TIA-856-B-1-2012 cdma2000 High Rate Packet Data Air Interface Specification (Incorporating Addendum 1 to TIA-856-B)《Cdma2000高速率分组数据空中接口规范 包含补充件1至TIA-856-B》.pdf

1、 TIA-856-B-1E February 2012cdma2000High Rate Packet Data Air Interface Specification NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement

2、 of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of TIA from manufacturing or selling products not conformi

3、ng to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accordance with the American National Standards Institute (A

4、NSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems associated with its use or all applicable regulatory re

5、quirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Project No. 3-4875-RV2-AD1, formulated under the cognizance of the TIA TR-45 Mobile (b) there is n

6、o assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of

7、 intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from t

8、he holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which

9、are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Docume

10、nt or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such

11、 reference consists of mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) T

12、IAs policy of encouragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TI

13、A of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the

14、Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PRO

15、PERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE

16、REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQ

17、UENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DA

18、MAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. C.S0024-B v2.0 Revision History Revision Description of Changes Date Rev 0 v2.0 Initial publication Oct 2000 Rev 0 v3.0 Point release Dec 2001 Rev 0 v4.0 Point

19、 release Oct 2002 Rev A v1.0 Initial publication April 2004 Rev A v2.0 Point release Aug 2005 Rev A v3.0 Point release Sept 2006 Rev B v1.0 Initial publication June 2006 Rev B v2.0 Point release Rev B v2.0 Republication text. This version fixes a problem in Table 12.4.1.3.2.3.5.4-1, 64-QAM Modulatio

20、n Table, where the top 16 rows and column headings were missing. The corresponding figure, Figure 12.4.1.3.2.3.5.4-1, Signal Constellation for 64-QAM Modulation, correctly showed the signal constellation. While fixing this table a few minor formatting issues were also corrected in the document. Rev

21、B v2.0 Republication text version of C.S0024-B Version 2.0. This version fixes editorial problem in section 9.4.6.1.4.1.2 and Table 14.1-1. March 2007 Rev B v2.0 Republication text version of C.S0024-B Version 2.0. This version fixes change mark coloring issues and the lost symbols in 9.4.6.1.4.1.2.

22、 February 2012 3GPP2 C.S0024-B v2.0 CONTENTS i FOREWORD cv 1 NOTES . cvi 2 REFERENCES cvi 3 1 Overview . 1-1 4 1.1 Scope of This Document . 1-1 5 1.2 Requirements Language . 1-1 6 1.3 Architecture Reference Model . 1-1 7 1.4 Protocol Architecture 1-2 8 1.4.1 Layers 1-2 9 1.5 Physical Layer Channels

23、1-3 10 1.6 Protocols 1-4 11 1.6.1 Interfaces . 1-4 12 1.6.2 States 1-5 13 1.6.3 InUse and InConfiguration Protocol/Application Instances 1-6 14 1.6.3.1 InConfiguration Instantiation 1-6 15 1.6.3.1.1 Protocol Instantiation 1-6 16 1.6.3.1.2 Application Instantiation . 1-6 17 1.6.3.2 Protocol Initializ

24、ation 1-6 18 1.6.3.3 Procedures and Messages . 1-7 19 1.6.3.3.1 Commit Procedures . 1-7 20 1.6.4 Common Commands 1-7 21 1.6.5 Protocol Negotiation . 1-7 22 1.6.6 Protocol Overview . 1-8 23 1.7 Default Applications . 1-12 24 1.8 Streams . 1-13 25 1.9 Sessions and Connections 1-13 26 1.10 Security . 1

25、-13 27 1.11 Terms 1-13 28 1.12 Notation. 1-17 29 1.13 Malfunction Detection 1-19 30 1.14 CDMA System Time . 1-19 31 1.15 Revision Number 1-21 32 3GPP2 C.S0024-B v2.0 CONTENTS ii 2 Default Signaling Application 2-1 1 2.1 Introduction 2-1 2 2.1.1 General Overview . 2-1 3 2.1.2 Public Data 2-1 4 2.1.3

26、Data Encapsulation for the InUse Instance of the Signaling Application 2-1 5 2.2 Protocol Initialization . 2-3 6 2.2.1 Protocol Initialization for the InConfiguration Application Instance 2-3 7 2.2.2 Protocol Initialization for the InUse Application Instance . 2-3 8 2.3 General Signaling Requirement

27、s 2-3 9 2.3.1 General Requirements . 2-3 10 2.3.2 Message Information 2-4 11 2.4 Procedures and Messages for the InConfiguration Instance of the Signaling 12 Application 2-5 13 2.4.1 Procedures 2-5 14 2.4.2 Commit Procedures 2-5 15 2.4.3 Message Formats . 2-6 16 2.4.3.1 ConfigurationRequest . 2-6 17

28、 2.4.3.2 ConfigurationResponse. 2-6 18 2.5 Signaling Network Protocol 2-7 19 2.5.1 Overview . 2-7 20 2.5.2 Primitives and Public Data . 2-7 21 2.5.2.1 Commands 2-7 22 2.5.2.2 Return Indications . 2-7 23 2.5.3 Protocol Data Unit . 2-7 24 2.5.4 Procedures and Messages for the InUse Instance of the Pro

29、tocol . 2-8 25 2.5.4.1 Procedures . 2-8 26 2.5.4.2 Type Definitions . 2-8 27 2.5.4.3 Messages . 2-9 28 2.5.4.4 SNP Header 2-9 29 2.5.4.5 Interface to Other Protocols 2-10 30 2.5.4.5.1 Commands . 2-10 31 2.5.4.5.2 Indications . 2-10 32 3GPP2 C.S0024-B v2.0 CONTENTS iii 2.6 Signaling Link Protocol 2-1

30、1 1 2.6.1 Overview 2-11 2 2.6.2 Primitives and Public Data . 2-11 3 2.6.2.1 Commands . 2-11 4 2.6.2.2 Return Indications 2-11 5 2.6.3 Protocol Data Unit 2-11 6 2.6.4 Procedures . 2-11 7 2.6.4.1 Reset 2-11 8 2.6.4.2 Delivery Layer Procedures . 2-12 9 2.6.4.2.1 General Procedures . 2-12 10 2.6.4.2.1.1

31、 Transmitter Requirements . 2-12 11 2.6.4.2.1.2 Receiver Requirements 2-12 12 2.6.4.2.2 Best Effort Delivery Procedures . 2-12 13 2.6.4.2.2.1 Transmitter Requirements . 2-12 14 2.6.4.2.2.2 Receiver Requirements 2-12 15 2.6.4.2.3 Reliable Delivery Procedures 2-12 16 2.6.4.2.3.1 Overview . 2-12 17 2.6

32、.4.2.3.2 Initialization 2-13 18 2.6.4.2.3.3 Data Transfer 2-13 19 2.6.4.2.3.3.1 Transmit Procedures 2-13 20 2.6.4.2.3.3.2 Receive Procedures 2-14 21 2.6.4.3 Fragmentation Layer Procedures . 2-15 22 2.6.4.3.1 Overview . 2-15 23 2.6.4.3.2 Initialization . 2-15 24 2.6.4.3.3 Data Transfer . 2-16 25 2.6.

33、4.3.4 Sender Requirements 2-16 26 2.6.4.3.5 Receiver Requirements 2-16 27 2.6.5 Header Formats . 2-17 28 2.6.5.1 SLP-F Header . 2-17 29 2.6.5.2 SLP-D Header . 2-18 30 2.6.6 Message Formats . 2-19 31 2.6.6.1 Reset 2-19 32 3GPP2 C.S0024-B v2.0 CONTENTS iv 2.6.6.2 ResetAck 2-19 1 2.6.6.3 Protocol Numer

34、ic Constants . 2-20 2 2.6.7 Interface to Other Protocols 2-20 3 2.6.7.1 Commands 2-20 4 2.6.7.2 Indications . 2-20 5 2.7 Configuration Attributes for the Default Signaling Application 2-20 6 2.8 Session State Information 2-20 7 3 Default Packet Application . 3-1 8 3.1 Introduction 3-1 9 3.1.1 Genera

35、l Overview . 3-1 10 3.1.2 Public Data 3-1 11 3.1.3 Data Encapsulation for the InUse Instance of the Application . 3-1 12 3.2 Protocol Initialization . 3-2 13 3.2.1 Protocol Initialization for the InConfiguration Application Instance 3-2 14 3.3 Procedures and Messages for the InConfiguration Instance

36、 of the Packet 15 Application 3-2 16 3.3.1 Procedures 3-2 17 3.3.2 Commit Procedures 3-3 18 3.3.3 Message Formats . 3-3 19 3.3.3.1 ConfigurationRequest . 3-3 20 3.3.3.2 ConfigurationResponse. 3-4 21 3.4 Radio Link Protocol . 3-5 22 3.4.1 Overview . 3-5 23 3.4.2 Primitives and Public Data . 3-5 24 3.

37、4.2.1 Commands 3-5 25 3.4.2.2 Return Indications . 3-5 26 3.4.3 Protocol Data Unit . 3-5 27 3.4.4 Procedures and Messages for the InUse Instance of the Protocol . 3-5 28 3.4.4.1 Procedures . 3-5 29 3.4.4.1.1 Initialization and Reset . 3-5 30 3.4.4.1.1.1 Initialization Procedure . 3-6 31 3.4.4.1.1.2

38、Reset Procedure 3-6 32 3GPP2 C.S0024-B v2.0 CONTENTS v 3.4.4.1.1.2.1 Reset Procedure for the Initiating Side 3-6 1 3.4.4.1.1.2.2 Reset Procedure for the Responding Side 3-6 2 3.4.4.1.2 Data Transfer . 3-7 3 3.4.4.1.2.1 RLP Transmit Procedures 3-7 4 3.4.4.1.2.2 RLP Receive Procedures . 3-8 5 3.4.4.2

39、RLP Packet Header . 3-9 6 3.4.4.3 Message Formats 3-9 7 3.4.4.3.1 Reset 3-9 8 3.4.4.3.2 ResetAck 3-9 9 3.4.4.3.3 Nak 3-10 10 3.4.4.4 Interface to Other Protocols 3-11 11 3.4.4.4.1 Commands . 3-11 12 3.4.4.4.2 Indications . 3-11 13 3.4.4.5 RLP Packet Priorities 3-11 14 3.4.5 Protocol Numeric Constant

40、s . 3-11 15 3.5 Location Update Protocol 3-12 16 3.5.1 Overview 3-12 17 3.5.2 Primitives and Public Data . 3-12 18 3.5.2.1 Commands . 3-12 19 3.5.2.2 Return Indications 3-12 20 3.5.3 Protocol Data Unit 3-12 21 3.5.4 Procedures and Messages for the InUse Instance of the Protocol 3-12 22 3.5.4.1 Proce

41、dures . 3-12 23 3.5.4.1.1 Access Network Requirements . 3-12 24 3.5.4.1.2 Access Terminal Requirements 3-12 25 3.5.4.2 Message Formats 3-13 26 3.5.4.2.1 LocationRequest . 3-13 27 3.5.4.2.2 LocationNotification 3-13 28 3.5.4.2.3 LocationAssignment 3-14 29 3.5.4.2.4 LocationComplete . 3-15 30 3.5.4.3

42、Interface to Other Protocols 3-15 31 3.5.4.3.1 Commands . 3-15 32 3GPP2 C.S0024-B v2.0 CONTENTS vi 3.5.4.3.2 Indications . 3-15 1 3.6 Flow Control Protocol 3-16 2 3.6.1 Overview . 3-16 3 3.6.2 Primitives and Public Data . 3-16 4 3.6.2.1 Commands 3-16 5 3.6.2.2 Return Indications . 3-17 6 3.6.3 Proto

43、col Data Unit . 3-17 7 3.6.4 Procedures and Messages for the InUse Instance of the Protocol . 3-17 8 3.6.4.1 Procedures . 3-17 9 3.6.4.1.1 Transmission and Processing of DataReady Message . 3-17 10 3.6.4.1.2 Close State . 3-17 11 3.6.4.1.2.1 Access Terminal Requirements 3-17 12 3.6.4.1.2.2 Access Ne

44、twork Requirements . 3-17 13 3.6.4.1.3 Open State . 3-17 14 3.6.4.1.3.1 Access Terminal Requirements 3-18 15 3.6.4.1.3.2 Access Network Requirements . 3-18 16 3.6.4.2 Message Formats . 3-18 17 3.6.4.2.1 XonRequest 3-18 18 3.6.4.2.2 XonResponse 3-18 19 3.6.4.2.3 XoffRequest 3-19 20 3.6.4.2.4 XoffResp

45、onse 3-19 21 3.6.4.2.5 DataReady . 3-19 22 3.6.4.2.6 DataReadyAck 3-20 23 3.6.5 Interface to Other Protocols 3-20 24 3.6.5.1 Commands 3-20 25 3.6.5.2 Indications . 3-20 26 3.6.6 Protocol Numeric Constants . 3-20 27 3.7 Configuration Attributes for the Default Packet Application 3-22 28 3.8 Session S

46、tate Information 3-22 29 3.8.1 Location Parameter 3-22 30 3.8.2 FlowControlState Parameter . 3-23 31 3GPP2 C.S0024-B v2.0 CONTENTS vii 4 Multi-Flow Packet Application 4-1 1 4.1 Introduction 4-1 2 4.1.1 General Overview . 4-1 3 4.1.2 Public Data 4-1 4 4.1.3 Data Encapsulation for the InUse Instance o

47、f the Application 4-1 5 4.2 Protocol Initialization . 4-2 6 4.2.1 Protocol Initialization for the InConfiguration Application Instance 4-2 7 4.3 Procedures and Messages for the InConfiguration Instance of the Packet 8 Application 4-2 9 4.3.1 Procedures . 4-2 10 4.3.2 Commit Procedures 4-3 11 4.3.3 M

48、essage Formats . 4-4 12 4.3.3.1 ConfigurationRequest . 4-4 13 4.3.3.2 ConfigurationResponse . 4-5 14 4.4 Radio Link Protocol 4-6 15 4.4.1 Overview 4-6 16 4.4.2 Primitives and Public Data . 4-6 17 4.4.2.1 Commands . 4-6 18 4.4.2.2 Return Indications 4-6 19 4.4.3 Protocol Data Unit 4-6 20 4.4.4 Proced

49、ures and Messages for the InUse Instance of the Protocol 4-6 21 4.4.4.1 Procedures . 4-6 22 4.4.4.1.1 Initialization and Reset . 4-8 23 4.4.4.1.1.1 Initialization Procedure 4-8 24 4.4.4.1.1.1.1 Initialization Procedure for the RLP Transmitter . 4-8 25 4.4.4.1.1.1.2 Initialization Procedure for the RLP Receiver. 4-8 26 4.4.4.1.1.2 Reset Procedure 4-8 27 4.4.4.1.1.2.1 Reset Procedure for the Initiating Side when it is an RLP 28 Transmitter 4-8 29 4.4.4.1.1.2.2 Reset Procedure for Initiating Side when it is an RLP 30 Receiver . 4-9 31 4.4.4.1.1.2.3 Reset Procedure for the Responding Side