1、 TIA-919-B September 2011Signaling Conformance Specification for High Rate Packet Data Air Interface NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability
2、 and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of TIA from manufacturing or selling produ
3、cts not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accordance with the American National Standa
4、rds Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems associated with its use or all applicab
5、le regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Project No. 3-0057-RV2, formulated under the cognizance of the TIA TR-45 Mobile (b
6、) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involv
7、e the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a stat
8、ement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or condit
9、ions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respect
10、s the Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise),
11、whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Refer
12、ence; (ii) TIAs policy of encouragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identifi
13、cation to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the cont
14、ents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTE
15、LLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT
16、 OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENT
17、AL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NE
18、GATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. 3GPP2 C.S0038-B v1.0 iii CONTENTS 1 FOREWORD xi 2 SCOPE xiii 3 REFERENCES xv 4 1 Overview 1-1 5 1.1 Objectives.1-1 6 1.2 Requirements Language .1-1
19、 7 1.3 Document Organization 1-1 8 1.4 Abbreviations, Acronyms and Terms 1-2 9 1.5 Notation1-6 10 2 Default Signaling Application Tests2-1 11 2.1 Default Signaling Link Protocol Tests 2-1 12 2.1.1 Access Network Tests2-1 13 2.1.2 Access Terminal Tests 2-4 14 3 Default Packet Application Tests 3-1 15
20、 3.1 Radio Link Protocol Tests 3-1 16 3.1.1 Access Network RLP Tests 3-1 17 3.1.2 Access Terminal RLP Tests.3-5 18 3.2 Location Update Protocol Tests3-10 19 3.2.1 Access Network Tests3-10 20 3.2.2 Access Terminal Tests 3-10 21 3.3 Flow Control Protocol Tests3-11 22 3.3.1 Access Network Tests3-11 23
21、3.3.2 Access Terminal Tests 3-12 24 4 Multi-flow Application Protocol Tests 4-1 25 4.1 Radio Link Protocol Tests 4-1 26 4.1.1 Access Network RLP Tests 4-1 27 4.1.2 Access Terminal RLP Tests.4-5 28 4.2 Data Over Signaling Protocol Tests.4-11 29 4.2.1 Access Network Tests4-11 30 4.2.2 Access Terminal
22、Tests 4-14 31 3GPP2 C.S0038-B v1.0 iv 4.3 Location Update Protocol Tests4-16 1 4.3.1 Access Network Tests4-17 2 4.3.2 Access Terminal Tests 4-17 3 4.4 Flow Control Protocol Tests4-19 4 4.4.1 Access Network Tests4-19 5 4.4.2 Access Terminal Tests 4-20 6 5 Stream Layer Protocol Tests .5-1 7 5.1 Defaul
23、t Stream Protocol Tests.5-1 8 5.1.1 Access Network Tests5-1 9 5.1.2 Access Terminal Tests 5-1 10 6 Session Layer Tests 6-1 11 6.1 Default Session Management Protocol Tests .6-1 12 6.1.1 Access Network Tests6-1 13 6.1.2 Access Terminal Tests 6-4 14 6.2 Default Address Management Protocol Tests .6-5 1
24、5 6.2.1 Access Network Tests6-5 16 6.2.2 Access Terminal Tests 6-7 17 6.3 Default Session Configuration Protocol Tests 6-14 18 6.3.1 Access Network Tests6-14 19 6.3.2 Access Terminal Tests 6-15 20 7 Connection Layer Tests 7-1 21 7.1 Default Air-Link Management Protocol Tests 7-1 22 7.1.1 Access Netw
25、ork Tests7-1 23 7.1.2 Access Terminal Tests 7-3 24 7.2 Default Initialization State Protocol Tests7-4 25 7.2.1 Access Network Tests7-4 26 7.2.2 Access Terminal Tests 7-5 27 7.3 Default Idle State Protocol Tests .7-7 28 7.3.1 Access Network Tests7-7 29 7.3.2 Access Terminal Tests 7-8 30 7.4 Enhanced
26、Idle State Protocol Tests .7-11 31 7.4.1 Access Network Tests7-11 32 3GPP2 C.S0038-B v1.0 v 7.4.2 Access Terminal Tests 7-13 1 7.5 Default Connected State Protocol Tests7-16 2 7.5.1 Access Network Tests7-16 3 7.5.2 Access Terminal Tests 7-17 4 7.6 Default Route Update Protocol Tests .7-18 5 7.6.1 Ac
27、cess Network Tests7-18 6 7.6.2 Access Terminal Tests 7-19 7 7.7 MC Route Update Protocol Tests7-22 8 7.7.1 Access Network Tests7-22 9 7.7.2 Access Terminal Tests 7-23 10 7.8 Overhead Messages Protocol Tests .7-29 11 7.8.1 Access Network Tests7-29 12 7.8.2 Access Terminal Tests 7-31 13 8 Security Lay
28、er Tests .8-1 14 8.1 DH Key Exchange Protocol Tests .8-1 15 8.1.1 Access Network Test .8-1 16 8.1.2 Access Terminal Test8-2 17 8.2 SHA-1 Authentication Protocol Tests8-4 18 8.2.1 Access Network Test .8-4 19 8.2.2 Access Terminal Test8-5 20 8.3 Security Protocol Tests 8-6 21 8.3.1 Access Network Test
29、 .8-6 22 8.3.2 Access Terminal Test8-7 23 9 Mac Layer Tests.9-1 24 9.1 Default Control Channel MAC Protocol Tests .9-1 25 9.1.1 Access Network Test .9-1 26 9.1.2 Access Terminal Test9-2 27 9.2 Enhanced Control Channel MAC Protocol Tests.9-3 28 9.2.1 Access Network Test .9-3 29 9.2.2 Access Terminal
30、Test9-6 30 9.3 Default Access Channel MAC Protocol Tests9-6 31 9.3.1 Access Network Tests9-6 32 3GPP2 C.S0038-B v1.0 vi 9.3.2 Access Terminal Tests 9-7 1 9.4 Enhanced Access Channel MAC Protocol Tests .9-8 2 9.4.1 Access Network Tests9-8 3 9.4.2 Access Terminal Tests 9-9 4 9.5 Default Forward Traffi
31、c Channel MAC Protocol Tests 9-10 5 9.5.1 Access Network Tests9-10 6 9.5.2 Access Terminal Tests 9-12 7 9.6 Enhanced Forward Traffic Channel MAC Protocol Tests 9-13 8 9.6.1 Access Network Tests9-13 9 9.6.2 Access Terminal Tests 9-14 10 9.7 Default Reverse Traffic Channel MAC Protocol Tests 9-16 11 9
32、.7.1 Access Network Tests9-16 12 9.7.2 Access Terminal Tests 9-17 13 9.8 Subtype 3 Reverse Traffic Channel MAC Protocol 9-18 14 9.8.1 Access Network Tests9-18 15 9.8.2 Access terminal Tests .9-18 16 9.9 MultiCarrier Reverse Traffic Channel MAC Protocol .9-41 17 9.9.1 Access Network Tests9-41 18 9.9.
33、2 Access terminal Tests .9-41 19 10 Physical Layer Tests10-1 20 10.1 Transmitter Tests .10-1 21 10.1.1 Access Network Tests10-1 22 10.1.2 Access Terminal Tests 10-2 23 10.2 Demodulation of the Reverse Activity Channel .10-5 24 10.2.1 Access Network Tests10-5 25 10.2.2 Access Terminal Tests 10-5 26 1
34、1 Broadcast Protocol Tests 11-1 27 11.1 Generic Broadcast Protocol Tests11-1 28 11.1.1 Access Network Tests11-1 29 11.1.2 Access Terminal Tests 11-1 30 12 Figures .12-1 31 13 Annex (Informative) .13-1 32 33 3GPP2 C.S0038-B v1.0 vii TABLES 1 Table 9.8.2.1.3-1 T2PMaxPilotStrength 9-20 2 Table 9.8.2.1.
35、3-2 BucketFactor 9-20 3 Table 9.8.2.1.3-3 T2PInflowRange 9-21 4 Table 9.8.2.1.3-4 T2PUp and T2PDn . 9-22 5 Table 9.8.2.1.4-1 End to End Minimum Standard 9-23 6 Table 9.8.2.1.4-2 Minimum Requirement for TxT2P Ramping Up 9-24 7 Table9.8.2.1.4-3 Minimum Requirement for TxT2P Ramping Down 9-25 8 Table 9
36、.8.2.2.3-1 T2PInflowRange 9-27 9 Table 9.8.2.2.3-2 BucketFactor 9-27 10 Table 9.8.2.2.3-3 T2Pup and T2PDn . 9-28 11 Table 9.8.2.2.4-1 Minimum Requirement for Fixed Allocation TxT2P Ramping 9-29 12 Table 9.8.2.3.3-1 T2PInflowRange 9-30 13 Table 9.8.2.4.3-1 T2PMaxPilotStrength 9-32 14 Table 9.8.2.4.3-
37、2 BucketFactor 9-32 15 Table 9.8.2.4.3-2 T2PInflowRange 9-32 16 Table 9.8.2.4.3-3 T2PUp and T2PDn . 9-33 17 Table 9.8.2.4.4-1 Minimum Requirement for T2PInflow Decay 9-34 18 Table 9.8.2.5.3-1 T2PMaxPilotStrength 9-35 19 Table 9.8.2.5.3-2 BucketFactor 9-36 20 Table 9.8.2.5.3-3 T2PInflowRange 9-36 21
38、Table 9.8.2.5.3-4 T2PUp and T2PDn . 9-37 22 Table 9.8.2.5.4-1 Minimum Requirement for T2PInflow Decay 9-38 23 Table 9.8.2.6.3-1 T2PMaxPilotStrength 9-39 24 Table 9.8.2.6.3-2 BucketFactor 9-39 25 Table 9.8.2.6.3-3 T2PUp and T2PDn . 9-40 26 Table 10.1.2.1.3-1 ocor I/I and ocI . 10-3 27 Table 10.1.2.2.
39、3-1 Pilot . 10-4 28 Table 10.2.2.1.3-1 ocor I/I and ocI . 10-6 29 Table 10.1.2.2.3-2 Pilot . 10-7 30 Table 10.1.2.2.3-3 RABOffset and RABLength 10-7 31 3GPP2 C.S0038-B v1.0 viii No Text. 1 2 3GPP2 C.S0038-B v1.0 ix FIGURES 1 Figure 12.1 Conformance Requirements for Testing PermittedPayloadPS_k 12-1
40、2 Figure 12.2 Functional Setup for FTC Redundant ACK . 12-1 3 Figure 12.3 Functional Setup for Reverse Traffic Channel Response to ARQ Channel 4 and Demodulation of the Reverse Activity Channel Tests . 12-2 5 Figure 12.4 Functional Setup for one FTC response to ACK channel and Connection 6 Security
41、and Session Layer Tests . 12-2 7 Figure 12.5 Functional Setup for Routing of UATIAssignment and 8 TrafficChannelAssignment Messages Tests 12-3 9 10 11 12 13 3GPP2 C.S0038-B v1.0 x No Text. 1 2 3GPP2 C.S0038-B v1.0 xi 1 FOREWORD 2 (This foreword is not part of this Standard) 3 This standard was prepa
42、red by Technical Specification Group C of the Third Generation 4 Partnership Project 2 (3GPP2). This standard is a companion to the cdma20001 high rate 5 packet data standards. This specification provides a set of procedures that the access 6 terminal and the access network can use to conduct the si
43、gnaling conformance tests in a 7 laboratory environment. 8 9 1 “cdma2000 is the trademark for the technical nomenclature for certain specifications and standards of the Organizational Partners (OPs) of 3GPP2. Geographically (and as of the date of publication), cdma2000 is a registered trademark of t
44、he Telecommunications Industry Association (TIA-USA) in the United States.” 3GPP2 C.S0038-B v1.0 xii No Text. 1 2 3GPP2 C.S0038-B v1.0 xiii SCOPE 1 (This scope is not part of this Standard) 2 These technical requirements form a standard for signaling conformance i n cdma2000 3 high rate packet data
45、systems. These requirements ensure that compliant access 4 terminals and compliant access networks can execute tests in meeting the objectives 5 stated in 1.1. 6 7 3GPP2 C.S0038-B v1.0 xiv No Text. 1 2 3GPP2 C.S0038-B v1.0 xv REFERENCES 1 2 The following standards and documents contain provisions, w
46、hich, through reference in 3 this text, constitute provisions of this specification. At the time of publication, the editions 4 indicated were valid. All standards are subject to revision, and partie s to agreements based 5 on this standard are encouraged to investigate the possibility of applying t
47、he most recent 6 editions of the standards indicated below. References 1 to 4 are normative references, 7 while reference 5 is informative. 8 9 1 3GPP2 C.S0024-B, cdma2000 High Rate Packet Data Air Interface Specification. 10 2 3GPP2 C.S0044-A v1.0, Interoperability Specification for cdma2000 Air In
48、terface. 11 3 3GPP2 C.S0054-0, cdma2000 High Rate Broadcast-Multicast Packet Data Air Interface 12 Specification. 13 4 3GPP2 C.S0029-B. Test Application Specification (TAS) for High Rate Packet Data Air 14 Interface 15 5 3GPP2 C.R1001-F, Administration of Parameter Value Assignments for cdma2000 16
49、Spread Spectrum Standards, Release F. (Informative reference) 17 18 3GPP2 C.S0038-B v1.0 xvi No Text.1 3GPP2 C.S0038-B v1.0 1-1 1 OVERVIEW 1 1.1 Objectives 2 The objective of the test procedures contained herein is to demonstrate that access 3 terminal/access network implementation of signaling functionality in a cabled test 4 environment at nominal levels is in conformance with 1. 5 1.2 Requirements Language 6 “Shall” and “shall not” identify requirements to be followed strictly to conform to the 7 standard and from which no deviation is permitted. “Should” and “s
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1