TIA-920 130-A-1-2012 Telecommunications Telephone Terminal Equipment Transmission Requirements for Wideband Digital Wireline Telephones with Headset Addendum 1 (Addendum to TIA-920.pdf

1、 TIA-920.130-A-1 (Addendum to TIA-920.130-A) July 2012Telecommunications Telephone Terminal Equipment Transmission Requirements for Wideband Digital Wireline Telephones with Headset Addendum 1 NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through elimina

2、ting misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not

3、 in any respect preclude any member or non-member of TIA from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. S

4、tandards and Publications are adopted by TIA in accordance with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Stan

5、dard does not purport to address all safety problems associated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its u

6、se. (From Project No. TIA-PN-920.130-A-1, formulated under the cognizance of the TIA TR-41 User Premises Telecommunications Requirements, TR-41.3 Subcommittee on Analog and Digital Wire line Terminals. Published by TELECOMMUNICATIONS INDUSTRY ASSOCIATION Standards and Technology Department 2500 Wils

7、on Boulevard Arlington, VA 22201 U.S.A. PRICE: Please refer to current Catalog of TIA TELECOMMUNICATIONS INDUSTRY ASSOCIATION STANDARDS AND ENGINEERING PUBLICATIONS or call IHS, USA and Canada (1-877-413-5187) International (303-397-2896) or search online at http:/www.tiaonline.org/standards/catalog

8、/ All rights reserved Printed in U.S.A. NOTICE OF COPYRIGHT This document is copyrighted by the TIA. Reproduction of these documents either in hard copy or soft copy (including posting on the web) is prohibited without copyright permission. For copyright permission to reproduce portions of this docu

9、ment, please contact the TIA Standards Department or go to the TIA website (www.tiaonline.org) for details on how to request permission. Details are located at: http:/www.tiaonline.org/standards/catalog/info.cfm#copyright or Telecommunications Industry Association Technology (b) there is no assuranc

10、e that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellect

11、ual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder

12、thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instea

13、d left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its

14、contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference

15、 consists of mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy

16、 of encouragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a cla

17、im of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document.

18、ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGH

19、TS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED T

20、O IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DA

21、MAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A

22、 FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. TIA-920.130-A-1 ii Table of Contents 1. SCOPE 2 2. CLAUSE REVISION 2 TIA-920.130-A-1 iiiFOREWORD (This foreword is not part of this Standard.) This document is a TIA Tel

23、ecommunications standard produced by Working Group TR-41.3.3 of Committee TR-41. This standard was developed in accordance with TIA procedural guidelines, and represents the consensus position of the Working Group and its parent Subcommittee TR41.3, which served as the formulating group. The leaders

24、hip of the TR-41.3.3 VoIP and PCM Transmission Performance Working Group (Chair: Allen Woo, Plantronics) acknowledges the written contributions provided by the following individuals in the development of this addendum. Organization Representative TIA-920.130-A-1 Plantronics Allen Woo Editor Whitesel

25、l Consulting Steve Whitesell Suggestions for improvement of this standard are welcome. They should be sent to: Telecommunications Industry Association Engineering Department 2500 Wilson Boulevard Suite 300 Arlington, VA 22201 ( http:/www.tiaonline.org ) TIA-920.130-A-1 iv (this page is intentionally

26、 blank) TIA-920.130-A-1 1INTRODUCTION Since TIA-920.130-A was first published in February 2011, an error was discovered that contributed to the need for an amendment for the standard. The RLR normalizing level for TCLwmeasurement for binaural headset is missing in TIA-920.130-A. Clause 2 of this add

27、endum contains changes to TIA-920.130-A. The information in clause 2 of this document identifies the original clause number in TIA-920.130-A that is to be changed. The other clauses in TIA-920.130-A are not affected. TIA-920.130-A-1 2 Telephone Terminal Equipment Headset Acoustic Performance Require

28、ments Addendum 1 1. SCOPE This addendum only provides changes to TIA-920.130-A, “Telecommunications Telephone Terminal Equipment Transmission Requirement for Wideband Digital Wireline Telephones with Headset”. 2. CLAUSE REVISION Replace clause 5.4.1.1 with the following: 5.4.1.1 Requirements The nor

29、malized value of TCLw shall be greater than 52 dB for packet-based headsets and 45 dB for TDM-based headsets with SLR normalized to 10 dB and RLR normalized to 0 dB for monaural headset or 6 dB for binaural headset. This requirement shall be met for at least one of the two input signal levels specif

30、ied in 5.4.1.2. NOTES: 1. As a calculation example for a monaural headset, if the measured TCLw is 48 dB, the measured SLR is 11 dB and the measured RLR is -2 dB, then the normalized value of TCLw = TCLw measured + (10 - SLR) dB + (0 - RLR) dB = 48 dB + (10 - 11) dB + (0 - (-2) dB = 49 dB. 2. The re

31、quirement of 52 dB for packet-based headsets is a function of the -16 dBm0 test signal level and the -64 dBm0A send noise requirement. Measuring TCLw 52 dB can be difficult. 3. If equipped with adjustable receive level, the un-normalized TCLw will decrease in proportion with the increased gain relat

32、ive to the nominal RLR in most cases. For example, if the measured TCLw is 45 dB at nominal RLR and the adjustable receive level adds 12 dB of gain, then un-normalized TCLw (maximum receive level) = 45 dB - 12 dB = 33 dB. 4. The echo impairment perceived by the person at the far-end of the connectio

33、n from a telephone set is a function of the magnitude of the talker echo signal as well as the talker echo path delay. The echo signal becomes more disturbing as the talker echo path delay increases. Thus, a telephone set with adequate TCLw performance on low delay may not provide satisfactory echo

34、loss for connections that have a long delay. 5. Temporally weighted terminal coupling loss (TCLt) is an alternate method for echo measurement, which may be more subjectively relevant, especially in devices with echo suppression or cancellation features. (See IEEE Std 1329.) The performance requirements may need to be changed when using this method.