TIA-870-A-2005 Test Data Service Option (TDSO) for cdma2000 Spread Spectrum Systems C Revision A《 cdma2000扩频系统的测试数据业务选择(TDSO)修订A》.pdf

1、 TIA STANDARD Test Data Service Option (TDSO) for cdma2000Spread Spectrum Systems Revision A TIA-870-A (Revision of TIA-870) MARCH 2005 TELECOMMUNICATIONS INDUSTRY ASSOCIATION The Telecommunications Industry Association represents the communications sector of NOTICE TIA Engineering Standards and Pub

2、lications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particul

3、ar need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntar

4、y use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation

5、whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to

6、 determine the applicability of regulatory limitations before its use. (From Standards Proposal No. 3-4877-100-RV1, formulated under the cognizance of the TIATR-45.5 Subcommittee on Spread Spectrum Digital Technology.) Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION 2004 Standards and Technolog

7、y Department 2500 Wilson Boulevard Arlington, VA 22201 U.S.A. PRICE: Please refer to current Catalog of TIA TELECOMMUNICATIONS INDUSTRY ASSOCIATION STANDARDS AND ENGINEERING PUBLICATIONS or call Global Engineering Documents, USA and Canada (1-800-854-7179) International (303-397-7956) or search onli

8、ne at http:/www.tiaonline.org/standards/search_n_order.cfm All rights reserved Printed in U.S.A. NOTICE OF COPYRIGHT This document is copyrighted by the TIA. Reproduction of these documents either in hard copy or soft copy (including posting on the web) is prohibited without copyright permission. Fo

9、r copyright permission to reproduce portions of this document, please contact TIA Standards Department or go to the TIA website (www.tiaonline.org) for details on how to request permission. Details are located at: http:/www.tiaonline.org/about/faqDetail.cfm?id=18 OR Telecommunications Industry Assoc

10、iation Standards (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this

11、Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIA

12、s attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licens

13、ing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been compl

14、ied with as respects the Document or its contents. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, E

15、XPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NON-INFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSL

16、Y DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMEN

17、T OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING

18、 DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELE

19、MENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. TIA-870-A CONTENTS i 1 General 1-1 1 1.1 Terms .1-1 2 1.2 Notation1-4 3 2 Test Data Service Option.2-1 4 2.1 Overview .2-1 5 2.2 General Description.2-2 6 2.2.1 For FCH, DCCH and SCH Te

20、stings.2-2 7 2.2.2 For F/R-PDCCH, F/R-ACKCH, F-GCH, R-REQCH and F/R-PDCH 8 Testings.2-2 9 2.3 Service Option Number2-2 10 2.4 Required Multiplex Option Support2-2 11 2.4.1 Multiplex Option Support for FCH/DCCH (for 20 ms FCH/DCCH Frames 12 Only) .2-2 13 2.4.2 Multiplex Option Support for SCH2-3 14 2

21、.4.3 Multiplex Option Support for F-PDCH and R-PDCH2-4 15 2.5 Interface to Multiplex Options for FCH, DCCH and SCH.2-4 16 2.5.1 Primary Traffic.2-4 17 2.5.2 Secondary Traffic.2-6 18 2.6 Interface to Multiplex Options for F-PDCH and R-PDCH.2-7 19 2.7 TDSO Frame Transmission and Reception for FCH, DCC

22、H and SCH 2-7 20 2.7.1 Transmitted Frames 2-8 21 2.7.2 Received Frames2-8 22 2.8 Interface to Layer 3 Signaling when Testing 5 ms FCH/DCCH Frames2-8 23 3 TDSO Procedures and Description for Fundamental Channel, Dedicated Control 24 Channel and Supplemental Channel.3-1 25 3.1 Negotiation and Activati

23、on of Service Option 3-1 26 3.1.1 Mobile Station Requirements .3-1 27 3.1.1.1 Supplemental Channel Allocation.3-3 28 3.1.1.1.1 SCRM_REQ_BLOB Format .3-5 29 3.1.1.1.2 SCRMM_REQ_BLOB Format 3-5 30 3.1.1.2 CDMA-CDMA Hard Handoff Scenario .3-6 31 3.1.1.3 Soft Handoff Scenario.3-7 32 3.1.2 Base Station R

24、equirements 3-7 33 TIA-870-A CONTENTS ii 3.2 Synchronization Frame . 3-7 1 3.2.1 Forward Traffic Channels 3-7 2 3.2.2 Forward Supplemental Channels. 3-8 3 3.2.3 Reverse Traffic Channels . 3-8 4 3.2.4 Reverse Supplemental Channels 3-8 5 3.3 Counters 3-9 6 3.4 Mobile Station Initialization and Control

25、 Operation 3-13 7 3.4.1 Service Option Initialization. 3-13 8 3.4.2 Mobile Station Control Operations . 3-15 9 3.4.2.1 Control Invocation . 3-15 10 3.4.2.2 Control Directive 3-15 11 3.4.2.3 Counter Retrieval. 3-16 12 3.5 Base Station Initialization and Control Operations. 3-17 13 3.5.1 Control Invoc

26、ation. 3-17 14 3.5.2 Control Directive . 3-17 15 3.5.3 Counter Retrieval 3-19 16 3.6 TDSO Frame Processing 3-19 17 3.6.1 Transmit Frame Processing . 3-19 18 3.6.2 Receive Frame Processing 3-20 19 3.6.3 Transmit Frame Processing for 5 ms FCH/DCCH Frames. 3-24 20 3.6.3.1 Mobile Station Requirement. 3-

27、24 21 3.6.3.2 Base Station Requirement 3-25 22 3.7 TDSO Frame Generation. 3-25 23 3.7.1 Selectable Byte Pattern 3-26 24 3.7.2 Pseudo-Random Number Generation . 3-26 25 3.7.2.1 Initialization 3-28 26 3.7.2.2 Number Production . 3-28 27 3.7.2.3 24-bit Random Number . 3-29 28 3.7.3 Circular Buffer Size

28、s . 3-29 29 3.7.4 Information Bit Generation 3-31 30 3.7.5 Frame Activity. 3-32 31 3.7.5.1 Deterministic Frame Activity 3-32 32 TIA-870-A CONTENTS iii 3.7.5.2 Random with a Specified Frame Activity and Burst Length3-33 1 3.7.6 Data Block Header and Formats 3-36 2 3.8 Message Formats 3-37 3 3.8.1 Ser

29、vice Option Control Message .3-37 4 3.8.1.1 Control 3-38 5 3.8.1.2 Counter Retrieval .3-42 6 3.8.1.3 Counter Responses on the Fundicated Channels 3-43 7 3.8.1.3.1 FER Counters Response.3-43 8 3.8.1.4 Receive Expected Counters Response .3-46 9 3.8.1.5 Transmitted Counters Response.3-49 10 3.8.1.6 5 m

30、s Frame Transmitted Counters Response3-50 11 3.8.1.7 5 ms Frame Received Counters Response .3-51 12 3.8.2 Counter responses on the Supplemental Channels.3-52 13 3.8.2.1 FER Counters Response.3-52 14 3.8.2.2 PER Counters Response.3-54 15 3.8.2.3 Transmitted Counters Response.3-58 16 4 DV TDSO Procedu

31、res and Description for Packet Data Channel.4-1 17 4.1 Operation Overview .4-1 18 4.1.1 Data Generation for F/R-PDCH4-1 19 4.1.2 Counter Maintenance 4-1 20 4.2 Negotiation and Activation of Service Option 4-2 21 4.2.1 Mobile Station Requirements .4-2 22 4.2.2 Base Station Requirements 4-3 23 4.3 Req

32、uirements on F-PDCCH/PDCH Testing 4-3 24 4.4 Requirements on R-ACKCH Teseting4-4 25 4.5 Requirements on R-CQICH Testing 4-4 26 4.6 Requirements on R-PDCH/PDCCH Testing 4-4 27 4.7 Requirements on F-ACKCH Testing .4-4 28 4.8 Requirements on F-GCH Testing4-5 29 4.9 Requirements on F-RCCH Testing4-5 30

33、4.10 Requirements on R-REQCH Testing.4-5 31 4.11 TDSO Data Generation and Processing 4-5 32 TIA-870-A CONTENTS iv 4.11.1 Initialization Procedures 4-5 1 4.11.2 PDCH TDSO frame format . 4-5 2 4.11.3 Transmit Frame Processing . 4-6 3 4.11.4 Receive Frame Processing 4-7 4 4.11.5 Sending the Service Opt

34、ion Control Message 4-7 5 4.12 Counters 4-7 6 4.12.1 Terminology on Encoder Packet Size 4-7 7 4.12.2 Updating Counter Procedures at the Mobile Station . 4-13 8 4.12.3 Updating Counter Procedures at the Base Station 4-14 9 4.12.4 Configuration or Parameters Change . 4-14 10 4.12.5 Processing the Serv

35、ice Option Control Message at the Mobile Station . 4-14 11 4.12.6 Processing the Service Option Control Message at the Base Station 4-16 12 4.12.7 Service Option Control Message. 4-18 13 4.12.7.1 Control Directive 4-18 14 4.12.7.2 Counter Retrieval. 4-22 15 4.12.7.3 Counter Response . 4-25 16 ANNEX

36、A: TDSO Call Flow Examples (for a system operating in MC-41 mode) .A-1 17 ANNEX B: TDSO Operation Examples.B-1 18 ANNEX C: Using the TDSO.C-1 19 ANNEX D: Calculating p and q Based on D and B D-1 20 TIA-870-A FIGURES v Figure 1. Synchronized Operation of Pseudo-Random Number Generated 1 Buffers3-27 2

37、 Figure 2. Reshuffling of )(ynk to Generate )(yLEnk 3-31 3 Figure 3. Two-State Markov Chain Representing ON/OFF Transitions for 4 TDSO3-33 5 Figure 4. Flowchart Illustrating TDSO State Transitions for a D Frame 6 activity and B Average “On“ Period in Units of Frames3-35 7 Figure 5. Mobile Station Or

38、igination Example with Transmission on 8 DCCH/FCH/SCH (Part 1 of 2) A-1 9 Figure 6. Mobile Station Origination Example with Transmission on 10 DCCH/FCH/SCH (Part 2 of 2) A-2 11 Figure 7. Base Station Commanded Test Parameters Change . A-3 12 Figure 8. Soft Handoff: Resources Not Available. A-3 13 Fi

39、gure 9. Soft Handoff: Reduced Rate Available. . A-4 14 TIA-870-A NOTES vi Table 1. Summary of Test Data Service Option Notation 1-4 1 Table 2. Multiplex Option Support for FCH or DCCH 2-3 2 Table 3. Multiplex Options Applicable to an SCH 2-3 3 Table 4. Primary Traffic Types Supplied by the TDSO to t

40、he Multiplex 4 Sublayer. 2-5 5 Table 5. Primary Traffic Frame Types Supplied by the Multiplex Sublayer to 6 TDSO . 2-5 7 Table 6. Secondary Traffic Frames Supplied by TDSO to the Multiplex 8 Sublayer. 2-6 9 Table 7. Secondary Traffic Frames Supplied by Multiplex Sublayer to the 10 TDSO . 2-7 11 Tabl

41、e 8. Valid Service Configuration Attributes for Test Data Service Option . 3-2 12 Table 9. SCRM_REQ_BLOB Format 3-5 13 Table 10. SCRMM_REQ_BLOB Format . 3-5 14 Table 11. Encoding of the PREFERRED_RATE Field 3-6 15 Table 12. Encoding of the DURATION Field 3-6 16 Table 13. Transmit Frame Ccounters on

42、the Fundicated Channel . 3-9 17 Table 14. Transmitted Frame Counters on the Supplemental Channel 3-9 18 Table 15. Receive Frame Counters Maintained for the FCH/DCCH 3-10 19 Table 16. Receive Frame Counters on the Supplemental Channel 3-10 20 Table 17. Receive PDU Counters Maintained for the Suppleme

43、ntal Channels 3-11 21 Table 18. Frame Counter-Value Storage . 3-12 22 Table 19. Frame Counter-Value Storage for Supplemental Channels . 3-12 23 Table 20. Counters for Fundicated Transmitted Frames 3-20 24 Table 21. Counters for Supplemental Transmitted Frames 3-20 25 Table 22. Counter Updates for Re

44、ceived Fundicated Frames when MuxPDU 26 Type 1 is Used 3-21 27 Table 23. Counter Updates for Received Fundicated Frames when MuxPDU 28 Type 2 is Used 3-22 29 Table 24. Counter Updates for PDUs Received on Supplemental Channels 3-23 30 Table 25. Counter Updates for Received Frames on Supplemental Cha

45、nnels . 3-24 31 Table 26. Circular Buffer Sizes Needed to Generate Fundicated Channel Data 32 Frames . 3-30 33 TIA-870-A TABLES vii Table 27. Circular Buffer Sizes Needed to Generate Reverse Supplemental 1 Channel Data Frames3-30 2 Table 28. Circular Buffer Sizes Needed to Generate Forward Supplemen

46、tal 3 Channel Data Frames3-30 4 Table 29. Procedure for Generating the Default Circular Buffers for RC2 5 Channels 3-32 6 Table 30. Data Block Format 3-36 7 Table 31. CHANNEL_ID Type Codes 3-36 8 Table 32. CTL_REC_TYPE Codes.3-37 9 Table 33. Service Option Control Message Type-specific Fields3-38 10

47、 Table 34. CONTROL_CODE Codes 3-40 11 Table 35. DATA_SOURCE Codes.3-41 12 Table 36. FRAME_ACTIVITY Codes .3-41 13 Table 37. CHANNEL_DIRECTION Codes3-41 14 Table 38. FRAME_SOURCE Codes 3-41 15 Table 39 TEST OPTIONS Codes 3-42 16 Table 40. Type-Specific Fields in a Service Option Control Message Used

48、for 17 Counter Retrieval on the FCH/DCCH.3-42 18 Table 41. VECT_COUNTER_ID Codes for FCH/DCCH3-42 19 Table 42. Type-Specific Fields in a Service Option Control Message Used for 20 Counter Retrieval from the Mobile Station for SCHs .3-43 21 Table 43. VECT_COUNTER_ID Codes for SCHs .3-43 22 Table 44.

49、Type-Specific Fields in a Service Option Control Message 23 Corresponding to FER Counters Response on FCH/DCCH .3-44 24 Table 45. Type-Specific Fields in a Service Option Control Message 25 Corresponding to Receive Expected Counters Response on FCH/DCCH3-46 26 Table 46. Type-Specific Fields in a Service Option Control Message 27 Corresponding to Transmitted Counters Response on FCH/DCCH .3-49 28 Table 47. Type-Specific Fields in a Service Option Control Message 29 corresponding to 5 ms Frame Transmitted Counters Response on 30 FCH/DCCH.3-50 31 Table 48. Type-Specific Fields in a Ser