TIA-856-A-1[E]-2007 cdma2000 High Rate Packet Data Air Interface Specification - Addendum 1 Incorporated Addendum 1《CDMA2000高速分组数据空中接口规范-合并修订1》.pdf

1、 TIA STANDARD cdma2000High Rate Packet Data Air Interface Specification Addendum 1 TIA-856-A-1E (Addendum to TIA-856-A) February 2007 TELECOMMUNICATIONS INDUSTRY ASSOCIATION The Telecommunications Industry Association represents the communications sector of Copyright Telecommunications Industry Asso

2、ciation Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, fac

3、ilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of TIA from ma

4、nufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accordance with

5、the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems associated

6、with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Project No. 3-4875-RV1-AD1E, formulated under the cogn

7、izance of the TIA TR-45 Mobile (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of con

8、tents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and

9、 called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions

10、 of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual h

11、ave been complied with as respects the Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specificatio

12、n, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance rel

13、ating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other

14、SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any c

15、laims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFR

16、INGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFEC

17、TS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA

18、 SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION

19、, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS

20、 WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-856-A-1E CONTENTS i FOREWORDlxxxv 1 NOTES .lxxxvi 2 REFERENCESlxxxvi

21、 3 1 Overview .1-1 4 1.1 Scope of This Document1-1 5 1.2 Requirements Language 1-1 6 1.3 Architecture Reference Model 1-11-2 7 1.4 Protocol Architecture.1-2 8 1.4.1 Layers1-2 9 1.5 Physical Layer Channels1-3 10 1.6 Protocols .1-4 11 1.6.1 Interfaces 1-4 12 1.6.2 States 1-5 13 1.6.3 InUse and InConfi

22、guration Protocol/Application Instances1-6 14 1.6.3.1 InConfiguration Instantiation.1-6 15 1.6.3.1.1 Protocol Instantiation.1-6 16 1.6.3.1.2 Application Instantiation1-6 17 1.6.3.2 Protocol Initialization .1-6 18 1.6.3.3 Procedures and Messages 1-61-7 19 1.6.3.3.1 Commit Procedures1-7 20 1.6.4 Commo

23、n Commands .1-7 21 1.6.5 Protocol Negotiation.1-7 22 1.6.6 Protocol Overview 1-71-8 23 1.7 Default Applications 1-111-12 24 1.8 Streams. 1-121-13 25 1.9 Sessions and Connections. 1-121-13 26 1.10 Security. 1-121-13 27 1.11 Terms 1-121-13 28 1.12 Notation 1-161-17 29 1.13 Malfunction Detection . 1-17

24、1-18 30 1.14 CDMA System Time. 1-171-19 31 1.15 Revision Number . 1-201-21 32 Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-856-A-1E CONTENTS ii 2 Default Signaling Applic

25、ation2-1 1 2.1 Introduction2-1 2 2.1.1 General Overview 2-1 3 2.1.2 Public Data .2-1 4 2.1.3 Data Encapsulation for the InUse Instance of the Signaling Application 2-1 5 2.2 Protocol Initialization 2-3 6 2.2.1 Protocol Initialization for the InConfiguration Application Instance2-3 7 2.2.2 Protocol I

26、nitialization for the InUse Application Instance.2-3 8 2.3 General Signaling Requirements .2-3 9 2.3.1 General Requirements.2-3 10 2.3.2 Message Information .2-4 11 2.4 Procedures and Messages for the InConfiguration Instance of the Signaling 12 Application2-5 13 2.4.1 Procedures 2-5 14 2.4.2 Commit

27、 Procedures.2-5 15 2.4.3 Message Formats 2-6 16 2.4.3.1 ConfigurationRequest2-6 17 2.4.3.2 ConfigurationResponse2-6 18 2.5 Signaling Network Protocol2-7 19 2.5.1 Overview .2-7 20 2.5.2 Primitives and Public Data 2-7 21 2.5.2.1 Commands2-7 22 2.5.2.2 Return Indications.2-7 23 2.5.3 Protocol Data Unit

28、.2-7 24 2.5.4 Procedures and Messages for the InUse Instance of the Protocol .2-8 25 2.5.4.1 Procedures 2-8 26 2.5.4.2 Type Definitions.2-8 27 2.5.4.3 Messages.2-9 28 2.5.4.4 SNP Header 2-102-10 29 2.5.4.5 Interface to Other Protocols .2-10 30 2.5.4.5.1 Commands 2-10 31 2.5.4.5.2 Indications.2-10 32

29、 Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-856-A-1E CONTENTS iii 2.6 Signaling Link Protocol 2-122-12 1 2.6.1 Overview 2-122-12 2 2.6.2 Primitives and Public Data. 2-1

30、22-12 3 2.6.2.1 Commands 2-122-12 4 2.6.2.2 Return Indications. 2-122-12 5 2.6.3 Protocol Data Unit . 2-122-12 6 2.6.4 Procedures 2-122-12 7 2.6.4.1 Reset . 2-122-12 8 2.6.4.2 Delivery Layer Procedures 2-132-13 9 2.6.4.2.1 General Procedures 2-132-13 10 2.6.4.2.1.1 Transmitter Requirements 2-132-13

31、11 2.6.4.2.1.2 Receiver Requirements . 2-132-13 12 2.6.4.2.2 Best Effort Delivery Procedures 2-132-13 13 2.6.4.2.2.1 Transmitter Requirements 2-132-13 14 2.6.4.2.2.2 Receiver Requirements . 2-132-13 15 2.6.4.2.3 Reliable Delivery Procedures 2-132-13 16 2.6.4.2.3.1 Overview 2-132-13 17 2.6.4.2.3.2 In

32、itialization. 2-142-14 18 2.6.4.2.3.3 Data Transfer . 2-142-14 19 2.6.4.2.3.3.1 Transmit Procedures 2-142-14 20 2.6.4.2.3.3.2 Receive Procedures. 2-152-15 21 2.6.4.3 Fragmentation Layer Procedures 2-162-16 22 2.6.4.3.1 Overview 2-162-16 23 2.6.4.3.2 Initialization. 2-162-16 24 2.6.4.3.3 Data Transfe

33、r. 2-162-16 25 2.6.4.3.4 Sender Requirements. 2-172-17 26 2.6.4.3.5 Receiver Requirements. 2-172-17 27 2.6.5 Header Formats. 2-182-18 28 2.6.5.1 SLP-F Header. 2-182-18 29 2.6.5.2 SLP-D Header 2-192-19 30 2.6.6 Message Formats. 2-202-20 31 2.6.6.1 Reset . 2-202-20 32 Copyright Telecommunications Indu

34、stry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-856-A-1E CONTENTS iv 2.6.6.2 ResetAck 2-202-20 1 2.6.6.3 Protocol Numeric Constants .2-212-21 2 2.6.7 Interface to Other Protocols2-212-21 3 2.6.7.1 Commands.

35、2-212-21 4 2.6.7.2 Indications .2-212-21 5 2.7 Configuration Attributes for the Default Signaling Application .2-212-21 6 2.8 Session State Information 2-212-21 7 3 Default Packet Application3-1 8 3.1 Introduction3-1 9 3.1.1 General Overview 3-1 10 3.1.2 Public Data .3-1 11 3.1.3 Data Encapsulation

36、for the InUse Instance of the Application .3-1 12 3.2 Protocol Initialization 3-2 13 3.2.1 Protocol Initialization for the InConfiguration Application Instance3-2 14 3.3 Procedures and Messages for the InConfiguration Instance of the Packet 15 Application.3-23-3 16 3.3.1 Procedures .3-23-3 17 3.3.2

37、Commit Procedures.3-3 18 3.3.3 Message Formats 3-3 19 3.3.3.1 ConfigurationRequest3-3 20 3.3.3.2 ConfigurationResponse3-4 21 3.4 Radio Link Protocol .3-5 22 3.4.1 Overview .3-5 23 3.4.2 Primitives and Public Data 3-5 24 3.4.2.1 Commands3-5 25 3.4.2.2 Return Indications.3-5 26 3.4.3 Protocol Data Uni

38、t.3-5 27 3.4.4 Procedures and Messages for the InUse Instance of the Protocol .3-5 28 3.4.4.1 Procedures 3-5 29 3.4.4.1.1 Initialization and Reset 3-5 30 3.4.4.1.1.1 Initialization Procedure 3-6 31 3.4.4.1.1.2 Reset Procedure.3-6 32 Copyright Telecommunications Industry Association Provided by IHS u

39、nder license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-856-A-1E CONTENTS v 3.4.4.1.1.2.1 Reset Procedure for the Initiating Side3-6 1 3.4.4.1.1.2.2 Reset Procedure for the Responding Side3-6 2 3.4.4.1.2 Data Transfer.3-7 3 3.4.4.1.2.1 RLP Transmit

40、 Procedures .3-7 4 3.4.4.1.2.2 RLP Receive Procedures .3-8 5 3.4.4.2 RLP Packet Header 3-9 6 3.4.4.3 Message Formats .3-9 7 3.4.4.3.1 Reset3-9 8 3.4.4.3.2 ResetAck3-9 9 3.4.4.3.3 Nak3-10 10 3.4.4.4 Interface to Other Protocols .3-11 11 3.4.4.4.1 Commands.3-11 12 3.4.4.4.2 Indications.3-11 13 3.4.4.5

41、 RLP Packet Priorities3-11 14 3.4.5 Protocol Numeric Constants 3-11 15 3.5 Location Update Protocol.3-12 16 3.5.1 Overview3-12 17 3.5.2 Primitives and Public Data.3-12 18 3.5.2.1 Commands 3-12 19 3.5.2.2 Return Indications.3-12 20 3.5.3 Protocol Data Unit .3-12 21 3.5.4 Procedures and Messages for t

42、he InUse Instance of the Protocol3-12 22 3.5.4.1 Procedures.3-12 23 3.5.4.1.1 Access Network Requirements3-12 24 3.5.4.1.2 Access Terminal Requirements.3-12 25 3.5.4.2 Message Formats .3-13 26 3.5.4.2.1 LocationRequest.3-13 27 3.5.4.2.2 LocationNotification .3-13 28 3.5.4.2.3 LocationAssignment.3-14

43、 29 3.5.4.2.4 LocationComplete 3-15 30 3.5.4.3 Interface to Other Protocols .3-15 31 3.5.4.3.1 Commands.3-15 32 Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-856-A-1E CONT

44、ENTS vi 3.5.4.3.2 Indications.3-15 1 3.6 Flow Control Protocol .3-163-17 2 3.6.1 Overview 3-163-17 3 3.6.2 Primitives and Public Data .3-163-17 4 3.6.2.1 Commands.3-163-17 5 3.6.2.2 Return Indications3-173-18 6 3.6.3 Protocol Data Unit3-173-18 7 3.6.4 Procedures and Messages for the InUse Instance o

45、f the Protocol 3-173-18 8 3.6.4.1 Procedures .3-173-18 9 3.6.4.1.1 Transmission and Processing of DataReady Message 3-173-18 10 3.6.4.1.2 Close State .3-173-18 11 3.6.4.1.2.1 Access Terminal Requirements .3-173-18 12 3.6.4.1.2.2 Access Network Requirements 3-173-18 13 3.6.4.1.3 Open State3-183-19 14

46、 3.6.4.1.3.1 Access Terminal Requirements .3-183-19 15 3.6.4.1.3.2 Access Network Requirements 3-183-19 16 3.6.4.2 Message Formats3-183-19 17 3.6.4.2.1 XonRequest 3-183-19 18 3.6.4.2.2 XonResponse3-193-20 19 3.6.4.2.3 XoffRequest 3-193-20 20 3.6.4.2.4 XoffResponse 3-193-20 21 3.6.4.2.5 DataReady3-20

47、3-21 22 3.6.4.2.6 DataReadyAck 3-203-21 23 3.6.5 Interface to Other Protocols3-203-21 24 3.6.5.1 Commands.3-203-21 25 3.6.5.2 Indications .3-213-22 26 3.6.6 Protocol Numeric Constants .3-213-22 27 3.7 Configuration Attributes for the Default Packet Application .3-223-23 28 3.8 Session State Informat

48、ion 3-223-23 29 3.8.1 Location Parameter 3-223-23 30 3.8.2 FlowControlState Parameter.3-233-24 31 4 Multi-Flow Packet Application.4-1 32 Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from

49、IHS-,-,-TIA-856-A-1E CONTENTS vii 4.1 Introduction 4-1 1 4.1.1 General Overview.4-1 2 4.1.2 Public Data4-1 3 4.1.3 Data Encapsulation for the InUse Instance of the Application4-1 4 4.2 Protocol Initialization.4-2 5 4.2.1 Protocol Initialization for the InConfiguration Application Instance4-2 6 4.3 Procedures and