TIA-873 011-1[E]-2006 All-IP Core Network Multimedia Domain Sh Interface Based on Diameter Protocols Protocol Details Stage 3 Addendum to TIA-873 011《CDMA2000扩频系统的IP网－Sh接口基于直径协议－协议.pdf

1、 TIA STANDARD All-IP Core Network Multimedia Domain Sh Interface Based on Diameter Protocols Protocol Details Stage 3 TIA-873.011-1E (Addendum to TIA-873.011) July 2006 TELECOMMUNICATIONS INDUSTRY ASSOCIATION Representing the telecommunications industry in association with the Electronic Industries

2、Alliance Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunder

3、standings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respe

4、ct preclude any member or non-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and

5、Publications are adopted by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not

6、 purport to address all safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Pro

7、ject No. 3-4935.011-AD1E, formulated under the cognizance of the TIA, TR-45.2 Subcommittee on Wireless Intersystem Technology). Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION Standards and Technology Department 2500 Wilson Boulevard Arlington, VA 22201 U.S.A. PRICE: Please refer to current Cat

8、alog of TIA TELECOMMUNICATIONS INDUSTRY ASSOCIATION STANDARDS AND ENGINEERING PUBLICATIONS or call Global Engineering Documents, USA and Canada (1-800-854-7179) International (303-397-7956) or search online at http:/www.tiaonline.org/standards/catalog/ All rights reserved Printed in U.S.A. Copyright

9、 Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-NOTICE OF COPYRIGHT This document is copyrighted by the TIA. Reproduction of these documents either in hard copy or soft copy (including p

10、osting on the web) is prohibited without copyright permission. For copyright permission to reproduce portions of this document, please contact TIA Standards Department or go to the TIA website (www.tiaonline.org) for details on how to request permission. Details are located at: http:/www.tiaonline.o

11、rg/standards/catalog/info.cfm#copyright OR Telecommunications Industry Association Standards (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards

12、development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of pat

13、ents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of

14、 any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that

15、 procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publicatio

16、n of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search or investigate th

17、e records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as

18、 to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test o

19、r otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A

20、PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICA

21、BLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reprodu

22、ction or networking permitted without license from IHS-,-,-TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLU

23、DING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL

24、 ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-873-01

25、1-1E i All-IP Core Network Multimedia Domain 1 Sh Interface based on Diameter Protocols 2 Protocol Details Stage 3 3 4 Contents 5 6 1 Scope . 1 7 2 References 1 8 3 Definitions, symbols and abbreviations 1 9 3.1 Definitions . 1 10 3.2 Abbreviations 2 11 4 General. 2 12 5 Use of the Diameter base pro

26、tocol. 2 13 6 Diameter application for Sh interface . 2 14 6.1 Command-Code values 2 15 6.1.1 User-Data-Request (UDR) Command 3 16 6.1.2 User-Data-Answer (UDA) Command 4 17 6.1.3 Profile-Update-Request (PUR) Command . 4 18 6.1.4 Profile-Update-Answer (PUA) Command 4 19 6.1.5 Subscribe-Notifications-

27、Request (SNR) Command . 5 20 6.1.6 Subscribe-Notifications-Answer (SNA) Command 5 21 6.1.7 Push-Notification-Request (PNR) Command. 6 22 6.1.8 Push-Notifications-Answer (PNA) Command . 6 23 6.2 Experimental-Result-Code AVP values 6 24 6.2.1 Success . 6 25 6.2.2 Permanent Failures . 7 26 6.2.3 Transi

28、ent Failures . 7 27 6.2.3.1 DIAMETER_USER_DATA_NOT_AVAILABLE (4100) 7 28 6.2.3.2 DIAMETER_PRIOR_UPDATE_IN_PROGRESS (4101) 7 29 6.3 AVPs . 7 30 6.3.1 User-Identity AVP 8 31 6.3.2 MSISDN AVP 8 32 6.3.3 User-Data AVP. 8 33 6.3.4 Data-Reference AVP 8 34 6.3.5 Service-Indication AVP9 35 6.3.6 Subs-Req-Ty

29、pe AVP 9 36 6.3.7 Requested-Domain AVP 9 37 Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-873-011-1E ii 6.3.8 Current-Location AVP9 1 6.3.9 Server-Name AVP 9 2 6.3.10 Publ

30、ic-Identity AVP . 9 3 6.4 Use of namespaces 10 4 6.4.1 AVP codes 10 5 6.4.2 Experimental-Result-Code AVP values . 10 6 6.4.3 Command Code values. 10 7 6.4.4 Application-ID value 10 8 9 Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproducti

31、on or networking permitted without license from IHS-,-,-TIA-873-011-1E iii Foreword 1 “This document contains portions of material copied from 3GPP document number(s) TS 29.329-5790. The 2 copyright on the 3GPP document is owned by the Organizational Partners of 3GPP (ARIB - Association of 3 Radio I

32、ndustries and Businesses, Japan; CCSA (China Communications Standards Association), China; 4 ETSI European Telecommunications Standards Institute; ATIS, USA; TTA - Telecommunications 5 Technology Association, Korea; and TTC Telecommunication Technology Committee, Japan), which 6 have granted license

33、 for reproduction and for use by 3GPP2 and its Organizational Partners.” 7 8 Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-873-011-1E iv 1 Copyright Telecommunications Ind

34、ustry Association Provided by IHS under license with EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-873-011-1E 1 1 Scope 1 The present document defines a transport protocol for use in the IP multimedia (IM) Core Network (CN) 2 subsystem based on Diameter. 3

35、 The present document is applicable to: 4 - The Sh interface between an SIP AS and the AAA. 5 - The Sh interface between an SCS and the AAA. 6 Whenever it is possible this document specifies the requirements for this protocol by reference to 7 specifications produced by the IETF within the scope of

36、Diameter. Where this is not possible, extensions to 8 Diameter are defined within this document. 9 2 References 10 The following documents contain provisions, which through reference in this text constitute provisions of 11 the present document. 12 References are either specific (identified by date

37、of publication, edition number, version number, 13 etc.) or non-specific. 14 For a specific reference, subsequent revisions do not apply. 15 For a non-specific reference, the latest version applies. In the case of a reference to a 3GPP2 16 document, a non-specific reference implicitly refers to the

38、latest version of that document in the 17 same Release as the present document. 18 1 TIA-873-010-1E: “IP Multimedia (IM) Subsystem Sh interface; signalling flows and message 19 contents”. 20 3GPP2 X.S0013-010-0 v2.0: “IP Multimedia (IM) Subsystem Sh interface; signalling flows and 21 message content

39、s”. 22 2 void 23 3 IETF RFC 2960 “Stream Control Transmission Protocol” 24 4 IETF RFC 3588, “Diameter Base Protocol”, September 2003. 25 5 IETF RFC 2234 “Augmented BNF for syntax specifications” 26 6 TIA-873-006-1E: “Cx Interface based on Diameter protocol; protocol details”. 27 3GPP2 X.S0013-006-0

40、v2.0: “Cx Interface based on Diameter protocol; protocol details”. 28 7 IETF RFC 3589, “Diameter Command Codes for 3GPP Release 5”, September 2003. 29 8 3GPP TS 23.003 V5.6.0 (2003-06): 3GPP Technical Specification Group Core Network; 30 Numbering, addressing and identification (Release 5) 31 3 Defi

41、nitions, symbols and abbreviations 32 3.1 Definitions 33 Refer to 4 for the definitions of some terms used in this document. 34 For the purposes of the present document, the following terms and definitions apply. 35 Copyright Telecommunications Industry Association Provided by IHS under license with

42、 EIANot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TIA-873-011-1E 2 Attribute-Value Pair: see 4, it corresponds to an Information Element in a Diameter message. 1 Server: SIP-server. 2 User data: user profile data. 3 3.2 Abbreviations 4 For the purposes of the pre

43、sent document, the following abbreviations apply: 5 AAA Authentication, Authorization and Accounting 6 AS Application Server 7 ABNF Augmented Backus-Naur Form 8 AVP Attribute-Value Pair 9 CN Core Network 10 HSS Home Subscriber Server 11 IANA Internet Assigned Numbers Authority 12 IETF Internet Engin

44、eering Task Force 13 IMS IP Multimedia Subsystem 14 RFC Request For Comment 15 SCS Service Capability Server 16 SCTP Stream Control Transport Protocol 17 UCS Universal Character Set 18 URL Uniform Resource Locator 19 UTF UCS Transformation Formats 20 4 General 21 The Diameter Base Protocol as specif

45、ied in 4 shall apply except as modified by the defined support of the 22 methods and the defined support of the commands and AVPs, result and event codes specified in clause 65 23 of this specification. Unless otherwise specified, the procedures (including error handling and unrecognised 24 informat

46、ion handling) are unmodified. 25 Note: The MSISDN represented in this document is similar to the MDN in 3GPP2. 26 5 Use of the Diameter base protocol 27 The same clarifications of section 5 of 6 shall apply to the Sh interface. An exception is that the 28 application identifier for this application

47、is defined in chapter 6. 29 6 Diameter application for Sh interface 30 This clause specifies a Diameter application that allows a Diameter server and a Diameter client: 31 - to download and update transparent and non-transparent user data 32 - to request and send notifications on changes on user dat

48、a 33 The Sh interface protocol is defined as an IETF vendor specific Diameter application, where the vendor is 34 3GPP. The vendor identifier assigned by IANA to 3GPP ( http:/www.iana.org/assignments/enterprise-35 numbers) is 10415. 36 The Diameter application identifier assigned to the Sh interface application is 16777215216777217 . 37 6.1 Command-Code values 38 This section defines Command-Code values for this Diameter application. 39 Copyright Telecommunications Industry Association Provided by IHS under license with EIANot for ResaleNo reproduction or net