8-1. The Format of the Session State Information Record 2-9 4 Table 2.8-2. Encoding of the ParameterType Field . 2-10 5 Table 2.14-1. SystemType Encoding 2-23 6 Table 3.1-1. Protocol Type and Subtypes . 3-2 7 8 3GPP2 C.S0024-100-C v2.0 viii This page intentionally left blank. 1 3GPP2 C.S0024-10

36、0-C v2.0 ix FOREWORD 1 (This foreword is not part of this Standard) 2 This standard was prepared by Technical Specification Group C of the Third Generation 3 Partnership Project 2 (3GPP2). This standard is evolved from and is a companion to the 4 cdma20001 standards. This air interface standard prov

37、ides Overview part of the high rate 5 packet data air interface. Other parts of this standard are: 6 Physical Layer for cdma2000 High Rate Packet Data Air Interface Specification 7 Medium Access Control Layer for cdma2000 High Rate Packet Data Air Interface 8 Specification 9 Connection and Security

38、Layers for cdma2000 High Rate Packet Data Air Interface 10 Specification 11 Application, Stream and Session Layers for cdma2000 High Rate Packet Data Air 12 Interface Specification 13 14 15 1 “cdma2000 is the trademark for the technical nomenclature for certain specifications and standards of the Or

39、ganizational Partners (OPs) of 3GPP2. Geographically (and as of the date of publication), cdma2000 is a registered trademark of the Telecommunications Industry Association (TIA-USA) in the United States.” 3GPP2 C.S0024-100-C v2.0 x This page intentionally left blank. 1 3GPP2 C.S0024-100-C v2.0 xi RE

40、FERENCES 1 The following documents contain provisions, which, through reference in this text, 2 constitute provisions of this document. References are either specific (identified by date of 3 publication, edition number, version number, etc.) or non-specific. For a specific reference, 4 subsequent r

41、evisions do not apply. For a non-specific reference, the latest version applies. 5 In the case of a reference to a 3GPP2 document, a non-specific reference implicitly refers to 6 the latest version of that document in the same Release as the present document. 7 8 1 Reserved. 9 2 C.S0024-200-C, Physi

42、cal Layer for cdma2000 High Rate Packet Data Air Interface 10 Specification. 11 3 C.S0024-300-C, Medium Access Control Layer for cdma2000 High Rate Packet 12 Data Air Interface Specification. 13 4 C.S0024-400-C, Connection and Security Layers for cdma2000 High Rate Packet 14 Data Air Interface Speci

43、fication. 15 5 C.S0024-500-C, Application, Stream and Session Layers for cdma2000 High Rate 16 Packet Data Air Interface Specification. 17 6 P.S0001, Wireless IP Network Standard. 18 7 C.S0002, Physical Layer Standard for cdma2000 Spread Spectrum Systems. 19 8 C.S0005, Upper Layer (Layer 3) Signalin

44、g Specification for cdma2000 Spread 20 Spectrum Systems. 21 9 C.S0032, Recommended Minimum Performance Standards for cdma2000 High 22 Rate Packet Data Access Network. 23 10 C.S0033, Recommended Minimum Performance Standards for cdma2000 High 24 Rate Packet Data Access Terminal. 25 11 FIPS PUB 180-1,

45、 Federal Information Processing Standards Publication 180-1. 26 12 Internet Engineering Task Force (IETF) RFC 2409, The Internet Key Exchange 27 (IKE). 28 13 A.S0009, Interoperability Specification (IOS) for High Rate Packet Data (HRPD) 29 Access Network Interfaces. 30 14 A.S0008, Interoperability S

46、pecification (IOS) for High Rate Packet Data (HRPD) 31 Access Network Interfaces. 32 15 C.R1001, Administration of Parameter Value Assignments for cdma2000 Spread 33 Spectrum Standards. (Informative) 34 16 IETF RFC 2373, IP Version 6 Addressing Architecture. 35 17 ITU-T Recommendation E.212, Identif

47、ication Plan for Land Mobile Stations, 1988. 36 18 IETF RFC 3056, Connection of IPv6 Domains via IPv4 Clouds, February 2001. 37 3GPP2 C.S0024-100-C v2.0 xii 19 C.S0054, cdma2000 High Rate Broadcast-Multicast Packet Data Air Interface 1 Specification. 2 20 C.S0057, Band Class Specification for cdma20

48、00 Spread Spectrum Systems. 3 21 C.S0004, Signaling Link Access Control (LAC) standard for cdma2000 Spread 4 Spectrum Systems. 5 22 IETF RFC 1662, PPP in HDLC-like Framing. 6 23 X.S0011, cdma2000 Wireless IP Network Standard. 7 24 C.S0072, Mobile Station Equipment Identifier (MEID) Support for cdma2

49、000 8 Spread Spectrum Systems. 9 25 C.S0063, cdma2000 High Rate Packet Data Supplemental Services. 10 3GPP2 C.S0024-100-C v2.0 1-1 1 OVERVIEW 1 1.1 Scope of This Document 2 These technical requirements form a compatibility standard for cdma2000 high rate packet 3 data systems. These requirements ensure that a compliant access terminal can obtain 4 service through any access network conforming to this standard. These requirements do 5 not address the quality or reliability of that service, nor do they cover equipment 6 performance