1、 TIA-856.200-C-1 February 2012Physical Layer for cdma2000 High Rate Packet Data Air Interface Specification NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchange
2、ability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of TIA from manufacturing or sellin
3、g products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accordance with the American National
4、 Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems associated with its use or all a
5、pplicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Project No. TIA-PN -856.200-C-1, formulated under the cognizance of the TIA
6、 TR-45 Mobile (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Doc
7、ument may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs a
8、ttention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing
9、 terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied
10、 with as respects the Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation
11、 or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such
12、 Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not con
13、stitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of complian
14、ce with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY T
15、HIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENT
16、S OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, S
17、PECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
18、THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. 3GPP2 C.S0024-200-C v2.0 Revision History Revision Description of Changes Date v1.0 Initial publication April 2010 v2.0 Point relea
19、se July 2011 v2.0 Post publication clean up for editorial issues December 2011 3GPP2 C.S0024-200-C v2.0 i CONTENTS 1 FOREWORD . liii 2 REFERENCES . lv 3 1 Default (Subtype 0) and Subtype 1 Physical Layer Protocol . 1-1 4 1.1 Default (Subtype 0) and Subtype 1 Physical Layer Protocol Instance 1-1 5 1.
20、1.1 Overview 1-1 6 1.1.2 Primitives and Public Data. 1-1 7 1.1.2.1 Commands 1-1 8 1.1.2.2 Return Indications 1-1 9 1.1.2.3 Public Data . 1-1 10 1.1.3 Protocol Data Unit 1-1 11 1.1.4 Protocol Initialization 1-1 12 1.1.4.1 Protocol Initialization for the InConfiguration Protocol Instance 1-1 13 1.1.4.
21、2 Protocol Initialization for the InUse Protocol Instance of the Subtype 1 14 Physical Layer Protocol . 1-2 15 1.1.5 Procedures and Messages for the InConfiguration Instance of the Protocol 1-2 16 1.1.5.1 Procedures 1-2 17 1.1.5.2 Commit Procedures 1-2 18 1.1.5.3 Message Formats 1-2 19 1.1.5.3.1 Con
22、figurationRequest 1-2 20 1.1.5.3.2 ConfigurationResponse 1-3 21 1.1.6 Procedures and Messages for the InUse Instance of the Protocol . 1-4 22 1.1.6.1 Procedures 1-4 23 1.1.6.2 Message Formats 1-4 24 1.1.6.3 Interface to Other Protocols . 1-4 25 1.1.6.3.1 Commands . 1-4 26 1.1.6.3.2 Indications 1-4 2
23、7 1.1.7 Configuration Attributes 1-4 28 1.1.8 Protocol Numeric Constants 1-4 29 1.1.8.1 Protocol Numeric Constants for the Default (Subtype 0) Physical Layer 30 Protocol . 1-4 31 1.1.8.2 Protocol Numeric Constants for the Subtype 1 Physical Layer Protocol 1-4 32 1.1.9 Session State Information 1-4 3
24、3 3GPP2 C.S0024-200-C v2.0 ii 1.2 Physical Layer Packets . 1-5 1 1.2.1 Overview 1-5 2 1.2.2 Physical Layer Packet Formats 1-5 3 1.2.2.1 Control Channel Physical Layer Packet Format 1-5 4 1.2.2.2 Access Channel Physical Layer Packet Format . 1-5 5 1.2.2.3 Forward Traffic Channel Physical Layer Packet
25、 Format . 1-7 6 1.2.2.4 Reverse Traffic Channel Physical Layer Packet Format 1-8 7 1.2.3 Bit Transmission Order 1-9 8 1.2.4 Computation of the FCS Bits . 1-9 9 1.3 Access Terminal Requirements 1-11 10 1.3.1 Transmitter . 1-11 11 1.3.1.1 Frequency Parameters 1-11 12 1.3.1.1.1 Frequency Tolerance 1-11
26、 13 1.3.1.2 Power Output Characteristics 1-11 14 1.3.1.2.1 Output Power Requirements of Reverse Channels 1-11 15 1.3.1.2.1.1 Access Channel Output Power 1-11 16 1.3.1.2.1.2 Reverse Traffic Channel Output Power . 1-11 17 1.3.1.2.2 Maximum Output Power 1-11 18 1.3.1.2.3 Output Power Limits 1-12 19 1.3
27、1.2.3.1 Minimum Controlled Output Power 1-12 20 1.3.1.2.3.2 Standby Output Power. 1-12 21 1.3.1.2.4 Controlled Output Power . 1-12 22 1.3.1.2.4.1 Estimated Open-Loop Output Power. 1-12 23 1.3.1.2.4.2 Closed-Loop Output Power 1-14 24 1.3.1.2.5 Power Transition Characteristics. 1-14 25 1.3.1.2.5.1 Op
28、en-Loop Estimation . 1-14 26 1.3.1.2.5.2 Closed-Loop Correction 1-15 27 1.3.1.3 Modulation Characteristics 1-15 28 1.3.1.3.1 Reverse Channel Structure 1-15 29 1.3.1.3.1.1 Modulation Parameters 1-21 30 1.3.1.3.1.2 Data Rates 1-22 31 1.3.1.3.2 Access Channel 1-23 32 3GPP2 C.S0024-200-C v2.0 iii 1.3.1.
29、3.3 Reverse Traffic Channel . 1-24 1 1.3.1.3.3.1 Pilot Channel 1-24 2 1.3.1.3.3.2 Data Channel . 1-24 3 1.3.1.3.3.3 Pilot Channel 1-25 4 1.3.1.3.3.4 Reverse Rate Indicator Channel 1-25 5 1.3.1.3.3.5 Data Rate Control Channel 1-26 6 1.3.1.3.3.6 ACK Channel 1-29 7 1.3.1.3.3.7 Data Channel . 1-29 8 1.3
30、1.3.4 Encoding. 1-30 9 1.3.1.3.4.1 Reverse Link Encoder Structure and Parameters . 1-30 10 1.3.1.3.4.2 Turbo Encoding 1-30 11 1.3.1.3.4.2.1 Turbo Encoders 1-31 12 1.3.1.3.4.2.2 Turbo Code Termination 1-31 13 1.3.1.3.4.2.3 Turbo Interleavers 1-33 14 1.3.1.3.5 Channel Interleaving 1-37 15 1.3.1.3.6 S
31、equence Repetition . 1-37 16 1.3.1.3.7 Orthogonal Covers 1-38 17 1.3.1.3.8 Quadrature Spreading . 1-38 18 1.3.1.3.8.1 Access Terminal Common Short-Code PN Sequences 1-39 19 1.3.1.3.8.2 Long Codes . 1-40 20 1.3.1.3.8.3 Baseband Filtering . 1-42 21 1.3.1.4 Close d-Loop Power-Control Operation. 1-43 22
32、 1.3.1.5 Reception of the DRCLock Channel. 1-44 23 1.3.1.6 Synchronization and Timing 1-44 24 1.4 Access Network Requirements . 1-45 25 1.4.1 Transmitter . 1-45 26 1.4.1.1 Frequency Parameters 1-45 27 1.4.1.1.1 Frequency Tolerance 1-45 28 1.4.1.2 Power Output Characteristics 1-45 29 1.4.1.3 Modulati
33、on Characteristics 1-45 30 1.4.1.3.1 Forward Channel Structure . 1-45 31 1.4.1.3.1.1 Modulation Parameters 1-50 32 3GPP2 C.S0024-200-C v2.0 iv 1.4.1.3.1.2 Data Rates 1-52 1 1.4.1.3.2 Forward Link Channels 1-52 2 1.4.1.3.2.1 Pilot Channel 1-52 3 1.4.1.3.2.1.1 Modulation . 1-52 4 1.4.1.3.2.1.2 Orthogo
34、nal Spreading 1-52 5 1.4.1.3.2.1.3 Quadrature Spreading . 1-52 6 1.4.1.3.2.2 Forward MAC Channel. 1-53 7 1.4.1.3.2.2.1 Reverse Power Control Channel 1-53 8 1.4.1.3.2.2.2 DRCLock Channel 1-54 9 1.4.1.3.2.2.3 Reverse Activity Channel . 1-55 10 1.4.1.3.2.3 Forward Traffic Channel 1-55 11 1.4.1.3.2.3.1
35、Forward Traffic Channel Preamble 1-55 12 1.4.1.3.2.3.2 Encoding 1-56 13 1.4.1.3.2.3.2.1 Turbo Encoder . 1-57 14 1.4.1.3.2.3.2.2 Turbo Interleaver . 1-60 15 1.4.1.3.2.3.3 Scrambling . 1-64 16 1.4.1.3.2.3.4 Channel Interleaving 1-65 17 1.4.1.3.2.3.4.1 Symbol Reordering. 1-65 18 1.4.1.3.2.3.4.2 Symbol
36、Permuting . 1-66 19 1.4.1.3.2.3.5 Modulation . 1-67 20 1.4.1.3.2.3.5.1 QPSK Modulation. 1-67 21 1.4.1.3.2.3.5.2 8-PSK Modulation 1-68 22 1.4.1.3.2.3.5.3 16-QAM Modulation 1-69 23 1.4.1.3.2.3.6 Sequence Repetition and Symbol Puncturing . 1-71 24 1.4.1.3.2.3.7 Symbol Demultiplexing 1-72 25 1.4.1.3.2.3
37、8 Walsh Channel Assignment. 1-73 26 1.4.1.3.2.3.9 Walsh Channel Scaling 1-73 27 1.4.1.3.2.3.10 Walsh Chip Level Summing. 1-73 28 1.4.1.3.2.4 Control Channel . 1-73 29 1.4.1.3.3 Time-Division Multiplexing 1-73 30 1.4.1.3.4 Quadrature Spreading . 1-76 31 1.4.1.3.5 Filtering 1-77 32 3GPP2 C.S0024-200-
38、C v2.0 v 1.4.1.3.5.1 Baseband Filtering . 1-77 1 1.4.1.3.5.2 Phase Characteristics 1-79 2 1.4.1.3.6 Synchronization and Timing 1-80 3 1.4.1.3.6.1 Timing Reference Source . 1-80 4 1.4.1.3.6.2 Sector Transmission Time . 1-80 5 2 Subtype 2 Physical Layer . 2-1 6 2.1 Subtype 2 Physical Layer Protocol In
39、stance 2-1 7 2.1.1 Overview 2-1 8 2.1.2 Primitives and Public Data. 2-1 9 2.1.2.1 Commands 2-1 10 2.1.2.2 Return Indications 2-1 11 2.1.2.3 Public Data . 2-1 12 2.1.3 Protocol Data Unit 2-1 13 2.1.4 Protocol Initialization 2-1 14 2.1.4.1 Protocol Initialization for the InConfiguration Protocol Insta
40、nce 2-1 15 2.1.5 Procedures and Messages for the InConfiguration Instance of the Protocol 2-2 16 2.1.5.1 Procedures 2-2 17 2.1.5.2 Commit Procedures 2-2 18 2.1.5.3 Message Formats 2-3 19 2.1.5.3.1 ConfigurationRequest 2-3 20 2.1.5.3.2 ConfigurationResponse 2-3 21 2.1.6 Procedures and Messages for th
41、e InUse Instance of the Protocol . 2-4 22 2.1.6.1 Procedures 2-4 23 2.1.6.2 Message Formats 2-4 24 2.1.6.2.1 AttributeUpdateRequest. 2-4 25 2.1.6.2.2 AttributeUpdateAccept . 2-4 26 2.1.6.2.3 AttributeUpdateReject 2-5 27 2.1.6.3 Interface to Other Protocols . 2-5 28 2.1.6.3.1 Commands . 2-5 29 2.1.6.
42、3.2 Indications 2-5 30 2.1.7 Configuration Attributes 2-5 31 2.1.7.1 Simple Attributes 2-5 32 3GPP2 C.S0024-200-C v2.0 vi 2.1.7.2 Complex Attributes. 2-6 1 2.1.8 Protocol Numeric Constants 2-6 2 2.1.9 Session State Information 2-7 3 2.2 Physical Layer Packets . 2-8 4 2.2.1 Overview 2-8 5 2.2.2 Physi
43、cal Layer Packet Formats 2-8 6 2.2.2.1 Control Channel Physical Layer Packet Format 2-8 7 2.2.2.2 Access Channel Physical Layer Packet Format . 2-9 8 2.2.2.3 Forward Traffic Channel Physical Layer Packet Format . 2-10 9 2.2.2.4 Reverse Traffic Channel Physical Layer Packet Format 2-10 10 2.2.3 Bit T
44、ransmission Order 2-11 11 2.2.4 Computation of the FCS Bits . 2-11 12 2.3 Access Terminal Requirements 2-13 13 2.3.1 Transmitter . 2-13 14 2.3.1.1 Frequency Parameters 2-13 15 2.3.1.1.1 Frequency Tolerance 2-13 16 2.3.1.2 Power Output Characteristics 2-13 17 2.3.1.2.1 Output Power Requirements of Re
45、verse Channels 2-13 18 2.3.1.2.1.1 Access Channel Output Power 2-13 19 2.3.1.2.1.2 Reverse Traffic Channel Output Power . 2-13 20 2.3.1.2.2 Maximum Output Power 2-13 21 2.3.1.2.3 Output Power Limits 2-14 22 2.3.1.2.3.1 Minimum Controlled Output Power 2-14 23 2.3.1.2.3.2 Standby Output Power. 2-14 24
46、 2.3.1.2.4 Controlled Output Power . 2-14 25 2.3.1.2.4.1 Estimated Open-Loop Output Power. 2-14 26 2.3.1.2.4.2 Closed-Loop Output Power 2-16 27 2.3.1.2.5 Power Transition Characteristics. 2-17 28 2.3.1.2.5.1 Open-Loop Estimation . 2-17 29 2.3.1.2.5.2 Closed-Loop Correction 2-18 30 2.3.1.3 Modulation
47、 Characteristics 2-18 31 2.3.1.3.1 Reverse Channel Structure 2-18 32 3GPP2 C.S0024-200-C v2.0 vii 2.3.1.3.1.1 Modulation Parameters 2-28 1 2.3.1.3.1.2 Data Rates 2-30 2 2.3.1.3.2 Access Channel 2-31 3 2.3.1.3.2.1 Pilot Channel 2-32 4 2.3.1.3.2.2 Data Channel . 2-32 5 2.3.1.3.3 Reverse Traffic Channe
48、l . 2-32 6 2.3.1.3.3.1 Pilot Channel 2-33 7 2.3.1.3.3.2 Reverse Rate Indicator Channel 2-33 8 2.3.1.3.3.3 Data Source Control Channel 2-34 9 2.3.1.3.3.4 Data Rate Control Channel 2-36 10 2.3.1.3.3.5 ACK Channel 2-39 11 2.3.1.3.3.6 Data Channel . 2-40 12 2.3.1.3.3.7 Auxiliary Pilot Channel 2-41 13 2.
49、3.1.3.4 Encoding. 2-41 14 2.3.1.3.4.1 Reverse Link Encoder Structure and Parameters . 2-41 15 2.3.1.3.4.2 Turbo Encoding 2-43 16 2.3.1.3.4.2.1 Turbo Encoders 2-43 17 2.3.1.3.4.2.2 Turbo Code Termination 2-44 18 2.3.1.3.4.2.3 Turbo Interleavers 2-46 19 2.3.1.3.5 Scrambling for Reverse Traffic Channel Physical Layer Packets 2-50 20 2.3.1.3.6 Channel Interleaving for Access Channel Physical Layer Packets 2-51 21 2.3.1.3.7 Channel Interleaving for Reverse Traffic Channel Physical Layer 22 Packets . 2-52 23 2.3.1.3.7.1 Symbol Reordering . 2-52 24 2.3.1.3.7.2 Matrix Interleaving . 2-53 25 2.3
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1