TIA-920 120-A-2012 Telecommunications Telephone Terminal Equipment Transmission Requirements for Wideband Digital Wireline Telephones with Speakerphone.pdf

1、 TIA-920.120-A November 2012Telecommunications Telephone Terminal Equipment Transmission Requirements for Wideband Digital Wireline Telephones with Speakerphone NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between m

2、anufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any mem

3、ber or non-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are ad

4、opted by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address

5、 all safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Project No. TIA-PN-920

6、.120-A, formulated under the cognizance of the TIA TR-41 User Premises Telecommunications Requirements, TR-41.3 Subcommittee on Analog and Digital Wireline Terminals). Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION Standards and Technology Department 2500 Wilson Boulevard Arlington, VA 22201 U

7、.S.A. PRICE: Please refer to current Catalog of TIA TELECOMMUNICATIONS INDUSTRY ASSOCIATION STANDARDS AND ENGINEERING PUBLICATIONS or call IHS, USA and Canada (1-877-413-5187) International (303-397-2896) or search online at http:/www.tiaonline.org/standards/catalog/ All rights reserved Printed in U

8、.S.A. NOTICE OF COPYRIGHT This document is copyrighted by the TIA. Reproduction of these documents either in hard copy or soft copy (including posting on the web) is prohibited without copyright permission. For copyright permission to reproduce portions of this document, please contact the TIA Stand

9、ards Department or go to the TIA website (www.tiaonline.org) for details on how to request permission. Details are located at: http:/www.tiaonline.org/standards/catalog/info.cfm#copyright or Telecommunications Industry Association Technology (b) there is no assurance that the Document will be approv

10、ed by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), inclu

11、ding pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accor

12、dance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, no

13、r will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. If the Document contains

14、 one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference consists of mandatory, alternate

15、or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary dis

16、closure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or publi

17、shed pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED

18、, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AN

19、D ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR R

20、ENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS

21、OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF

22、 THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. TIA-920.120-A ii Table of Contents 1. SCOPE 4 1.1. LIMITS OF APPLICABILITY 4 1.2. LIMITS OF THIS STANDARD FOR PRODUCT EVALUATION 4 1.3. CATEGORIES OF CRITERIA . 5 1.4. ENVIRONMENTAL . 5 1.5. SAFETY . 5 2

23、. NORMATIVE REFERENCES 6 3. DEFINITIONS, ABBREVIATIONS AND ACRONYMS . 7 3.1. DEFINITIONS . 7 3.2. ABBREVIATIONS AND ACRONYMS . 9 4. GENERAL TECHNICAL REQUIREMENTS 10 4.1. TEST ENVIRONMENT BACKGROUND NOISE 10 4.2. REFERENCE CODECS 10 4.2.1. L16-256 Reference Codec. 11 4.2.2. Other Reference Codecs 11

24、 4.3. TEST SIGNALS 11 4.3.1. Test Stimulus Signal . 11 4.3.2. Analysis . 12 4.4. PRECAUTIONS . 12 4.5. TEST ARRANGEMENTS . 12 4.5.1. Reference Codec Arrangement . 12 4.5.2. Direct Digital Signal Processing Arrangement . 13 4.5.3. Send General Test Arrangement . 13 4.5.4. Receive General Test Arrange

25、ment 14 4.5.5. Terminal Coupling Loss General Test Arrangement 14 4.5.6. Send Level Directionality Test Arrangement 15 5. SPEAKERPHONE TECHNICAL REQUIREMENTS . 16 5.1. SEND. 16 5.1.1. Speakerphone Send Electrical Output . 16 5.1.2. Speakerphone Send Frequency Response . 17 5.1.3. Send Directionality

26、 . 19 5.1.4. Speakerphone Send Noise . 19 5.1.5. Speakerphone Send Single Frequency Interference 20 5.1.6. Speakerphone Send Distortion and Noise . 20 5.1.7. Speakerphone Send Delay. 22 5.2. RECEIVE . 23 5.2.1. Speakerphone Receive Acoustic Output . 23 5.2.2. Speakerphone Receive Volume Control . 24

27、 5.2.3. Speakerphone Receive Frequency Response 24 5.2.4. Speakerphone Receive Noise 26 5.2.5. Speakerphone Receive Single Frequency Interference . 26 5.2.6. Speakerphone Receive Distortion and Noise 27 5.2.7. Speakerphone Receive Delay 28 5.3. TALKER SIDETONE CONSIDERATIONS . 29 TIA-920.120-A iii 5

28、.4. WEIGHTED TERMINAL COUPLING LOSS (TCLW) 30 5.4.1. Requirements 30 5.4.2. Measurement Method . 31 ANNEX A (NORMATIVE) SPEAKERPHONE RECEIVE LOUDNESS RATING (RLR)32 ANNEX B (NORMATIVE) SPEAKERPHONE SEND LOUDNESS RATING (SLR) . 33 ANNEX C (NORMATIVE) CALCULATION OF LOUDNESS RATINGS . 34 C.1 WIDEBAND

29、SEND LOUDNESS RATING (HANDSET, SPEAKERPHONE AND HEADSET) 34 C.2 WIDEBAND RECEIVE LOUDNESS RATING (SPEAKERPHONE ONLY) . 34 ANNEX D (INFORMATIVE) MEASUREMENT AND LEVEL CONVERSIONS 36 ANNEX E (INFORMATIVE) R40 PREFERRED FREQUENCIES . 37 ANNEX F (INFORMATIVE) TERMS RELATED TO DIGITAL TRANSMISSION LEVELS

30、 40 ANNEX G (INFORMATIVE) - RECOMMENDATIONS FOR SUBJECTIVE QUALITY EVALUATION . 42 G.1 SEND LOUDNESS . 43 G.2 SEND NOISE 43 G.3 SEND DISTORTION 44 G.4 ACOUSTIC ECHO CANCELLATION PERFORMANCE DURING SINGLE-TALK 44 G.5 ACOUSTIC ECHO CANCELLATION PERFORMANCE DURING DOUBLE-TALK 45 ANNEX H (INFORMATIVE) B

31、NR STUDY 46 H.1 OBJECTIVES 46 H.2 APPARATUS 46 H.3 PROCEDURE 46 H.4 PRELIMINARY RESULTS . 46 H.5 RECOMMENDATIONS 47 H.6 TABLE OF RESULTS 47 ANNEX I (INFORMATIVE) BIBLIOGRAPHY . 49 TIA-920.120-A iv Table of Figures Figure 1 Digital Telephone Set Test Arrangement with Reference Codec . 12 Figure 2 Dig

32、ital Telephone Set Test Arrangement using Direct Digital Signaling . 13 Figure 3 Speakerphone Send Test Setup . 13 Figure 4 Speakerphone Receive Test Setup 14 Figure 5 Terminal Coupling Loss Test Setup 14 Figure 6 Speakerphone Send Level Directionality Measurement Setup . 15 Figure 7 Speakerphone Se

33、nd Frequency Response Mask . 18 Figure 8 Speakerphone Receive Frequency Response Mask 25 Table of Tables Table 1 Co-ordinates of Speakerphone Send Response Limits . 18 Table 2 Send Directionality Limits . 19 Table 3 Limits for Send SDNR vs. Frequency 20 Table 4 Limits for Send SDNR vs. Level 20 Tabl

34、e 5 Send SDNR Stimulus Center Frequencies and Band Limits 21 Table 6 Send SDNR Analysis Notch Frequency Band . 21 Table 7 Speakerphone Send Delay Requirements . 22 Table 8 Co-ordinates of Speakerphone Receive Response Limits 25 Table 9 Limits for Receive SDNR vs. Frequency . 27 Table 10 Limits for R

35、eceive SDNR vs. Level . 27 Table 11 Receive SDNR Stimulus Center Frequencies and Band Limits . 28 Table 12 Receive SDNR Analysis Notch Frequency Band 28 Table 13 Speakerphone Receive Delay Requirements 29 Table C.1 Weighting Factors for Calculating Wideband Loudness Ratings and STMR 35 Table E.1 ISO

36、 R40 and R10 Preferred Frequencies, 1/12th and 1/3rd Octave Frequencies . 38 Table H.1 Room Noise 35 dBA User Acceptance Levels . 47 Table H.2 Room Noise 45 dBA User Acceptance Levels . 48 Table H.3 Room Noise 55 dBA User Acceptance Levels . 48 TIA-920.120-A 1 FOREWORD (This foreword is not part of

37、this standard.) This document is a TIA Telecommunications standard produced by Working Group TR-41.3.3 of Committee TR-41. This standard was developed in accordance with TIA procedural guidelines, and represents the consensus position of the Working Group and its parent Subcommittee TR-41.3, which s

38、erved as the formulating group. This standard is based on TIA-920. There are eight annexes in this Standard. Annex A, Annex B and Annex C are normative and are considered part of this Standard. Annex D, Annex E, Annex F, Annex G, Annex H and Annex I are informative and are not considered part of thi

39、s Standard. The leadership of the TR-41.3.3 VoIP and PCM Digital Transmission Performance Working Group (Chair: Allen Woo, Plantronics) acknowledges the written contributions provided by the following individuals in the development of this standard. Organization Representative Previous Version TIA-9

40、20.120-A Harman International Glenn Hess Editor AST Technology Labs Don McKinnon Editor Plantronics Steve Graham Editor Nortel Networks Roger Britt Editor Siemens Ron Magnuson Editor Alcatel Francois Pinier AST Technology Labs James Bress Cisco Systems Ram Jagadeesan Cisco Systems Michael Knappe Cis

41、co Systems Kirit Patel IEEE STIT John Bareham IEEE STIT Rodolfo Ceruti IEEE STIT Bob Young Intel Corporation Mike Dunn Microsoft Robert Aichner Microsoft Hong Sodoma PictureTel Corporation Dave Lindbergh Plantronics Bill Rains Plantronics Allen Woo Polycom Peter Baker Texas Instruments Warren Karape

42、tian Uniden Al Baum Whitesell Consulting Steve Whitesell TIA-920.120-A 2 Copyrighted parts of ITU-T Appendix I to Recommendation G.113 and Recommendation P.79 are used with permission of the ITU. The ITU owns the copyright for the ITU Recommendations. Copyrighted parts of ISO 3 are used with permiss

43、ion of the ISO. The ISO owns the copyright for the ISO Standards. Suggestions for improvement of this standard are welcome. They should be sent to: Telecommunications Industry Association Engineering Department Suite 300 250 Wilson Boulevard Arlington, VA 22201 ( http:/www.tiaonline.org ) TIA-920.12

44、0-A 3 Introduction This revision of TIA-920 establishes speakerphone audio performance requirements for wideband digital wireline telephones regardless of protocol or digital format. Significant improvements and corrections have been made. For devices that also have a handset or headset or both, sta

45、ndards TIA-920.110-A and TIA-920.130-A, respectively, apply. A significant change to this standard is the addition of output level measurements for send and receive. Send and receive parameters may be measured using either the output level method or the loudness rating method. It is the intent to re

46、move loudness ratings from future versions of this standard. Wideband is nominally defined as the frequency range between 150 and 6800 Hz. Performance requirements for conventional narrowband telephony in the frequency range between 300 and 3400 Hz are established in ANSI/TIA-810-B. TIA-920.120-A 4

47、Telephone Terminal Equipment Transmission Requirements for Wideband Digital Wireline Telephones with Speakerphone 1. Scope This standard establishes transmission performance requirements for speakerphone devices that function as wideband digital wireline telephones. Group speakerphones that are comm

48、only used in large conference rooms and with larger groups of people are outside the scope of this document. Transmission may be over any digital interface including Local or Wide Area Networks, Firewire/IEEE Std 1394, Universal Serial Bus (USB), public ISDN or digital over twisted pair wire. This i

49、ncludes TDM-based and packet-based (e.g. VoIP) transmission protocols. These telephones may be connected through modems, voice gateways, wireless access points, or PBXs, or they may be personal-computer-based telephones. Examples include, but are not limited to: ISDN telephones, digital proprietary telephones, VoIP telephones (corded and cordless), softphones running on personal computers, IEEE Std 802.11 telephones, USB tele