TIA-902 BAEB-A-2008 Wideband Air Interface Packet Data Specification Public Safety Wideband Data Standards Project Digital Radio Technical Standards《宽带空中接口分组数据规范 公共安全宽带数据标准项目 数字无线技.pdf

1、 TIA-902.BAEB-A (Revision of TIA-902.BAEB) January 2008Wideband Air Interface Packet Data Specification Public Safety Wideband Data Standards Project Digital Radio Technical Standards ANSI/TIA-902.BAEB-A-2008 APPROVED: JANUARY 8, 2008REAFFIRMED: OCTOBER 3, 2013NOTICE TIA Engineering Standards and Pu

2、blications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particu

3、lar need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their volunta

4、ry use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation

5、 whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and t

6、o determine the applicability of regulatory limitations before its use. (From Project No. SP-3-0094-RV1-RF1, formulated under the cognizance of the TIA TR-8 Mobile and Personal Private Radio Standards, TR-8.5 Subcommittee on Signaling and Data Transmission). Published by TELECOMMUNICATIONS INDUSTRY

7、ASSOCIATION Technology (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of

8、 this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called

9、to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any

10、licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been

11、 complied with as respects the Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recom

12、mendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to

13、 any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shal

14、l not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of

15、 compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT

16、 OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF TH

17、E CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL IN

18、DIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH

19、DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. WAI Packet Data Specification TIA-902.BAEB-A i Foreword (This foreword is not part of this standard.) This document has be

20、en published by the Telecommunications Industry Association (TIA) in accordance with the terms and conditions provided for in a Memorandum of Understanding (MoU) executed by and between the TIA, the Associated Public-Safety Communications Officials (APCO), the National Association of State Telecommu

21、nications Directors (NASTD), and the various agencies of the Federal government (FED). This TIA Standard is being promulgated and will be maintained by the TR-8.5 Signaling and Data Transmission committee, and working groups under the sponsorship of the Telecommunications Industry Association. This

22、document has been published as a TIA Standard because it contains useful technical information on emerging digital techniques for Land Mobile Radio Service. In particular, it describes the wideband air interface packet data bearer service technology. Generally, the wideband air interface has been de

23、veloped by TIA TR-8.5 to be consistent with the Statement of Requirements adopted by the National Coordination Committees Interoperability Subcommittee, WG6 Wideband Data. This document references that the primary user needs document will be “APCO Project 25/34 Statement of Requirements (P34SOR)”. T

24、his Packet Data Specification provides a standard for the definition and control for transmission of IP Datagrams over 50, 100, and 150 kHz bandwidth Wideband Air Interface lower layer protocols. The TIA makes no claims as to the applicability of the information contained in this document for any pu

25、rpose although it is believed that the information will prove to be invaluable to designers of wideband data compliant equipment. Some aspects of the specifications contained in this document may not have been fully operationally tested; however, a great deal of time and good faith effort has been i

26、nvested in the preparation of this document to ensure the accuracy of the information it contains. While all reasonable efforts have been made to ensure the accuracy of this document, it should be understood that significant work remains in fully developing the standard series and this document will

27、 be updated as necessary. TIA-902.BAEB-A WAI Packet Data Specification ii Patent Identification The readers attention is called to the possibility that compliance with this document may require the use of one or more inventions covered by patent rights. By publication of this document, no position i

28、s taken with respect to the validity of those claims or any patent rights in connection therewith. The patent holders so far identified have, we believe, filed statements of willingness to grant licenses under those rights on reasonable and nondiscriminatory terms and conditions to applicants desiri

29、ng to obtain such licenses. The following patent holders and patents have been identified in accordance with the TIA intellectual property rights policy: None currently identified TIA shall not be responsible for identifying patents for which licenses may be required by this document or for conducti

30、ng inquiries into the legal validity or scope of those patents that are brought to its attention. WAI Packet Data Specification TIA-902.BAEB-A iii TABLE OF CONTENTS 1. SCOPE1 2. TERMS.2 3. GENERAL DESCRIPTION.3 3.1 OVERVIEW 3 3.2 SPECIFIC TERMINOLOGY.3 3.3 DESCRIPTION OF SERVICE CONFIGURATIONS 3 3.3

31、.1 Mobile to Fixed Host Service (FNE Data) 3 3.3.2 Mobile to Mobile Data Service (Repeated Data) 3 3.3.3 Mobile-to-Mobile Data Service (Direct Data) 4 3.4 IP DATAGRAM CONVEYANCE.4 3.4.1 Simple WAI Encapsulation Protocol (SWEP) .4 3.4.2 Sub-Network Dependent Convergence Protocol (SNDCP).4 3.5 IP VERS

32、ION 4 SERVICES 4 3.5.1 Bearer Services4 3.5.2 Supplementary Services.5 3.6 IP VERSION 6 SERVICES 5 3.6.1 Bearer Services6 3.6.2 Supplemental Services.6 3.7 SNDCP/SWEP INTERFACES TO OTHER LAYERS.7 3.7.1 Interface to Service Users .7 3.7.2 SNDCP / SWEP Interface to LLC Layer .7 3.7.3 SNDCP Interface t

33、o MM Layer.8 4. FNE DATA CONFIGURATION OPERATION 9 4.1 GENERAL SNDCP DESCRIPTION 9 4.1.1 PDP Context Maintenance9 4.1.2 Management of Data Transfers.9 4.1.3 Compression of IP Header and User Data .9 4.2 SNDCP STATES AND TRANSITIONS .10 4.2.1 SNDCP State Descriptions11 4.2.2 SNDCP Timers 12 4.3 SERVI

34、CE ESTABLISHMENT AND MANAGEMENT PROCEDURES 13 4.3.1 IP Addressing Alternatives13 4.3.2 PDP Context Activation 13 4.3.3 PDP Context Deactivation 16 4.4 DATA TRANSFER AND CONTROL PROCEDURES .17 4.4.1 LLC UP Link Maintenance17 4.4.2 Unicast IP Datagram Conveyance17 4.4.3 Broadcast IP Datagram Conveyanc

35、e20 4.4.4 Multicast IP Datagram Conveyance .20 4.5 SUPPLEMENTAL SERVICE PROCEDURES .21 4.5.1 IP User Authentication21 4.5.2 Mobile IPv4 .21 4.5.3 IP Header Compression 22 5. DIRECT DATA CONFIGURATION OPERATION.23 5.1 SWEP OVERVIEW.23 5.2 SERVICE ESTABLISHMENT AND MANAGEMENT PROCEDURES 24 5.2.1 Servi

36、ce Activation24 5.2.2 Service Deactivation24 5.2.3 Service Management .24 5.3 DATA TRANSFER AND CONTROL PROCEDURES .24 TIA-902.BAEB-A WAI Packet Data Specification iv 5.3.1 IPv4 to WAI Address Resolution. 24 5.3.2 IPv6 to WAI Address Resolution. 25 5.3.3 MRC to MDP IP Address Exchange. 26 5.3.4 Unic

37、ast IP Datagram Conveyance . 27 5.3.5 Broadcast IP Datagram Conveyance . 28 5.3.6 Multicast IP Datagram Conveyance. 28 6. PDU FORMAT DEFINITION 29 6.1 SWEP PDU FORMATS . 29 6.1.1 SWEP Confirmed Data. 29 6.1.2 SWEP Unconfirmed Data. 29 6.1.3 ARP Request and Response 30 6.2 SNDCP PDU FORMATS . 31 6.2.

38、1 PDP Confirmed Data . 31 6.2.2 PDP Unconfirmed Data . 31 6.3 SNDCP CONTROL PDU FORMATS . 32 6.3.1 PDP Context Activation Request 32 6.3.2 PDP Context Activation Accept 33 6.3.3 PDP Context Activation Command 34 6.3.4 PDP Context Activation Reject. 34 6.3.5 PDP Context Deactivation Command 34 7. INF

39、ORMATION ELEMENT DEFINITION. 35 7.1 GENERAL SNDCP PDU FIELDS 35 7.1.1 SNDCP Format. 35 7.1.2 SNDCP Version 35 7.1.3 Network Service Access Point Identifier (NSAPI) 36 7.2 SNDCP CONTROL PDU FIELDS 36 7.2.1 Access Point Name (APN) 36 7.2.2 Data Subscriber Unit Type (DSUT) 37 7.2.3 IP Header Compressio

40、n (IPHC). 37 7.2.4 MDP Configuration Options (MDPCO). 37 7.2.5 PDU Priority Maximum (PDUPM) 38 7.2.6 Van Jacobsen TCP Compression State Slots (VJ_TCP_CSS) 38 7.2.7 TCP Compression State Slots (TCP_CSS) 38 7.2.8 Non-TCP Compression State Slots (NON_TCP_CSS) . 38 7.2.9 Maximum Interval between Full He

41、aders (MAX_INT_FHD) 38 7.2.10 Maximum Time between Full Headers (MAX_TME_FHD) 38 7.2.11 Maximum Header Size (MAX_HDR_SZE) 38 7.2.12 Maximum Transmission Unit (MTU). 39 7.2.13 Deactivation Type 39 7.2.14 Network Address Type (NAT) 39 7.2.15 Reject Code 40 7.2.16 Protocol Configuration Options (PCO) L

42、ength. 40 7.2.17 Protocol Configuration Options (PCO) Value 41 7.2.18 IPv4 Address41 7.2.19 IPv6 Information 41 7.2.20 Mobile IPv4 Information 42 7.2.21 User Data Payload Compression (UDPC) 42 7.3 SNDCP DATA PDU FIELDS. 43 7.3.1 IP Header Compression State (PCOMP) . 43 7.3.2 User Data Payload Compre

43、ssion Type (DCOMP). 43 7.3.3 Network Layer PDU . 43 7.4 TIMERS 43 7.4.1 Activation Wait Timer (T.300) 43 7.4.2 Standby Timer (T.301) 44 7.4.3 Ready Timer (T.302).44 WAI Packet Data Specification TIA-902.BAEB-A v 8. REFERENCES 45 8.1 INFORMATIVE REFERENCES .45 8.2 NORMATIVE REFERENCES 45 TIA-902.BAEB

44、-A WAI Packet Data Specification vi Table of Figures FIGURE 1. GENERAL WIDEBAND DATA SYSTEM MODEL 1 FIGURE 2. MRC SNDCP STATE TRANSITION DIAGRAM. 10 FIGURE 3. FNE SNDCP STATE TRANSITION DIAGRAM 10 FIGURE 4. SUCCESSFUL PDP CONTEXT ACTIVATION MSC . 15 FIGURE 5. SUCCESSFUL PDP CONTEXT DEACTIVATION MSC

45、16 FIGURE 6. SUCCESSFUL MRC TO FNE UNICAST IP DATAGRAM MSC 18 FIGURE 7. SUCCESSFUL FNE TO MRC UNICAST IP DATAGRAM MSC 20 FIGURE 8. SUCCESSFUL MRC TO MRC ARP EXAMPLE MSC. 27 FIGURE 9. SUCCESSFUL MRC TO MRC UNICAST EXAMPLE MSC. 28 FIGURE 10. W_SW_ DATA PDU FORMAT . 29 FIGURE 11. W_SW_ UDATA PDU FORMAT

46、. 29 FIGURE 12. W_ARP_ REQ/RES PDU FORMAT 30 FIGURE 13. W_SN_ DATA PDU FORMAT 31 FIGURE 14. W_SN_ UDATA PDU FORMAT 31 FIGURE 15. W_ACV_CNT_REQ PDU FORMAT . 32 FIGURE 16. W_ACV_CNT_ACC PDU FORMAT. 33 FIGURE 17. W_ACV_CNT_CMD PDU FORMAT 34 FIGURE 18. W_ACV_CNT_REJ PDU FORMAT 34 FIGURE 19. W_DCV_CNT_CM

47、D PDU FORMAT 34 WAI Packet Data Specification TIA-902.BAEB-A vii List of Tables TABLE 1. SNDCP / SWEP SERVICE PRIMITIVES .7 TABLE 2. LLC SERVICE PRIMITIVES 7 TABLE 3. MM SERVICE PRIMITIVES.8 TABLE 4. SNDCP FORMAT VALUES.35 TABLE 5. SNDCP VERSION VALUES 35 TABLE 6. NSAPI VALUES 36 TABLE 7. DSUT VALUE

48、S .37 TABLE 8. IPHC VALUES 37 TABLE 9. MDPCO VALUES .37 TABLE 10. PDUPM VALUES38 TABLE 11. MAX_INT_FHD VALUES38 TABLE 12. MAX_TME_FHD VALUES38 TABLE 13. MTU VALUES.39 TABLE 14. DEACTIVATION TYPE VALUES 39 TABLE 15. NAT VALUES .39 TABLE 16. REJECT CODE VALUES40 TABLE 17. PCO VALUES41 TABLE 18. IPV6 I

49、NFORMATION VALUES .41 TABLE 19. MOBILE IPV4 INFORMATION VALUES 42 TABLE 20. IPHC VALUES 42 TABLE 21. PCOMP VALUES 43 TABLE 22. DCOMP VALUES .43 TABLE 23. STANDBY TIMER VALUES 44 TABLE 24. READY TIMER VALUES.44 DOCUMENT REVISION HISTORY Revision History Version Date Description V 0.50 12/9/2002 Initial draft (Issue A) submitted to TR-8.5 for review. V 0.90 1/7/2003 Second draft (Issue B) submitted to TR-8.5 for review V 0.91 1/14/2003 Third draft (Issue C) submitted to TR-8.5 for review V 0.95 3/25/2003 Fourth draft (Issue D) edited per PN-3-0094 ballot comments Issue E 5/16/2003 Edit