TIA-902 CBAA-2007 Public Safety Wideband Data Equipment Performance Measurement Procedures (IOTA)《公用安全宽带数据设备-性能测量程序》.pdf

1、 TIA-902.CBAA-2007 APPROVED: MARCH 1, 2007 REAFFIRMED: APRIL 23, 2013 TIA-902.CBAA March 2007Public Safety Wideband Data Equipment Performance Measurement Procedures (IOTA) NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandin

2、gs between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect prec

3、lude any member or non-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publica

4、tions are adopted by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purpor

5、t to address all safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Project No

6、. 3-0168-RF1, formulated under the cognizance of the TIA TR-8 Mobile and Personal Private Radio Standards, TR-8.1 Subcommittee on Equipment Measurement Procedures). Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION Technology (b) there is no assurance that the Document will be approved by any Com

7、mittee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending

8、or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with th

9、e Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA op

10、ine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. If the Document contains one or more

11、Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional e

12、lements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see

13、Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending

14、patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAI

15、MED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONS

16、IBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO CO

17、MPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS,

18、LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS

19、 HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. TIA-902.CBAA i Foreword This foreword is not part of this standard TIA-902.CBAA is a Standard developed and maintained by TR-8.1 Subcommittee on Transceiver Measurement methods under the sponsorship of the Telecommun

20、ications Industry Association. This standard represents the consensus of the formulating subcommittee at the time of publication. This document describes the methods of measurement for wideband digital land mobile radio equipment using IOTA modulation. These methods are necessary to provide a basis

21、for ascertaining performance of equipment of various manufacturers. Project PN-3-0168 was established to develop TIA-902.CBAA, Wideband Data Equipment Performance Measurement Procedures (IOTA). TIA-902.CBAA ii This page intentionally left blank TIA-902.CBAA iii Contents 1 INTRODUCTION1 1.1 Scope1 1.

22、2 Object1 1.3 References .1 1.4 Standard Definitions.2 1.4.1 Definitions of Physical Values.2 1.4.2 Abbreviations/Acronyms .2 1.4.3 Common Definitions4 1.4.3.1 Standard Continuous Duty Cycle for Portable, Mobile and Base Equipment4 1.4.3.2 Standard Intermittent Duty Cycle for Portable, Mobile and Ba

23、se Equipment4 1.4.3.3 Standard Duty Cycle for Portable Equipment.4 1.4.3.4 Assigned Channel Bandwidths .5 1.4.3.5 Standard Modulation of an Input Signal5 1.4.3.6 Specified data rates .5 1.4.3.7 Adjacent Channel 6 1.4.4 Definitions for Receivers .6 1.4.4.1 Input Signal Level for Testing Receivers Wit

24、h Suitable Antenna Terminals .6 1.4.4.2 Standard Input Signal 7 1.4.4.3 Standard Input Signal Level 7 1.4.4.4 Standard Input Signal Frequency7 1.4.4.5 Standard Test Patterns8 1.4.4.6 Standard Message Error Rate (MER).17 1.4.4.7 Standard Bit Error Rate (BER) 17 1.4.4.8 Standard Fading Profiles.17 1.4

25、.5 Definitions for Transmitters .18 1.4.5.1 Standard Transmitter Load18 1.4.5.2 Standard Transmitter Test Pattern18 1.4.6 Definitions for Environmental Testing.19 1.4.6.1 Deviation From Standard (DFS)19 1.5 Standard Test Conditions 19 1.5.1 Basic Equipment Under Test19 1.5.2 Associated Equipment 19

26、1.5.3 Special Function Subsystems.20 1.5.4 Standard Conditions for the Power Supply 20 1.5.4.1 General.20 1.5.4.2 Default Standard Test Voltages for Battery Chemistry Types .20 1.5.4.3 Standard Test Voltage for Equipment Powered by Integral Batteries21 1.5.4.4 Standard Test Voltage for Equipment Pow

27、ered by External Batteries21 TIA-902.CBAA iv 1.5.4.5 Other Power Sources 22 1.5.4.6 Standard ac Voltage and Frequency 22 1.5.5 Standard Atmospheric Conditions23 1.6 Characteristics of Test Equipment.23 1.6.1 RF Digital Modulated Signal Generators23 1.6.2 Test Pattern Generator .24 1.6.3 Digital Mult

28、imeter.24 1.6.4 RF Power Meter 25 1.6.5 Spectrum Analyzer25 1.6.6 Standard Receiver.26 1.6.7 Adjacent Channel Power Analyzer.26 1.6.8 Frequency Counter .26 1.6.9 Oscilloscope 27 1.6.10 RF Attenuator 27 1.6.11 RF Detector .28 1.6.12 Directional Coupler28 1.6.13 50 Ohm Termination .28 1.6.14 RF Combin

29、ing Network.29 1.6.15 Notch Filter 29 1.6.16 Constant Impedance Line Stretcher (CILS) .29 1.6.17 Line Impedance Stabilization Network (LISN) .30 1.6.18 Variable dc Power Supply.30 1.6.19 Variable ac Power Supply.30 1.6.20 Standard Radiation Test Site (3 meter)31 1.6.21 Standard Radiation Test Site (

30、30 meter)31 1.6.22 Message Error Rate Detector.32 1.6.23 Bit Error Rate Detector33 1.6.24 Faded Channel Simulator .33 1.6.25 RF Decoder and Protocol Analyzer34 1.6.26 Error Vector Magnitude Analyzer .34 1.6.27 Base Station Emulator 36 1.6.28 Slotted RF Power Analyzer.36 1.6.29 RF Anechoic Chamber36

31、1.6.30 Gigahertz Transverse Electromagnetic Cell (GTEM) 37 2 METHODS OF MEASUREMENT .39 2.1 Methods of Measurement for Receivers .39 2.1.1 Radiated Spurious Field Strength.39 2.1.1.1 Definition 39 2.1.1.2 Method of Measurement .39 2.1.1.3 Alternate Method of Measurement (Using a GTEM Cell) 41 2.1.2

32、Conducted Spurious Output Power42 2.1.2.1 Definition 42 2.1.2.2 Method of Measurement .42 2.1.3 Power Line Conducted Spurious Output Voltage 43 2.1.3.1 Definition 43 2.1.3.2 Method of Measurement .43 TIA-902.CBAA v 2.1.4 Receiver Sensitivity.44 2.1.4.1 Definition 44 2.1.4.2 Method of Measurement .44

33、 2.1.5 Faded Receiver Sensitivity .45 2.1.5.1 Definition 45 2.1.5.2 Method of Measurement .46 2.1.6 Adjacent Channel Rejection .46 2.1.6.1 Definition 46 2.1.6.2 Method of Measurement for Adjacent Channel Rejection .46 2.1.7 Co-Channel Rejection.48 2.1.7.1 Definition 48 2.1.7.2 Method of Measurement

34、.48 2.1.8 Spurious Response Rejection 49 2.1.8.1 Definition 49 2.1.8.2 Method of Measurement .49 2.1.9 Intermodulation Rejection .50 2.1.9.1 Definition 50 2.1.9.2 Method of Measurement .51 2.1.10 Average Radiation Sensitivity .52 2.1.10.1 Definition 52 2.1.10.2 Method of Measurement .52 2.1.11 Bit E

35、rror Rate Floor .53 2.1.11.1 Definition 53 2.1.11.2 Method of Measurement .54 2.2 Methods of Measurement for Transmitters .55 2.2.1 RF Output Power.55 2.2.1.1 Definition 55 2.2.1.2 Method of Measurement .55 2.2.2 Operating Frequency Accuracy 56 2.2.2.1 Definition 56 2.2.2.2 Method of Measurement (AF

36、C disabled)56 2.2.2.3 Method of Measurement (For Transmitters with AFC Locked to the Base Station) .57 2.2.3 Unwanted Emissions: Radiated Spurious58 2.2.3.1 Definition 58 2.2.3.2 Method of Measurement .58 2.2.3.3 Method of Measurement (EIRP in GNSS Band: 1.559 to 1.610 GHz)61 2.2.3.4 Method of Measu

37、rement (Calculated EIRP in the GNSS Band: 1.559 to 1.610 GHz).63 2.2.4 Unwanted Emissions: Conducted Spurious.64 2.2.4.1 Definition 64 2.2.4.2 Method of Measurement .64 2.2.5 Unwanted Emissions: Non-Spurious Adjacent Channel Power Ratio 67 2.2.5.1 Definition 67 2.2.5.2 Method of Measurement .67 2.2.

38、6 Intermodulation Attenuation68 2.2.6.1 Definition 68 TIA-902.CBAA vi 2.2.6.2 Method of Measurement .68 2.2.7 Radiated Power Output.70 2.2.7.1 Average Radiated Power Output 70 2.2.7.2 Effective Radiated Power (ERP).72 2.2.8 Conducted Spurious Emission into VSWR 74 2.2.8.1 Definition 74 2.2.8.2 Metho

39、d of Measurement .74 2.2.9 Error Vector Magnitude.76 2.2.9.1 Definition 76 2.2.9.2 Method of Measurement .76 2.3 Time measurements 76 2.3.1 TDM Temporal Offset76 2.3.1.1 Method of Measurement .77 2.4 Methods of Measurement for Unit Characteristics79 2.4.1 Power Supply Voltage Range.79 2.4.1.1 Method

40、 of Measurement .79 2.4.2 Temperature Range79 2.4.2.1 Method of Measurement .79 2.4.3 High Humidity 80 2.4.3.1 Definition 80 2.4.3.2 Method of Measurement .80 2.4.4 Vibration Stability.81 2.4.4.1 Definition 81 2.4.4.2 Method of Measurement .81 2.4.5 Shock Stability.81 2.4.5.1 Definition 81 2.4.5.2 M

41、ethod of Measurement .82 2.4.6 Battery Life.82 2.4.6.1 Definition 82 2.4.6.2 Method of Measurement .82 2.4.7 Dimensions83 2.4.7.1 Definition 83 2.4.7.2 Method of Measurement .83 2.4.8 Weight83 2.4.8.1 Definition 83 2.4.8.2 Method of Measurement .83 2.4.9 Other Environmental .84 2.4.9.1 Definition 84

42、 2.4.9.2 Method of Measurement .84 Annex A (normative)85 TIA-902.CBAA vii Revision History Version Date Description TIA-902.CBAA April 2007 Initial publication Definitions TIA-902.CBAA 1 1 INTRODUCTION 1.1 Scope This standard provides definition and methods of measurement standards for radio equipme

43、nt used in the Private (Dispatch) Land Mobile Services that employ Isotropic Orthogonal Transform Algorithm modulation (IOTA), for transmission and reception of data using digital techniques, with or without encryption, with a frequency of 1 GHz or less. The definition and description of the system

44、in which this equipment operates is given in the document TIA-902-A 1 The TIA Wideband Air Interface standard (IOTA) TIA-902.BBAB 2 defines the requirements of both the Physical Layer and the Data Link Layer in the OSI reference model for the radio interface in which this equipment operates. Use of

45、this standard is encouraged for any application of similar equipment with IOTA modulation and may be applicable to equipment other than those listed above. However, this standard is not intended to cover transceiver equipment employing any or all modulation types or access methods. Therefore, the ap

46、plicability of this document to digital transceiver equipment other than that called out in the scope must be carefully examined. 1.2 Object The object of this standard is to standardize parameter titles, definitions, the test conditions, and the methods of measurement used to ascertain the performa

47、nce of equipment within the scope of this standard, and to make possible a meaningful comparison of the results of measurements made by different observers and on different equipment. 1.3 References The following standards contain provisions that, through reference in this text, constitute provision

48、s of this standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards published by them. 1 (Informa

49、tive) TSB-902.A Digital Radio Technical Standards - Public Safety Wideband Data Standards Project - Wideband Data System and Standards Definition. December 2001, Telecommunications Industry Association. TIA-902.CBAA Definitions 2 2 TIA-902.BBAB Wideband Air Interface Isotropic Orthogonal Transform Algorithm (IOTA) Physical Layer Specification Public Safety Wideband Data Standards Project Digital Radio Technical Standards. August 2002, Telecommunications Industry Association. 3 TIA-902.BAAC Wideband Air Interface Media Access Control / Radio Link Adaptation (MAC/RLA) Layer Speci