TIA-856-A-2004 cdma2000 High Rate Packet Data Air Interface Specification《CDMA2000高速分组数据空中接口规范》.pdf

1、 TIA DOCUMENT cdma2000 High Rate Packet Data Air Interface Specification TIA-856-A (Revision of TIA/EIA/IS-856) APRIL 2004 TELECOMMUNICATIONS INDUSTRY ASSOCIATION The Telecommunications Industry Association represents the communications sector of Copyright Telecommunications Industry Association Pro

2、vided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating i

3、nterchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Publications shall not in any respect preclude any member or non-member of TIA from manufacturing or selling pr

4、oducts not conforming to such Publications. Neither shall the existence of such Documents preclude their voluntary use by non-TIA members, either domestically or internationally. TIA DOCUMENTS TIA Documents contain information deemed to be of technical value to the industry, and are published at the

5、 request of the originating Committee without necessarily following the rigorous public review and resolution of comments which is a procedural part of the development of a American National Standard (ANS). Further details of the development process are available in the TIA Engineering Manual, locat

6、ed at http:/www.tiaonline.org/standards/sfg/engineering_manual.cfm TIA Documents shall be reviewed on a five year cycle by the formulating Committee and a decision made on whether to reaffirm, revise, withdraw, or proceed to develop an American National Standard on this subject. Suggestions for revi

7、sion should be directed to: Standards & Technology Department, Telecommunications Industry Association, 2500 Wilson Boulevard, Arlington, VA 22201 U.S.A. (From Project No. 3-4875-RV2, formulated under the cognizance of the TIA TR-45.5 Subcommittee on Spread Spectrum Digital Technology.) Published by

8、 TELECOMMUNICATIONS INDUSTRY ASSOCIATION 2004 Standards & Technology Department 2500 Wilson Boulevard Arlington, VA 22201 U.S.A. PRICE: Please refer to current Catalog of TIA TELECOMMUNICATIONS INDUSTRY ASSOCIATION STANDARDS AND ENGINEERING PUBLICATIONS or call Global Engineering Documents, USA and

9、Canada (1-800-854-7179) International (303-397-7956) or search online at http:/www.tiaonline.org/standards/search_n_order.cfm All rights reserved Printed in U.S.A. Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking perm

10、itted without license from IHS-,-,-NOTICE OF DISCLAIMER AND LIMITATION OF LIABILITY The document to which this Notice is affixed (the “Document”) has been prepared by one or more Engineering Committees or Formulating Groups of the Telecommunications Industry Association (“TIA”). TIA is not the autho

11、r of the Document contents, but publishes and claims copyright to the Document pursuant to licenses and permission granted by the authors of the contents. TIA Engineering Committees and Formulating Groups are expected to conduct their affairs in accordance with the TIA Engineering Manual (“Manual”),

12、 the current and predecessor versions of which are available at http:/www.tiaonline.org/standards/sfg/engineering_manual.cfm. TIAs function is to administer the process, but not the content, of document preparation in accordance with the Manual and, when appropriate, the policies and procedures of t

13、he American National Standards Institute (“ANSI”). TIA does not evaluate, test, verify or investigate the information, accuracy, soundness, or credibility of the contents of the Document. In publishing the Document, TIA disclaims any undertaking to perform any duty owed to or for anyone. The use or

14、practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications

15、are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA does not enforce or mon

16、itor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL W

17、ARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NON-INFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND

18、MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE

19、 FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHET

20、HER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLIS

21、HED BY TIA WITHOUT SUCH LIMITATIONS. Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-PLEASE! DONT VIOLATE THE LAW! This document is copyrighted by the TIA and may not be reprodu

22、ced without prior permission of the Telecommunications Industry Association. For information consult our website at http:/www.tiaonline.org/about/faqDetail.cfm?id=18 Organizations may obtain permission to reproduce a limited number of copies through entering into a license agreement. For information

23、, contact: Global Engineering Documents 15 Inverness Way East Englewood, CO 80112-5704 U.S.A. or call U.S.A. and Canada 1-800-854-7179, International (303) 397-7956 Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking per

24、mitted without license from IHS-,-,-TIA-856-A CONTENTS i FOREWORD lxxxi 1 NOTES lxxxii 2 REFERENCES lxxxii 3 1 Overview .1-1 4 1.1 Scope of This Document .1-1 5 1.2 Requirements Language .1-1 6 1.3 Architecture Reference Model.1-2 7 1.4 Protocol Architecture 1-2 8 1.4.1 Layers1-2 9 1.5 Physical Laye

25、r Channels.1-3 10 1.6 Protocols .1-4 11 1.6.1 Interfaces 1-4 12 1.6.2 States 1-5 13 1.6.3 InUse and InConfiguration Protocol/Application Instances .1-6 14 1.6.3.1 InConfiguration Instantiation .1-6 15 1.6.3.1.1 Protocol Instantiation1-6 16 1.6.3.1.2 Application Instantiation.1-6 17 1.6.3.2 Protocol

26、Initialization 1-7 18 1.6.3.3 Procedures and Messages .1-7 19 1.6.3.3.1 Commit Procedures .1-7 20 1.6.4 Common Commands.1-7 21 1.6.5 Protocol Negotiation 1-7 22 1.6.6 Protocol Overview1-8 23 1.7 Default Applications1-12 24 1.8 Streams.1-13 25 1.9 Sessions and Connections1-13 26 1.10 Security.1-13 27

27、 1.11 Terms 1-13 28 1.12 Notation 1-17 29 1.13 Malfunction Detection 1-18 30 1.14 CDMA System Time 1-18 31 1.15 Revision Number.1-21 32 Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from I

28、HS-,-,-TIA-856-A CONTENTS ii 2 Default Signaling Application .2-1 1 2.1 Introduction2-1 2 2.1.1 General Overview2-1 3 2.1.2 Public Data .2-1 4 2.1.3 Data Encapsulation for the InUse Instance of the Signaling Application .2-1 5 2.2 Protocol Initialization2-3 6 2.2.1 Protocol Initialization for the In

29、Configuration Application Instance.2-3 7 2.2.2 Protocol Initialization for the InUse Application Instance.2-3 8 2.3 General Signaling Requirements 2-3 9 2.3.1 General Requirements 2-3 10 2.3.2 Message Information.2-4 11 2.4 Procedures and Messages for the InConfiguration Instance of the Signaling 12

30、 Application2-5 13 2.4.1 Procedures 2-5 14 2.4.2 Commit Procedures.2-5 15 2.4.3 Message Formats 2-6 16 2.4.3.1 ConfigurationRequest .2-6 17 2.4.3.2 ConfigurationResponse.2-6 18 2.5 Signaling Network Protocol.2-7 19 2.5.1 Overview .2-7 20 2.5.2 Primitives and Public Data2-7 21 2.5.2.1 Commands2-7 22

31、2.5.2.2 Return Indications 2-7 23 2.5.3 Protocol Data Unit.2-7 24 2.5.4 Procedures and Messages for the InUse Instance of the Protocol.2-8 25 2.5.4.1 Procedures 2-8 26 2.5.4.2 Type Definitions2-8 27 2.5.4.3 Messages.2-9 28 2.5.4.4 SNP Header.2-10 29 2.5.4.5 Interface to Other Protocols 2-10 30 2.5.4

32、.5.1 Commands 2-10 31 2.5.4.5.2 Indications 2-10 32 Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-856-A CONTENTS iii 2.6 Signaling Link Protocol .2-11 1 2.6.1 Overview2-11

33、 2 2.6.2 Primitives and Public Data2-11 3 2.6.2.1 Commands 2-11 4 2.6.2.2 Return Indications 2-11 5 2.6.3 Protocol Data Unit.2-11 6 2.6.4 Procedures 2-11 7 2.6.4.1 Reset .2-11 8 2.6.4.2 Delivery Layer Procedures.2-12 9 2.6.4.2.1 General Procedures.2-12 10 2.6.4.2.1.1 Transmitter Requirements.2-12 11

34、 2.6.4.2.1.2 Receiver Requirements2-12 12 2.6.4.2.2 Best Effort Delivery Procedures.2-12 13 2.6.4.2.2.1 Transmitter Requirements.2-12 14 2.6.4.2.2.2 Receiver Requirements2-12 15 2.6.4.2.3 Reliable Delivery Procedures.2-12 16 2.6.4.2.3.1 Overview2-12 17 2.6.4.2.3.2 Initialization 2-13 18 2.6.4.2.3.3

35、Data Transfer.2-13 19 2.6.4.2.3.3.1 Transmit Procedures2-13 20 2.6.4.2.3.3.2 Receive Procedures2-14 21 2.6.4.3 Fragmentation Layer Procedures 2-15 22 2.6.4.3.1 Overview2-15 23 2.6.4.3.2 Initialization 2-15 24 2.6.4.3.3 Data Transfer.2-15 25 2.6.4.3.4 Sender Requirements2-16 26 2.6.4.3.5 Receiver Req

36、uirements2-16 27 2.6.5 Header Formats.2-17 28 2.6.5.1 SLP-F Header 2-17 29 2.6.5.2 SLP-D Header2-18 30 2.6.6 Message Formats 2-19 31 2.6.6.1 Reset .2-19 32 Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted wi

37、thout license from IHS-,-,-TIA-856-A CONTENTS iv 2.6.6.2 ResetAck .2-19 1 2.6.6.3 Protocol Numeric Constants .2-20 2 2.6.7 Interface to Other Protocols 2-20 3 2.6.7.1 Commands2-20 4 2.6.7.2 Indications 2-20 5 2.7 Configuration Attributes for the Default Signaling Application2-20 6 2.8 Session State

38、Information.2-20 7 3 Default Packet Application .3-23 8 3.1 Introduction3-23 9 3.1.1 General Overview3-23 10 3.1.2 Public Data .3-23 11 3.1.3 Data Encapsulation for the InUse Instance of the Application.3-23 12 3.2 Protocol Initialization3-24 13 3.2.1 Protocol Initialization for the InConfiguration

39、Application Instance.3-24 14 3.2.2 Protocol Initialization for the InUse Application Instance.3-24 15 3.3 Procedures and Messages for the InConfiguration Instance of the Packet 16 Application3-25 17 3.3.1 Procedures 3-25 18 3.3.2 Commit Procedures.3-25 19 3.3.3 Message Formats 3-25 20 3.3.3.1 Config

40、urationRequest .3-25 21 3.3.3.2 ConfigurationResponse.3-26 22 3.4 Radio Link Protocol.3-27 23 3.4.1 Overview .3-27 24 3.4.2 Primitives and Public Data3-27 25 3.4.2.1 Commands3-27 26 3.4.2.2 Return Indications 3-27 27 3.4.3 Protocol Data Unit.3-27 28 3.4.4 Procedures and Messages for the InUse Instan

41、ce of the Protocol.3-27 29 3.4.4.1 Procedures 3-27 30 3.4.4.1.1 Initialization and Reset .3-27 31 3.4.4.1.1.1 Initialization Procedure .3-28 32 Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without licens

42、e from IHS-,-,-TIA-856-A CONTENTS v 3.4.4.1.1.2 Reset Procedure.3-28 1 3.4.4.1.1.2.1 Reset Procedure for the Initiating Side3-28 2 3.4.4.1.1.2.2 Reset Procedure for the Responding Side3-28 3 3.4.4.1.2 Data Transfer.3-28 4 3.4.4.1.2.1 RLP Transmit Procedures 3-29 5 3.4.4.1.2.2 RLP Receive Procedures

43、3-29 6 3.4.4.2 RLP Packet Header3-31 7 3.4.4.3 Message Formats.3-31 8 3.4.4.3.1 Reset3-31 9 3.4.4.3.2 ResetAck3-31 10 3.4.4.3.3 Nak 3-32 11 3.4.4.4 Interface to Other Protocols 3-32 12 3.4.4.4.1 Commands 3-32 13 3.4.4.4.2 Indications.3-33 14 3.4.4.5 RLP Packet Priorities .3-33 15 3.4.5 Protocol Nume

44、ric Constants3-33 16 3.5 Location Update Protocol 3-34 17 3.5.1 Overview3-34 18 3.5.2 Primitives and Public Data3-34 19 3.5.2.1 Commands 3-34 20 3.5.2.2 Return Indications 3-34 21 3.5.3 Protocol Data Unit.3-34 22 3.5.4 Procedures and Messages for the InUse Instance of the Protocol.3-34 23 3.5.4.1 Pr

45、ocedures 3-34 24 3.5.4.1.1 Access Network Requirements 3-34 25 3.5.4.1.2 Access Terminal Requirements .3-34 26 3.5.4.2 Message Formats.3-35 27 3.5.4.2.1 LocationRequest3-35 28 3.5.4.2.2 LocationNotification.3-35 29 3.5.4.2.3 LocationAssignment 3-36 30 3.5.4.2.4 LocationComplete3-37 31 3.5.4.3 Interf

46、ace to Other Protocols 3-37 32 Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-856-A CONTENTS vi 3.5.4.3.1 Commands 3-37 1 3.5.4.3.2 Indications 3-37 2 3.6 Flow Control Prot

47、ocol3-39 3 3.6.1 Overview .3-39 4 3.6.2 Primitives and Public Data3-40 5 3.6.2.1 Commands3-40 6 3.6.2.2 Return Indications 3-40 7 3.6.3 Protocol Data Unit.3-40 8 3.6.4 Procedures and Messages for the InUse Instance of the Protocol.3-40 9 3.6.4.1 Procedures 3-40 10 3.6.4.1.1 Transmission and Processi

48、ng of DataReady Message .3-40 11 3.6.4.1.2 Close State 3-40 12 3.6.4.1.2.1 Access Terminal Requirements .3-40 13 3.6.4.1.2.2 Access Network Requirements 3-40 14 3.6.4.1.3 Open State 3-41 15 3.6.4.1.3.1 Access Terminal Requirements .3-41 16 3.6.4.1.3.2 Access Network Requirements 3-41 17 3.6.4.2 Mess

49、age Formats 3-41 18 3.6.4.2.1 XonRequest.3-41 19 3.6.4.2.2 XonResponse.3-42 20 3.6.4.2.3 XoffRequest .3-42 21 3.6.4.2.4 XoffResponse.3-42 22 3.6.4.2.5 DataReady.3-43 23 3.6.4.2.6 DataReadyAck.3-43 24 3.6.5 Protocol Numeric Constants .3-43 25 3.7 Configuration Attributes for the Default Packet Application 3-45 26 3.8 Session State Information.3-45 27 3.8.1 Location Parameter .3-45 28 3.8.2 FlowCo