UFC 1-300-09N CHANGE 8-2011 DESIGN PROCEDURES.pdf

1、UFC 1-300-09N 25 May 2005 Including Change 8, 17 February 2011 UNIFIED FACILITIES CRITERIA (UFC) DESIGN PROCEDURES APPROVED FOR PUBLIC RELEASE; DISTRIBUTION UNLIMITED Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-UFC 1-300-09N 25 May 2005 Including

2、 Change 8, 17 February 2011 UNIFIED FACILITIES CRITERIA (UFC) DESIGN PROCEDURES Any copyrighted material included in this UFC is identified at its point of use. Use of the copyrighted material apart from this UFC must have the permission of the copyright holder. U.S. ARMY CORPS OF ENGINEERS NAVAL FA

3、CILITIES ENGINEERING COMMAND (Preparing Activity) AIR FORCE CIVIL ENGINEER SUPPORT AGENCY Record of Changes (changes are indicated by 1 . /1/) Change No. Date Location 1 22 Feb 2006 Paragraph 2-2 (metric policy reference changed) 2 4 Dec 2006 Throughout - added requirements from Draft UFC 1-300-10N.

4、 3 20 June 2007 Throughout - added Sustainable Design guidance 4 18 Oct 2007 Added requirements for Facility Recognition Plaque 5 13 Apr 2009 Corrected instructions to access NAVFAC CADD Resources, Signature Procedures, CAD manual references, use of DrChecks, sustainable design standards, and minor

5、revisions of the geotechnical and structural sections. 6 5 May 2009 Added paragraph on Accessibility (2-3) 7 27 January 2010 Changed all references from UFC 3-300-10N “Structural Engineering“ to UFC 3-301-01 “Structural Engineering“; changed IBC 2003 to IBC 2006 8 17 February 2011 Throughout Updated

6、 metric policy, added dual language and code compliance requirements, minor revisions to geotechnical and design deliverable sections. _ This UFC supersedes Military Handbook 1006/1, dated 15 June 1995. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,

7、-UFC 1-300-09N 25 May 2005 Including Change 8, 17 February 2011 FOREWORD The Unified Facilities Criteria (UFC) system is prescribed by MIL-STD-3007 and provides planning, design, construction, sustainment, restoration, and modernization criteria, and applies to the Military Departments, the Defense

8、Agencies, and the DoD Field Activities in accordance with USD (AT UFGS 01 33 10.05 20, Design Submittal Procedures; and Section 01 45 00.05 20, Design and Construction Quality Control. o For Design-Build contracts: Part Three Project Program, Chapter 1, Project Description, and Chapter 2, Program Ob

9、jectives, and additional design requirements. Use the U. S. Green Building Councils LEED Green Building Rating System as a tool to apply sustainable development principles and as a metric to measure the sustainability achieved throughout the planning, design and construction processes. Projects that

10、 must meet this certification are described in5 ECB 2008-1 /5/. These projects must meet the LEED 5 Silver /5/ level; unless justifiable conditions exist that limit the pursuit and accomplishment of the LEED credits necessary for achieving the Certified level. The Government determines the minimum s

11、ustainable LEED goals and verification methods. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-UFC 1-300-09N 25 May 2005 Including Change 8, 17 February 2011 4 2-5 PHYSICAL SECURITY AND ANTITERRORISM. DoD Instruction 2000.16, DoD Antiterrorism (AT)

12、Standards and OPNAV Instruction 3300.53A, Navy Antiterrorism Program, establish the policy for Physical Security and Antiterrorism. Design inhabited buildings to meet the requirements of UFC 4-010-01, DoD Minimum Antiterrorism Standards for Buildings; UFC 4-010-02, DoD Minimum Antiterrorism Standoff

13、 Distances for Buildings; and Combatant Commander Anti-terrorism/Force Protection construction standards. It is important to remember that the project documents provide only the minimum amount of information necessary for the installation of all elements required for force protection and must not co

14、ntain information on force protection methods, philosophy, or information on design threats, as this information is considered sensitive and for official use only. 2-5.1 DoD Minimum Antiterrorism Standards for Buildings. UFC 4-010-01 and UFC 4-010-02 (For Official Use Only FOUO) establish standards

15、that provide minimum levels of protection against terrorist attacks for the occupants of all DoD inhabited buildings. These UFC are intended to be used by security and antiterrorism personnel and design teams to identify the minimum requirements that must be incorporated into the design of all new c

16、onstruction and major renovations of inhabited DoD buildings. They also include recommendations that should be, but are not required to be incorporated into all such buildings. 2-5.2 Security Engineering Facilities Planning Manual. UFC 4-020-01, Security Engineering Facilities Planning Manuel, prese

17、nts processes for developing the design criteria necessary to incorporate security and antiterrorism into DoD facilities and for identifying the cost implications of applying those design criteria. The design criteria may be limited to the requirements of the minimum standards, or they may include o

18、ne of four issues as described below. Protection of assets other than those addressed in the minimum standards (people). Aggressor tactics that are not addressed in the minimum standards. Levels of protection beyond those required by the minimum standards. The cost implications for security and anti

19、terrorism are addressed as cost increases over conventional construction for common construction types. The changes in construction represented by those cost increases are tabulated for reference, but they represent only representative construction that will meet the requirements of the design crite

20、ria. The manual also addresses the tradeoffs between cost and risk. UFC 4-020-01 is intended to be used by planners as well as security and antiterrorism personnel with support from planning team members. 2-6 OWNERSHIP OF PROJECT DOCUMENTS. The clauses set forth in DFAR 252.227-7023, Drawings and Ot

21、her Data to Become Property of Government, DFAR 227.71, Rights in Technical Data, and DFAR 227.72 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-UFC 1-300-09N 25 May 2005 Including Change 8, 17 February 2011 5 Rights in Computer Software and Compute

22、r Software Documentation, apply to all project design documents. 2-7 REGISTRATION. Develop stateside project documents under the direction of a Registered Architect or a Professional Engineer currently licensed in accordance with FAR 52-236-25, Requirements for Registration of Designers. Develop for

23、eign project documents under the direction of a Registered Architect or a Professional Engineer currently licensed by a United States state, commonwealth, or territory, the District of Columbia, or by the foreign country in which the project is to be built. Each drawing shall only be signed, sealed,

24、 and dated by the Registered Architect or the Professional Engineer who is registered to practice in the particular field involved for work depicted on that drawing, serves as the Designer of Record for that work, and complies with requirements of FAR 52.236-26. Sign Record Documents in accordance w

25、ith Electronic Design Deliverable requirements. 2-7.1 Certification. Where special certifications are required for the design, certify in accordance with the contract and local requirements. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-UFC 1-300-0

26、9N 25 May 2005 Including Change 8, 17 February 2011 6 CHAPTER 3 DEVELOPMENT OF DESIGN-BUILD REQUEST FOR PROPOSAL (RFP) The Design-Build (DB) RFP may utilize part of the Predesign phase to help define acceptable options for the project, or may strictly state functional requirements, which allows maxi

27、mum design flexibility for the Design-Build Contractor. Stating functional requirements is preferred; however, mold the process to meet the needs of the using activity. Requirements in this chapter are for RFP Development only. 3-1 DESIGN-BUILD REQUEST FOR PROPOSAL PREPARATION AND LAYOUT. Guidance o

28、n preparing the RFP for Design-Build projects is available on the NAVFAC Design-Build Master web site (http:/www.wbdg.org/ndbm.) This site is intended to (1) familiarize those new to the Design-Build process with the RFP format and typical RFP specification sections and (2) allow those preparing a D

29、esign-Build RFP to download the electronic documents. The Design-Build RFP web site is organized using tabs for the major topics of a DB RFP, including Design Guidance and Parts. Within each tabbed section are the structures for the various categories of information in that section. A description of

30、 the documents in each Part is provided at each Part tab. The RFP must include all six RFP Parts indicated below unless they are not applicable to the project. The typical facility project will have information in every RFP Part, with the possible exception of RFP Part Five, “Prescriptive Specificat

31、ions.” Typically, Part One is not 5 prepared by the RFP developer, but is provided by the Acquisition office after RFP parts Two through Six have been completed by the RFP developer /5/. Verify with the NAVFAC Facility Engineering Command if space and tabs should be provided in the RFP for Part One.

32、 Part One includes the Proposal Form and Documents and specifies the contractual requirements. Part Two contains the General Requirements Specification Sections some only available at the Design-Build website. Part Three contains the Project Program for the project. Part Four contains the Performanc

33、e Technical Specifications. Part Five contains any Prescriptive Specifications required for the Design-Build RFP. Part Six is for Attachments (e.g., Boring Logs, reference drawings). 3-1.1 Combining Multiple RFPs into One Bid Package. Refer to Chapter 5 for guidance, when multiple RFPs are combined

34、into one solicitation package. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-UFC 1-300-09N 25 May 2005 Including Change 8, 17 February 2011 7 3-2 PROJECT INFORMATION FORM (PIF). Provide and complete the PIF for Prefinal and Final submittals. PIF is

35、 available electronically at the Whole Building Design Guide website, located at www.wbdg.org/ccb under Specifications Library-NAVFAC Specifications. 3-3 ELECTRONIC DESIGN DELIVERABLES. Provide RFP electronically in accordance with Chapter 7, Electronic Design Deliverables. Organize the RFP into one

36、 or two PDF files, with order shown in the following Table of Contents. Bookmark each item below, and the additional items indicated. 1. RFP Coversheet 2. PART 1 Divider (when directed by the Command) 3. Overall, RFP Table of Contents (Parts 2-6) 4. PART 2 Divider a. Part 2 Table of Contents b. Part

37、 2 Specification Sections (bookmark first page of each section) 5. PART 3 Divider a. Part 3 Project Program Coversheet b. Part 3 Table of Contents c. Part 3 Project Program 6. PART 4 Divider a. Part 4 Table of Contents b. Part 4 Performance Technical Specifications (bookmark first page of each PTS)

38、7. PART 5 Divider (if prescriptive specifications are included in the RFP) a. Part 5 Table of Contents b. Part 5 Specification Sections (bookmark first page of each section) 8. PART 6 Divider a. Part 6 Table of Contents b. Attachments (bookmark first page of each attachment) Provided by IHSNot for R

39、esaleNo reproduction or networking permitted without license from IHS-,-,-UFC 1-300-09N 25 May 2005 Including Change 8, 17 February 2011 8 CHAPTER 4 DRAWINGS 4-1 REQUIREMENTS. Prepare drawings in accordance with Chapter 7, “Electronic Design Deliverables“ and as required herein. 4-2 PRESENTATION. Dr

40、awings shall be consistent in presentation and format. If one discipline shows material selections directly on the details, other disciplines should conform to that format, and not use numbers to refer to a numerical legend elsewhere on the drawings. 4-3 DRAWING NUMBERS. Request NAVFAC drawing numbe

41、rs from the Government Project Manager or the Design Manager. Provide them with the following information: 1) The amount of numbers required, 2) The eProjects or Maximo Work Order Number, and 3) The project title. Request enough numbers (usually 10% more) that additional sheets can be added if neces

42、sary. 4-4 PROPER USE OF NOTES ON DRAWINGS. Be consistent with grammar used in notes on drawings. Wherever possible use 5 imperative /5/ statements to describe work to be accomplished by Contractor. For example, instead of using “Contractor shall provide,” use “provide.” It is understood that the not

43、es are written for the Contractors action. Do not use “to be” for describing work that will be accomplished by the Contractor. “To be” implies that someone will accomplish the work other than the Contractor, such as the Government or another Contractor. If work is to be accomplished by Government, f

44、or example, say “Government will remove storage building prior to start of construction.” Do not use “install” for work that is to be accomplished by the Contractor. “Install” means Government or others will furnish equipment or materials and Contractor will install. “Furnish” means Contractor shall

45、 only furnish; Government or others will install. Use “provide” when the Contractor is to furnish and install equipment and materials. Do not use “proposed” for new construction. “Proposed” means future work by others or work not in this contract. Do not use “new” for work in the contract. All work

46、shown on the drawings is considered new, unless indicated otherwise. Inconsistent use of “new” throughout the drawings could mean that only some of the work is required. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-UFC 1-300-09N 25 May 2005 Includ

47、ing Change 8, 17 February 2011 9 Do not use ambiguous statements that cannot be enforced by the inspector during construction. For example: “grade to drain;” “hand excavate carefully;” “provide materials in good condition.” Be careful with statements like “remove and replace,” which means to remove

48、old item or material and replace that item or material when work is completed. This statement would be appropriate for work in a pump station where pumps were removed prior to the work and those same pumps replaced after the work is completed. On the contrary, if a portion of a concrete walk is cracked and requires replacement, say “remove and provide concrete walk.” When referring to requirement for coordination between Contractor and Government agency, for example, use “coordinate utility connection with Contracting Officer;” do not use words such as “Navy,” “ROICC,” or “PWD” f