TIA-930-2003 Legacy Mobile Station Domain (LMSD) - Step 1《遗留移动台域(LMSD) - 步骤1》.pdf

1、 TIA-930-2003 APPROVED: JANUARY 1, 2003 REAFFIRMED: SEPTEMBER 19, 2013 TIA-930 January 2003Legacy Mobile Station Domain (LMSD) - Step 1 NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchase

2、rs, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of TIA

3、from manufacturing or selling products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accordanc

4、e with the American National Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems asso

5、ciated with its use or all applicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. (From Project No. PN-3-0075-RF1, formulated under the

6、 cognizance of the TIA TR-45 Mobile (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice o

7、f contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claime

8、d and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discus

9、sions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms or conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Man

10、ual have been complied with as respects the Document or its contents. If the Document contains one or more Normative References to a document published by another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specifi

11、cation, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Engineering Manual, 4thedition) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assuranc

12、e relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the o

13、ther SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or monitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or

14、any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NO

15、NINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH

16、EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION A

17、NY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHETHER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBI

18、LITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLISHED BY TIA WITHOUT SUCH LIMITATIONS. TIA-930 Contents 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Contents .ii Figures. iii Revision History.iv 1 Intro

19、duction. 1 2 Acronyms 2 3 References . 3 3.1 TIA/3GPP2 References. 3 3.2 IETF References . 3 3.3 ITU References . 3 4 LMSD Step 1 Network Reference Model 4 5 yy Interface Protocol Reference Model 6 6 RTP Protocol 6 i TIA-930 Figures 1 2 3 4 5 6 7 Figure 1: LMSD Step 1 Network Reference Model 5 Figur

20、e 2: Reference Point yy Protocol Reference Model 6 ii TIA-930 Revision History 1 2 Revision Changes Date 0 Initial Publication January, 2003 3 4 5 iii TIA-930 This Page Intentionally Left Blank iv TIA-930 1 Introduction 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 This standard specif

21、ies the necessary interfaces to support the bearer traffic between Media Gateways in the initial step of the Legacy Mobile Station Domain (LMSD). The requirements for this work are defined in 6, and the overall architecture model is defined in 5. This standard defines bearer support of G.711 PCM enc

22、oded voice over IP as defined in RFC 1890 at a minimum, for use between media gateways in a cdma2000 Legacy Mobile Station Domain. This standard utilizes existing IETF and 3GPP2 protocols when applicable to minimize the new work needed. The necessary signaling needed to setup the bearer paths is def

23、ined in 3. For the initial release of this standard, the following basic capabilities defined in 6 are supported. Enhanced capabilities may be defined in future versions of this standard: The yy interface spans across a managed IP network. The QoS mechanism for the yy interface is not defined in thi

24、s version of the standard. All Security issues between Media Gateways are not defined in this version of the standard. TrFO support over the yy interface is not defined in this version of the standard. Handoffs between LMSD networks are not supported over the yy interface. Handoffs must be supported

25、 using existing TIA/EIA-41 signaling and Inter MSC Trunks. 1 TIA-930 2 Acronyms 1 2 3 4 5 AAA Authorization, Authentication, and Accounting BSC/RNC Base Station Controller/Radio Network Controller BTS Base Transmission Station FA Foreign Agent HA Home AgentIOS Inter-Operability Specification IP Inte

26、rnet ProtocolITU - T International Telecommunications Union - Telephony LMSD Legacy MS Domain MGW Media Gateway MRFP Media Resource Function Processor MS Mobile Station MSCe Mobile Switching Center emulation PCF Packet Control Function PCM Pulse Code Modulation PDSN Packet Data Service Node PSTN Pub

27、lic Switched Telephone Network PT Payload Type QoS Quality of Service RFC Request for Comment R-SGW Roaming Signaling Gateway RTP Real-time Transport Protocol SIP Session Initiated Protocol TrFO Transcoder Free Operation TSG Technical Specification Group T-SGW Trunk Signaling Gateway UDP User Datagr

28、am Protocol 2 TIA-930 3 References 1 2 3 4 5 6 7 8 9 10 3.1 TIA/3GPP2 References 1 TIA/EIA/IS-2001.2-B Interoperability Specification (IOS) for CDMA 2000 Access Network Interfaces Part 2 Transport, May 2002 2 TIA/EIA/IS-2001.4-B Interoperability Specification (IOS) for CDMA 2000 Access Network Inter

29、faces Part 4 (A1, A2, and A5 Interfaces), May 2002 3 TIA-872 IP Network for cdma2000 Spread Spectrum Systems 3GPP2 All-IP Core Network Enhancements For Legacy MS Domain, December 2002 4 TIA/EIA/IS-835-B cdma2000 Wireless IP Network Standard, September 2002 5 3GPP2 S.R0037 IP Network Architecture Mod

30、el for cdma2000 Spread Spectrum Systems, Version 2.0, May 2002 6 3GPP2 S.R0059 Legacy MS Domain Step 1 System Requirements, May 2002 3.2 IETF References RFC 1890 RTP Profile for Audio and Video Conferences with Minimal Control, January 1996 3.3 ITU References G.711 Pulse code modulation (PCM) of voi

31、ce frequencies, November 1988 3 TIA-930 4 LMSD Step 1 Network Reference Model 1 2 3 4 5 6 7 8 9 10 11 12 13 Figure 1 shows the LMSD Step 1 network reference model. The LMSD Step 1 network reference model consists of the following entities: MGW, MRFP, MSCe, HLRe, and SCPe. The functional description

32、of the entities is specified in 5. The PDSN, HA, and AAA shown in Figure 1 for architecture completeness are not used in this standard, nor are they required to support LMSD Step 1. This standard specifies the interface for the reference point yy, which is the bearer path between the MGWs. Other ref

33、erence points required for LMSD Step 1 support include reference points xx, zz and 39. The interfaces for xx, zz and 39 between the controlling entities (MRFP and MSCe) and the MGWs are defined in 3. Any other reference points shown in Figure 1 are not required to support LMSD Step 1 and are therefo

34、re not defined in this standard. 4 TIA-930 Mobile IPHomeAgentAAA21473422394544484027MobileStationcdma2000 Access NetworkBTS4341AccessGatewayPDSN(FA /Attendant)3135BSC/RNC+ PCF14Legacy MS Domain SupportMSCeHLRe SCPeMAPTIA/EIA-41GSMPSTN13MediaResourceFunctionProcessorxxOther LMSDMediaGatewayMSCeMediaG

35、atewayyyzzIPNetworkLegendRadio InterfaceSignaling TrafficBearer Traffic32363742331 2 Figure 1: LMSD Step 1 Network Reference Model 5 TIA-930 5 yy Interface Protocol Reference Model 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Figure 2 shows the protocol stack required on the LMSD Step 1 bearer

36、 path between MGWs (interface yy) using G.711 as an example. The protocol stack for the control plane on the MGW is defined in 3. RN MGW MGWyyIOS A2cdma2000LowerLayersG.711PCM VoiceTranscoderFunctionL1LowerLayersRTPUDPIPG.711PCMVoiceG.711 PCMVoiceL2L1G.711PCMVoiceRTPUDPIPL2MobileStationEncodedVoicec

37、dma2000L1cdma2000L2EncodedVoicecdma2000L1cdma2000L2Figure 2: Reference Point yy Protocol Reference Model 6 RTP Protocol The bearer traffic between the MGWs is defined as G.711 PCM at a minimum. This bearer traffic shall be transported using RTP RFC 1890 as defined in section 6, Table 2: Payload Type

38、s (PT) for standard audio and video encoding. Payload Type 0 is assigned for PCMU, and Payload Type 8 is assigned for PCMA. PCMA and PCMU are specified in ITU-T recommendation G.711. Both PT 0 and PT 8 shall be supported on interface reference point yy. 6 THE TELECOMMUNICATIONS INDUSTRY ASSOCIATION

39、TIA represents the global information and communications technology (ICT) industry through standards development, advocacy, tradeshows, business opportunities, market intelligence and world-wide environmental regulatory analysis. Since 1924, TIA has been enhancing the business environment for broadb

40、and, wireless, information technology, cable, satellite, and unified communications. TIA members products and services empower communications in every industry and market, including healthcare, education, security, public safety, transportation, government, the utilities. TIA is accredited by the American National Standards Institute (ANSI).