TIA-873 006-1[E]-2006 All-IP Core Network Multimedia Domain Cx Interface Based on the Diameter Protocol Protocol Details Addendum to TIA-873 006《CDMA2000扩频系统的IP网－基于直径协议上的Cx接口 协议细节》.pdf

1、 TIA STANDARD All-IP Core Network Multimedia Domain Cx Interface Based on the Diameter Protocol; Protocol Details TIA-873.006-1E (Addendum to TIA-873.006) June 2006 TELECOMMUNICATIONS INDUSTRY ASSOCIATION Representing the telecommunications industry in association with the Electronic Industries Alli

2、ance Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstan

3、dings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect p

4、reclude any member or non-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publ

5、ications are adopted by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not pur

6、port to address all safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Project

7、 No. 3-4935.006-AD1E, formulated under the cognizance of the TIA, TR-45.2 Subcommittee on Wireless Intersystem Technology). Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION Standards and Technology Department 2500 Wilson Boulevard Arlington, VA 22201 U.S.A. PRICE: Please refer to current Catalog

8、 of TIA TELECOMMUNICATIONS INDUSTRY ASSOCIATION STANDARDS AND ENGINEERING PUBLICATIONS or call Global Engineering Documents, USA and Canada (1-800-854-7179) International (303-397-7956) or search online at http:/www.tiaonline.org/standards/catalog/ All rights reserved Printed in U.S.A. Copyright Tel

9、ecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-NOTICE OF COPYRIGHT This document is copyrighted by the TIA. Reproduction of these documents either in hard copy or soft copy (including posti

10、ng on the web) is prohibited without copyright permission. For copyright permission to reproduce portions of this document, please contact TIA Standards Department or go to the TIA website (www.tiaonline.org) for details on how to request permission. Details are located at: http:/www.tiaonline.org/s

11、tandards/catalog/info.cfm#copyright OR Telecommunications Industry Association Standards (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards deve

12、lopment or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents

13、 and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any

14、 claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that pro

15、cedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of

16、 standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search or investigate the re

17、cords of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to

18、claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or ot

19、herwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PART

20、ICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE

21、STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproductio

22、n or networking permitted without license from IHS-,-,-TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING

23、 DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELE

24、MENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-873-006-1E

25、 i All-IP Core Network Multimedia Domain 1 Cx Interface Based on the Diameter Protocol; 2 Protocol Details 3 Contents 4 5 1 Scope 1 6 2 References 1 7 3 Definitions, symbols and abbreviations 1 8 3.1 Definitions. 1 9 3.2 Abbreviations 2 10 4 General . 2 11 5 Use of the Diameter base protocol 2 12 5.

26、1 Securing Diameter Messages 2 13 5.2 Accounting functionality . 2 14 5.3 Use of sessions 3 15 5.4 Transport protocol 3 16 5.5 Routing considerations. 3 17 5.6 Advertising Application Support . 3 18 6 Diameter application for Cx interface 4 19 6.1 Command-Code values . 4 20 6.1.1 User-Authorization-

27、Request (UAR) Command . 5 21 6.1.2 User-Authorization-Answer (UAA) Command 5 22 6.1.3 Server-Assignment-Request (SAR) Command 5 23 6.1.4 Server-Assignment-Answer (SAA) Command. 6 24 6.1.5 Location-Info-Request (LIR) Command 6 25 6.1.6 Location-Info-Answer (LIA) Command. 7 26 6.1.7 Multimedia-Auth-Re

28、quest (MAR) Command 7 27 6.1.8 Multimedia-Auth-Answer (MAA) Command 8 28 6.1.9 Registration-Termination-Request (RTR) Command. 8 29 6.1.10 Registration-Termination-Answer (RTA) Command. 9 30 6.1.11 Push-Profile-Request (PPR) Command 9 31 6.1.12 Push-Profile-Answer (PPA) Command 9 32 6.2 Experimental

29、-Result-Code AVP values . 10 33 6.2.1 Success . 10 34 6.2.1.1 DIAMETER_FIRST_REGISTRATION (2001) 10 35 6.2.1.2 DIAMETER_SUBSEQUENT_REGISTRATION (2002). 10 36 6.2.1.3 DIAMETER_UNREGISTERED_SERVICE (2003). 10 37 6.2.1.4 DIAMETER_SUCCESS_SERVER_NAME_NOT_STORED (2004) 10 38 6.2.1.5 DIAMETER_SERVER_SELEC

30、TION (2005) 10 39 Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-873-006-1E ii 6.2.2 Permanent Failures . 11 1 6.2.2.1 DIAMETER_ERROR_USER_UNKNOWN (5001). 11 2 6.2.2.2 DIAM

31、ETER_ERROR_IDENTITIES_DONT_MATCH (5002) . 11 3 6.2.2.3 DIAMETER_ERROR_IDENTITY_NOT_REGISTERED (5003) . 11 4 6.2.2.4 DIAMETER_ERROR_ROAMING_NOT_ALLOWED (5004) . 11 5 6.2.2.5 DIAMETER_ERROR_IDENTITY_ALREADY_REGISTERED (5005) 11 6 6.2.2.6 DIAMETER_ERROR_AUTH_SCHEME_NOT_SUPPORTED (5006) 11 7 6.2.2.7 DIA

32、METER_ERROR_IN_ASSIGNMENT_TYPE (5007) 11 8 6.2.2.8 DIAMETER_ERROR_TOO_MUCH_DATA (5008). 11 9 6.2.2.9 DIAMETER_ERROR_NOT_SUPPORTED_USER_DATA (5009) 11 10 6.2.2.10 DIAMETER_MISSING_USER_ID (5010) 11 11 6.3 AVPs 12 12 6.3.1 Visited-Network-Identifier AVP 13 13 6.3.2 Public-Identity AVP .13 14 6.3.3 Ser

33、ver-Name AVP 13 15 6.3.4 Server-Capabilities AVP 13 16 6.3.5 Mandatory-Capability AVP 13 17 6.3.6 Optional-Capability AVP . 13 18 6.3.7 User-Data AVP. 13 19 6.3.8 SIP-Number-Auth-Items AVP 14 20 6.3.9 SIP-Authentication-Scheme AVP. 14 21 6.3.10 SIP-Authenticate AVP 14 22 6.3.11 SIP-Authorization AVP

34、 14 23 6.3.12 SIP-Authentication-Context AVP. 14 24 6.3.13 SIP-Auth-Data-Item AVP. 14 25 6.3.14 SIP-Item-Number AVP 15 26 6.3.15 Server-Assignment-Type AVP. 15 27 6.3.16 Deregistration-Reason AVP . 16 28 6.3.17 Reason-Code AVP. 16 29 6.3.18 Reason-Info AVP 16 30 6.3.19 Charging-Information AVP 16 31

35、 6.3.20 Primary-Event-Charging-Function-Name AVP . 16 32 6.3.21 Secondary-Event-Charging-Function-Name AVP . 16 33 6.3.22 Primary-Charging-Collection-Function-Name AVP 17 34 6.3.23 Secondary-Charging-Collection-Function-Name AVP 17 35 6.3.24 User-Authorization-Type AVP. 17 36 6.3.25 Void 17 37 Copyr

36、ight Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-873-006-1E iii 6.3.26 User-Data-Already-Available AVP 17 1 6.3.27 Confidentiality-Key AVP . 18 2 6.3.28 Integrity-Key AVP .18 3 6.

37、4 Use of namespaces . 18 4 6.4.1 AVP codes 18 5 6.4.2 Experimental-Result-Code AVP values . 18 6 6.4.3 Command Code values. 18 7 6.4.4 Application-ID value 18 8 9 10 Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking pe

38、rmitted without license from IHS-,-,-TIA-873-006-1E iv Foreword 1 This document contains portions of material copied from 3GPP document number 29.229. The copyright 2 on the 3GPP document is owned by the Organizational Partners of 3GPP (ARIB - Association of Radio 3 Industries and Businesses, Japan;

39、 CCSA China Communications Standards Association, China; ETSI - 4 European Telecommunications Standards Institute; ATSI; TTA - Telecommunications Technology 5 Association, Korea; and TTC Telecommunication Technology Committee, Japan), which have granted 6 license for reproduction and for use by 3GPP

40、2 and its Organizational Partners. 7 8 Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-873-006-1E 1 1 Scope 1 The present document defines a transport protocol for use in th

41、e IP multimedia (IM) Core Network (CN) 2 subsystem based on Diameter. 3 The present document is applicable to: The Cx interface between the I-CSCF/S-CSCF and the HSS. 4 Whenever it is possible this document specifies the requirements for this protocol by reference to 5 specifications produced by the

42、 IETF within the scope of Diameter. Where this is not possible, extensions to 6 Diameter are defined within this document. 7 2 References 8 The following documents contain provisions, which through reference in this text constitute provisions of 9 the present document. 10 References are either speci

43、fic (identified by date of publication, edition number, version number, 11 etc.) or non-specific. 12 For a specific reference, subsequent revisions do not apply. 13 For a non-specific reference, the latest version applies. 14 1 3GPP2 X.S0013-005-0 v2.0, “IP Multimedia (IM) Subsystem Cx interface; si

44、gnalling flows and 15 message contents” 16 TIA-873-005-1E, “IP Multimedia (IM) Subsystem Cx interface; signalling flows and message 17 contents” 18 2 3GPP2 S.RS0086-A, “IMS Security Framework” 19 3 IETF RFC 3261, “SIP: Session Initiation Protocol“ 20 4 IETF RFC 2396, “Uniform Resource Identifiers (U

45、RI): generic syntax” 21 5 IETF RFC 2960, “Stream Control Transmission Protocol” 22 6 IETF RFC 3588, “Diameter Base Protocol” 23 7 IETF RFC 2234, “Augmented BNF for syntax specifications” 24 8 IETF RFC 2806, “URLs for Telephone Calls” 25 9 void 26 10 IETF RFC 3309, “SCTP Checksum Change” 27 11 3GPP2

46、X.S0013-011-0 v2.0, “Sh Interface based on the Diameter protocol; protocol details” 28 TIA-873-011-1E, “Sh Interface based on the Diameter protocol; protocol details” 29 12 IETF RFC 3589, “Diameter Command Codes for Third Generation Partnership Project (3GPP) 30 Release 5” 31 32 3 Definitions, symbo

47、ls and abbreviations 33 3.1 Definitions 34 Refer to 6 for the definitions of some terms used in this document. 35 Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-873-006-1E

48、2 For the purposes of the present document, the following terms and definitions apply. 1 Attribute-Value Pair: see 6, it corresponds to an Information Element in a Diameter message. 2 Diameter Multimedia client: The client is one of the communicating Diameter peers that usually initiate 3 transactions 4 Diameter Multimedia server: A Diameter Multimedia server that also supported the NASREQ and 5 MobileIP applications would be referred to as a Diameter server. 6 Registration: SIP-registration. 7 Server: SIP-server. 8 User data: user profile data. 9 3.2 Abbreviatio