TIA-97-H-1[E]-2014 Recommended Minimum Performance Standard for cdma2000 Spread Spectrum Base Stations (Incorporates Addendum 1).pdf

1、 TIA-97-H-1E April 2014Recommended Minimum Performance Standards for cdma2000Spread Spectrum Base Stations NOTICE TIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangea

2、bility and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for their particular need. The existence of such Standards and Publications shall not in any respect preclude any member or non-member of TIA from manufacturing or selling

3、 products not conforming to such Standards and Publications. Neither shall the existence of such Standards and Publications preclude their voluntary use by Non-TIA members, either domestically or internationally. Standards and Publications are adopted by TIA in accordance with the American National

4、Standards Institute (ANSI) patent policy. By such action, TIA does not assume any liability to any patent owner, nor does it assume any obligation whatever to parties adopting the Standard or Publication. This Standard does not purport to address all safety problems associated with its use or all ap

5、plicable regulatory requirements. It is the responsibility of the user of this Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations before its use. Any use of trademarks in this document are for information purposes and do not con

6、stitute an endorsement by TIA or this committee of the products or services of the company. (From Project No. TIA-PN-97-H-1E, formulated under the cognizance of the TIA TR-45 Mobile (b) there is no assurance that the Document will be approved by any Committee of TIA or any other body in its present

7、or any other form; (c) the Document may be amended, modified or changed in the standards development or any editing process. The use or practice of contents of this Document may involve the use of intellectual property rights (“IPR”), including pending or issued patents, or copyrights, owned by one

8、or more parties. TIA makes no search or investigation for IPR. When IPR consisting of patents and published pending patent applications are claimed and called to TIAs attention, a statement from the holder thereof is requested, all in accordance with the Manual. TIA takes no position with reference

9、to, and disclaims any obligation to investigate or inquire into, the scope or validity of any claims of IPR. TIA will neither be a party to discussions of any licensing terms or conditions, which are instead left to the parties involved, nor will TIA opine or judge whether proposed licensing terms o

10、r conditions are reasonable or non-discriminatory. TIA does not warrant or represent that procedures or practices suggested or provided in the Manual have been complied with as respects the Document or its contents. If the Document contains one or more Normative References to a document published by

11、 another organization (“other SSO”) engaged in the formulation, development or publication of standards (whether designated as a standard, specification, recommendation or otherwise), whether such reference consists of mandatory, alternate or optional elements (as defined in the TIA Engineering Manu

12、al, 4thedition) then (i) TIA disclaims any duty or obligation to search or investigate the records of any other SSO for IPR or letters of assurance relating to any such Normative Reference; (ii) TIAs policy of encouragement of voluntary disclosure (see Engineering Manual Section 6.5.1) of Essential

13、Patent(s) and published pending patent applications shall apply; and (iii) Information as to claims of IPR in the records or publications of the other SSO shall not constitute identification to TIA of a claim of Essential Patent(s) or published pending patent applications. TIA does not enforce or mo

14、nitor compliance with the contents of the Document. TIA does not certify, inspect, test or otherwise investigate products, designs or services or any claims of compliance with the contents of the Document. ALL WARRANTIES, EXPRESS OR IMPLIED, ARE DISCLAIMED, INCLUDING WITHOUT LIMITATION, ANY AND ALL

15、WARRANTIES CONCERNING THE ACCURACY OF THE CONTENTS, ITS FITNESS OR APPROPRIATENESS FOR A PARTICULAR PURPOSE OR USE, ITS MERCHANTABILITY AND ITS NONINFRINGEMENT OF ANY THIRD PARTYS INTELLECTUAL PROPERTY RIGHTS. TIA EXPRESSLY DISCLAIMS ANY AND ALL RESPONSIBILITIES FOR THE ACCURACY OF THE CONTENTS AND

16、MAKES NO REPRESENTATIONS OR WARRANTIES REGARDING THE CONTENTS COMPLIANCE WITH ANY APPLICABLE STATUTE, RULE OR REGULATION, OR THE SAFETY OR HEALTH EFFECTS OF THE CONTENTS OR ANY PRODUCT OR SERVICE REFERRED TO IN THE DOCUMENT OR PRODUCED OR RENDERED TO COMPLY WITH THE CONTENTS. TIA SHALL NOT BE LIABLE

17、 FOR ANY AND ALL DAMAGES, DIRECT OR INDIRECT, ARISING FROM OR RELATING TO ANY USE OF THE CONTENTS CONTAINED HEREIN, INCLUDING WITHOUT LIMITATION ANY AND ALL INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, LITIGATION, OR THE LIKE), WHET

18、HER BASED UPON BREACH OF CONTRACT, BREACH OF WARRANTY, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE FOREGOING NEGATION OF DAMAGES IS A FUNDAMENTAL ELEMENT OF THE USE OF THE CONTENTS HEREOF, AND THESE CONTENTS WOULD NOT BE PUBLIS

19、HED BY TIA WITHOUT SUCH LIMITATIONS. 3GPP2 C.S0010-E v2.0 Revision History Rel 0 v1.0 First 3GPP2 Publication Support for cdma2000-0 December 1999 Rev A v1.0 Support for cdma2000-A April 2001 Rev B v1.0 Added Band Classes December 2002 Rev B v2.0 Bug fix March 2004 Rev C v1.0 Support for cdma2000-B

20、February 2005 Rev C v2.0 Bug fix March 2006 Rev D v1.0 Added support for Pico and Femto Cells September 2010 Rev E v1.0 Added 1rx femto fading channel tests, and 1x Rev.E tests. Add Japan Radio Law related changes. December 2011 Rev E v2.0 Bug fixes. March 2014 3GPP2 C.S0010-E v2.0 CONTENTS i FOREWO

21、RD xv 1 NOTES xv 2 1 INTRODUCTION 1-1 3 1.1 Scope 1-1 4 1.2 Terms and Definitions . 1-1 5 1.3 Test Modes 1-10 6 1.4 Normative References 1-12 7 2 STANDARD EMISSIONS MEASUREMENT PROCEDURES . 2-1 8 2.1 Radiated Emissions Measurement . 2-1 9 2.1.1 Standard Radiation Test Site 2-1 10 2.1.2 Search Antenn

22、a 2-1 11 2.1.3 Field-Strength Measurement . 2-2 12 2.1.4 Frequency Range of Measurements . 2-2 13 2.1.5 Test Ranges 2-2 14 2.1.5.1 30-Meter Test Range 2-2 15 2.1.5.2 3-Meter Test Range 2-3 16 2.1.6 Radiated Signal Measurement Procedures 2-3 17 2.2 AC Power Line Conducted Emissions Measurement 2-4 18

23、 2.2.1 Standard AC Power Line Conducted Emissions Test Site 2-4 19 2.2.2 Line Impedance Stabilization Network (LISN) Unit 2-4 20 2.2.3 Standard Test Site Measurements 2-5 21 2.2.3.1 Floor Standing Equipment . 2-5 22 2.2.3.2 Table Top Mounted Equipment 2-5 23 2.2.3.3 Measurement Procedure 2-5 24 2.2.

24、3.4 Frequency Range of Measurements 2-5 25 2.2.4 End User or Manufacturing Plant Test Sites . 2-5 26 3 CDMA RECEIVER MINIMUM STANDARDS 3-1 27 3.1 Frequency Coverage Requirements 3-1 28 3.2 Access Probe Acquisition . 3-1 29 3.2.1 Definition 3-1 30 3.2.2 Method of Measurement . 3-1 31 3GPP2 C.S0010-E

25、v2.0 CONTENTS ii 3.2.2.1 Access Channel Probe Acquisition . 3-1 1 3.2.2.2 Enhanced Access Channel Probe Acquisition . 3-2 2 3.2.3 Minimum Standard 3-4 3 3.3 Reverse Common Control Channel Demodulation Performance . 3-5 4 3.3.1 Performance in Additive White Gaussian Noise . 3-5 5 3.3.1.1 Definition 3

26、-5 6 3.3.1.2 Method of Measurement 3-5 7 3.3.1.3 Minimum Standard . 3-7 8 3.3.2 Performance in Multipath Fading with Closed Loop Power Control . 3-8 9 3.3.2.1 Definition 3-8 10 3.3.2.2 Method of Measurement 3-8 11 3.3.2.3 Minimum Standard . 3-10 12 3.4 Reverse Channel Quality Indicator Channel Demod

27、ulation Performance . 3-10 13 3.4.1 Performance in Additive White Gaussian Noise . 3-10 14 3.4.1.1 Definition 3-10 15 3.4.1.2 Method of Measurement 3-10 16 3.4.1.3 Minimum Standard . 3-11 17 3.4.2 Performance in Multipath Fading with Closed Loop Power Control . 3-12 18 3.4.2.1 Definition 3-12 19 3.4

28、.2.2 Method of Measurement 3-12 20 3.4.2.3 Minimum Standard . 3-13 21 3.5 Reverse Acknowledgment Channel Demodulation Performance . 3-14 22 3.5.1 Performance in Additive White Gaussian Noise . 3-14 23 3.5.1.1 Definition 3-14 24 3.5.1.2 Method of Measurement 3-14 25 3.5.1.3 Minimum Standard . 3-15 26

29、 3.5.2 Performance in Multipath Fading with Closed Loop Power Control . 3-15 27 3.5.2.1 Definition 3-15 28 3.5.2.2 Method of Measurement 3-16 29 3.5.2.3 Minimum Standard . 3-17 30 3.6 Reverse Traffic Channel Demodulation Performance . 3-17 31 3GPP2 C.S0010-E v2.0 CONTENTS iii 3.6.1 Performance in Ad

30、ditive White Gaussian Noise . 3-17 1 3.6.1.1 Definition . 3-17 2 3.6.1.2 Method of Measurement 3-17 3 3.6.1.3 Minimum Standard 3-19 4 3.6.2 Performance in Multipath Fading without Closed Loop Power Control . 3-19 5 3.6.2.1 Definition . 3-19 6 3.6.2.2 Method of Measurement 3-19 7 3.6.2.3 Minimum Stan

31、dard 3-20 8 3.6.3 Performance in Multipath Fading with Closed Loop Power Control 3-21 9 3.6.3.1 Definition . 3-21 10 3.6.3.2 Method of Measurement 3-21 11 3.6.3.3 Minimum Standard 3-22 12 3.7 Reverse Acknowledgment Channel 1 Demodulation Performance 3-23 13 3.7.1 Performance in Additive White Gaussi

32、an Noise . 3-23 14 3.7.1.1 Definition . 3-23 15 3.7.1.2 Method of Measurement 3-23 16 3.7.1.3 Minimum Standard 3-24 17 3.7.2 Performance in Multipath Fading with Closed Loop Power Control 3-24 18 3.7.2.1 Definition . 3-24 19 3.7.2.2 Method of Measurement 3-24 20 3.7.2.3 Minimum Standard 3-25 21 3.8

33、Receiver Performance 3-26 22 3.8.1 Receiver Sensitivity . 3-26 23 3.8.1.1 Definition . 3-26 24 3.8.1.2 Method of Measurement 3-26 25 3.8.1.3 Minimum Standard 3-27 26 3.8.2 Receiver Dynamic Range . 3-27 27 3.8.2.1 Definition . 3-27 28 3.8.2.2 Method of Measurement 3-27 29 3.8.2.3 Minimum Standard 3-2

34、8 30 3.8.3 Single Tone Desensitization 3-28 31 3GPP2 C.S0010-E v2.0 CONTENTS iv 3.8.3.1 Definition 3-28 1 3.8.3.2 Method of Measurement 3-28 2 3.8.3.3 Minimum Standard . 3-30 3 3.8.4 Intermodulation Spurious Response Attenuation . 3-30 4 3.8.4.1 Definition 3-30 5 3.8.4.2 Method of Measurement 3-31 6

35、 3.8.4.3 Minimum Standard . 3-33 7 3.8.5 Adjacent Channel Selectivity 3-33 8 3.8.5.1 Definition 3-33 9 3.8.5.2 Method of Measurement 3-33 10 3.8.5.3 Minimum Standard . 3-34 11 3.8.6 Receiver Blocking . 3-34 12 3.8.6.1 Definition 3-34 13 3.8.6.2 Method of Measurement 3-34 14 3.8.6.3 Minimum Standard

36、. 3-36 15 3.9 Limitations on Emissions 3-36 16 3.9.1 Conducted Spurious Emissions 3-36 17 3.9.1.1 Definition 3-36 18 3.9.1.2 Method of Measurement 3-36 19 3.9.1.3 Minimum Standard . 3-37 20 3.9.2 Radiated Spurious Emissions . 3-38 21 3.10 Received Signal Quality Indicator (RSQI) . 3-38 22 3.10.1 Def

37、inition . 3-38 23 3.10.2 Method of Measurement . 3-38 24 3.10.3 Minimum Standard 3-40 25 4 CDMA TRANSMITTER MINIMUM STANDARDS . 4-1 26 4.1 Frequency Requirements . 4-1 27 4.1.1 Frequency Coverage . 4-1 28 4.1.2 Frequency Tolerance 4-1 29 4.1.2.1 Definition 4-1 30 4.1.2.2 Method of Measurement 4-1 31

38、 3GPP2 C.S0010-E v2.0 CONTENTS v 4.1.2.3 Minimum Standard 4-1 1 4.2 Modulation Requirements . 4-1 2 4.2.1 Synchronization and Timing . 4-2 3 4.2.1.1 Pilot Time Tolerance . 4-2 4 4.2.1.1.1 Definition . 4-2 5 4.2.1.1.2 Method of Measurement . 4-2 6 4.2.1.1.3 Minimum Standard 4-2 7 4.2.1.2 Pilot Channe

39、l to Code Channel Time Tolerance 4-3 8 4.2.1.2.1 Definition . 4-3 9 4.2.1.2.2 Method of Measurement . 4-3 10 4.2.1.2.3 Minimum Standard 4-3 11 4.2.1.3 Pilot Channel to Code Channel Phase Tolerance 4-4 12 4.2.1.3.1 Definition . 4-4 13 4.2.1.3.2 Method of Measurement . 4-4 14 4.2.1.3.3 Minimum Standar

40、d 4-4 15 4.2.2 Waveform Quality . 4-4 16 4.2.2.1 Definition . 4-4 17 4.2.2.2 Method of Measurement 4-4 18 4.2.2.3 Minimum Standard 4-5 19 4.2.3 Forward Power Control Subchannel 4-5 20 4.2.3.1 Definition . 4-5 21 4.2.3.2 Method of Measurement 4-5 22 4.2.3.3 Minimum Standard 4-8 23 4.3 RF Output Power

41、 Requirements 4-8 24 4.3.1 Total Power . 4-8 25 4.3.1.1 Definition . 4-8 26 4.3.1.2 Method of Measurement 4-8 27 4.3.1.3 Minimum Standard 4-9 28 4.3.2 Pilot Power 4-9 29 4.3.2.1 Definition . 4-9 30 4.3.2.2 Method of Measurement 4-9 31 3GPP2 C.S0010-E v2.0 CONTENTS vi 4.3.2.3 Minimum Standard . 4-9 1

42、 4.3.3 Code Domain Power . 4-9 2 4.3.3.1 Definition 4-9 3 4.3.3.2 Method of Measurement 4-10 4 4.3.3.3 Minimum Standard . 4-10 5 4.3.4 Femto Cell Transmission Authorization 4-11 6 4.3.4.1 Definition 4-11 7 4.3.4.2 Method of Measurement 4-11 8 4.3.4.3 Minimum Standard . 4-12 9 4.4 Limitations on Emis

43、sions 4-12 10 4.4.1 Conducted Spurious Emissions 4-12 11 4.4.1.1 Macro Cell Base Station . 4-12 12 4.4.1.1.1 Definition . 4-12 13 4.4.1.1.2 Method of Measurement 4-12 14 4.4.1.1.3 Minimum Standard . 4-13 15 4.4.1.2 Pico Cell Base Station and Femto Cell . 4-18 16 4.4.1.2.1 Definition . 4-18 17 4.4.1.

44、2.2 Method of Measurement 4-19 18 4.4.1.2.3 Minimum Standard . 4-21 19 4.4.2 Radiated Spurious Emissions . 4-26 20 4.4.3 Inter-Base Station Transmitter Intermodulation . 4-27 21 4.4.3.1 Definition 4-27 22 4.4.3.2 Method of Measurement 4-27 23 4.4.3.3 Minimum Standard . 4-27 24 4.4.4 Occupied Bandwid

45、th 4-27 25 4.4.4.1 Definition 4-28 26 4.4.4.2 Method of Measurement 4-28 27 4.4.4.3 Minimum Standard . 4-28 28 5 CDMA GENERAL REQUIREMENTS . 5-1 29 5.1 Temperature and Power Supply Voltage 5-1 30 5.1.1 Definition . 5-1 31 3GPP2 C.S0010-E v2.0 CONTENTS vii 5.1.2 Method of Measurement . 5-1 1 5.1.3 Mi

46、nimum Standard . 5-1 2 5.2 High Humidity . 5-2 3 5.2.1 Definition 5-2 4 5.2.2 Method of Measurement . 5-2 5 5.2.3 Minimum Standard . 5-2 6 5.3 AC Power Line Conducted Emissions . 5-2 7 5.3.1 Definition 5-2 8 5.3.2 Method of Measurement . 5-3 9 5.3.3 Minimum Standard . 5-3 10 6 CDMA STANDARD TEST CON

47、DITIONS . 6-1 11 6.1 Standard Equipment . 6-1 12 6.1.1 Basic Equipment 6-1 13 6.1.2 Associated Equipment 6-1 14 6.2 Standard Environmental Test Conditions 6-1 15 6.3 Standard Conditions for the Primary Power Supply . 6-1 16 6.3.1 General . 6-1 17 6.3.2 Standard DC Test Voltage from Accumulator Batte

48、ries . 6-1 18 6.3.3 Standard AC Voltage and Frequency . 6-2 19 6.4 Standard Test Equipment 6-2 20 6.4.1 Channel Simulator 6-2 21 6.4.2 Waveform Quality Measurement Equipment . 6-5 22 6.4.2.1 Rho Meter 6-5 23 6.4.2.2 Code Domain Measurement Equipment . 6-7 24 6.4.3 Mobile Station Simulator 6-9 25 6.4

49、.4 AWGN Generator 6-9 26 6.4.5 CW Generator . 6-10 27 6.4.6 Spectrum Analyzer 6-10 28 6.4.7 Average Power Meter . 6-11 29 6.4.8 RF Output Load 6-11 30 6.5 Test Setups . 6-12 31 3GPP2 C.S0010-E v2.0 CONTENTS viii 6.5.1 Functional System Setups 6-12 1 6.5.2 Test Model for Base Station 6-17 2 6.5.3 General Comments . 6-19 3 6.6 Standard Duty Cycle . 6-20 4 6.7 Frame Error Rate Measurement 6-20 5 6.8 Confidence Limits . 6-21 6 ANNEX A PERFORMANCE REQUIREMENTS . A-1 7 A.1 Access Channel and Enhanced Access Channel Performance . A-1 8 A.2 Reverse Common Control Channel Performance . A-